7
CHARGING THE UNIT
Charging the Battery:
This unit can be charged through the included
USB cable.
To charge the unit, connect the Micro-USB end
of the included cable to the unit and the other
end to the supplied plug adaptor, and connect
the adaptor to an active mains outlet. A red
LED indicator will light up to indicate the unit is
charging, and go o once it is fully charged.
NOTE: The camera can be used as normal
while charging.
Accessing and Removing the Battery:
The camera’s rechargeable battery is located
at the bottom of the unit, and can be removed
if necessary.
To access and remove the rechargeable
battery, slide a nail or small object, such as
a pen tip or paperclip, underneath the small
recessed tab at one end of the battery cover
and push upwards to release it. Once the tab
has been unlocked, slide the battery cover
away from the main body of the unit to reveal
the battery inside.
To remove the battery from the camera, hold
the protruding ap at the top and carefully pull
it upwards to lift the battery up and out from
inside the unit.
Replacing the Battery:
To replace the camera’s battery should it run
out, begin by following the steps detailed above
to remove the empty battery from the unit.
Once the old battery has been removed,
carefully slide the replacement into the battery
compartment, ensuring it is installed correctly.
The battery has been correctly installed when
the pull-up ap is facing towards the front of
the camera.
NOTE: Take care to ensure the replacement
battery is of the right type and voltage;
otherwise, the camera may not function
correctly.
WI-FI
Connecting the Camera to Wi-Fi:
To turn on the unit’s Wi-Fi functionality, long-
press the ‘Up’ button on the unit’s control
panel. A Wi-Fi symbol will appear to indicate
this function has been turned on, and the
unit’s Wi-Fi information will be displayed on the
screen.
The unit’s network identication is ‘i67003’.
The security password is 0123456789.
Using the Wi-Fi Function:
Once the Wi-Fi function has been activated,
you can control the unit’s functionality remotely
through the dedicated Sports XVD app,
downloadable from Google Play or the Apple
Store.
Once this app has been downloaded, use your
Wi-Fi connection to sync it with the camera’s
wireless function.
You can now use your smart device as
a screen to preview and shoot remote
photography or video, cycle through your
saved media les at a distance, download les
onto your phone, delete les from the camera’s
memory or share your photos and videos
online.
USING YOUR APPLIANCE
Turning the Unit On and O:
Long-press the ON/OFF button at the front of
the unit to turn it on. A musical cue will play
and the message ‘Welcome’ will appear on the
screen to indicate the unit is on.
Long-press this button again while the unit is in
operation to turn it o. A musical cue will play
and the message ‘Bye bye’ will appear on the
screen before the unit turns itself o.
Mode Selection:
This unit is equipped with photography
and video functions, as well as time-lapse
photography and slow-motion video options.
You can also view your photos and videos
or change the unit’s settings via the mode
selection menu.
