Isenberg ECOMATIC 160.2000 User manual

• Youmustobservealllocalplumbinglawsandcodes.
• Donotinstalvalveifitdoesnotmeetlocalplumbingcodes.
• Shuto󱐯themainwatersupply.
NOTICE TO HOMEOWNER
BEFORE YOU BEGIN
• Werecommendthatthisproductisinstalledbyaqualied
professionalplumber.
• Pleasecheckthisproductimmediatelytoensurethatithas
notbeendamagedandiscomplete.Beforeinstallation,please
makesurethisproductisthecorrectmodelandyouhaveall
thepartsrequiredforinstallationanduse.
• Pleaseushthewatersystemtoensurethatnometalswarf,
solder,andotherimputitiescanentertheproduct.
• Turno󱐯watersupplybeforecommencingwork.
• Pleasereadtheseinstructionscarefullyandretainforfuture
reference.
8” Widespread Lavatory Faucet
Installation Manual For 160.2000
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

2
Installation Manual For 160.2000
8” Widespread Lavatory Faucet
TABLE OF CONTENTS
OPERATINGSPECIFICATIONS. . . . . . . . . . . . . . .3
INSTALLINGTHEHOT&COLDHANDLES. . . . . . . . . . . . 4
INSTALLINGTHETUBSPOUT. . . . . . . . . . . . . . .6
INSTALLINGTHEHOSES. . . . . . . . . . . . . . . . 7
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

3
This product is to be used with water
at a temperature range of 40°F - 120°F
ONLY!
This product is to be used with a water
pressure range of 15 PSI to 80 PSI ONLY
If water pressure is greater than 80 PSI,
install a pressure reducer valve (PRV)
WATER TEMPERATURE WATER PRESSURE
OPERATING SPECIFICATIONS
ThisvalvemeetsorexceedsANSIA112.18.1andASSE1016
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

4
INSTALLING THE HOT & COLD HANDLES
Removehandlefromvalve
Insertvalveinto1-3/8”holefrombelowthedeck
IInstallnutandwashersontovalve
Installbodyfromtopofdeckandtwisttotighten
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

5
INSTALLING THE HOT & COLD HANDLES
Tightennutandscrewsfrombottomofdeck Twisttoverifysmoothoperation
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

6
INSTALLING THE TUB SPOUT
Thespoutisseenabove
Insertspoutintodeckhole,theninsertwasherand
tightenretainingnut&T-tting
RemoveT-tting
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury

7
INSTALLING THE HOSES
ConnectHot-sideconnection ConnectCold-sideconnection
www.isenbergfaucets.com
Ver. 2.53
Made For Responsible Luxury