iVigil TD054AA User manual

Color Speed Dome Camera
Manual

1
Contents
1. Safety Precautions....................................................................................2
2. Symbol Description ...................................................................................3
3. Features....................................................................................................4
4. Package List .............................................................................................5
5. Component and Structure Description ......................................................6
6. Camera Setting .........................................................................................8
7. Installation...............................................................................................13
8. System Assembly....................................................................................15
9. Operation………………………………………………………………………16
10. OSD Operational Description................................................................20
11. Quick Operational Reference Table.......................................................22
12. Appendix ...............................................................................................24
13. Specifications ........................................................................................25
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information herein.
Ver.: 1.0, P/N: R040072D

2
1. Safety Precautions
WARNING: This symbol is intended to alert the user to the presence of
un-insulated “ dangerous voltage”.
CAUTION: This symbol is intended to alert the user to presence of important
operating and maintenance (Servicing) instructions in the literature
accompanying the appliance.
Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate
collection systems).
This symbol on the product or on its packaging indicates that this product shall not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be
caused by inappropriate waste handling of this product. The recycling of materials
will help to conserve natural resources. For more detailed information about
recycling of this product, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise poor image
quality may occur.
Please take extreme care when cleaning the dome surface. The plastic
material that the dome is made of is, by necessity, relatively soft and prone
to nicks and scratches which will impair vision through the dome.
Do not plug and unplug the power cord, it may result product malfunction.
Make sure to use only the power source specified in the specification.
Before operation, please make sure that the product has been properly installed.
It is advised to read the Safety Precaution Guide through carefully
before operating the product, to prevent any possible danger.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION :
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT OPEN COVERS (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

3
2.SymbolDescription
1. Function keys are shown by, framed capital boldface print letters.
Example: ENTER ,AUTO FOCUS , etc.
2. Function key “+” indicates the order sequence.
Example: 2 8 + ENTER meaning, press the function key “ 2 “,
“ 8 ”, and then ENTER .
3. ⎥
⎦
⎤
⎢
⎣
⎡_:001DEVICE Indicate messages from the device and is shown
on the control keyboard LCD display.
4. “n” indicates the ID number of the nth device (ID numbers ranges from
001~127).

4
3.Features
zSpeedy response with 22x optical auto-focus zoom lens and 16x
Electronic Zoom or 35x optical auto-focus zoom lens and 16x
Electronic Zoom.
zDay & Night (IR Cut Filter Change Mechanism).
zAuto Iris and Manual Iris Control.
zAdvanced DSP Camera, including Auto White Balance, Backlight
Compensation and Auto Iris Control.
z360° Continuous Pan Rotation.
z128 Preset Points Setup.
zAuto pan at pre-set point.
zPan Speed up to 300°/Sec and Tilt Speed up to 200°/Sec.
zHorizontal Rotation of 180°.
zBuilt in 6 Alarm Inputs and one Relay Output.
zTwo types of Alarm out signal are provided: NO and NC.
zRemote Control via RS-485.
zConnects up to 127 Speed Dome Cameras.
zSupports PELCO Protocol (D and P Protocol).
zPC control software is applicable.
zIndoor Type Power Input: DC12V
Outdoor Type Power Input: AC24V or DC12V
zBuilt-in heater and fan to maintain camera in normal operating
temperature (for outdoor type only).
zSuitable for installation on different occasions:
Indoor Type - can be flush mounted on a ceiling or in the ceiling with
only the dome showing.
Outdoor Type - can be wall mounted or pendant mounted (option:
corner mounted).

5
4. Package List
Indoor Type:
1. DC adapter x1
2. Power Line x1
3. Power connector x1
4. 6P4C - 3M/ white double headed phone line x1
5. M3x4 screw x6 (In-Ceiling/ Flush Mount)
6. In-Ceiling Fixed Ring x2 (In-Ceiling Mount)
7. 35mm pillar of copper x3 (In-Ceiling Mount)
8. 40mm pillar of copper x3 (In-Ceiling Mount)
9. 45mm pillar of copper x3 (In-Ceiling Mount)
10. Embellished flush cover x1 (Flush Mount)
11. Embellished In-Ceiling Cover x1 (In-Ceiling Mount)
12. User’s Manual x1
Outdoor Type:
DC12V TYPE
1. DC Adaptor (x1)
2. Power Line (x1)
3. Power Connector (x1)
AC24V TYPE
1. Power Connector (x1)
Wall Mount
1. 3mm L-Wrench (x1)
2. 4mm L-Wrench (x1)
3. M4x22 Stainless Steel Screw (x5)
4. M8 Screw + Anchor (x5)
5. M3X4 Screw (x6)
6. Wall Mount Housing (x1)
7. Manual (x1)
Pendant Mount
1. 3mm L-Wrench (x1)
2. 4mm L-Wrench (x1)
3. M4x22 Stainless Steel Screw (x5)
4. M8 Screw + Anchor (x5)
5. Manual (x1)

6
5. Component and Structure Description
Indoor Type
① Transparent Cover/ Black Housing
② Machine Housing
③ Embellish Cover
④ ID Number/ Protocol/ Baud Rate Setting (Please Refer to Pg8-9).
⑤ Alarm Input or Output / Video Output / Power Input Terminal (Please
Refer to Pg11)

7
Outdoor Type
① Wall Mount Bracket/ Pendant Mount Bracket/ Corner Mount Bracket
② Machine Housing
③ Transparent Cover
④ ID Number/ Protocol/ Baud Rate Setting (Please refer to Pg8 and
Pg10).
⑤ Alarm Input or Output / Video Output / Power Input Terminal (Please
refer to Pg12).
Wall Mount
Pendant Mount
Corner Mount

8
6.CameraSetting
DIP Switch setting, shown below:
*Setting 000, then the image display will show: DEVICE N/A.
*Does not affect setup.
Indoor Type Outdoor Type

9
Indoor Type
SW1: ID Number Setting
Connection of up to 127 Speed Dome Cameras, each camera has its own ID
Number.
SW2: Protocol Settings Settings
Switch Number
#1 #2 #3 #4 Protocol
Off Off Off Off NATIVE
On Off Off Off PELCO
Off On Off Off Reserved
On On Off Off Reserved
* Speed Dome automatically detects the type of PELCO Protocol. No
Switch settings are required to set D and P Protocols.
* BOLD: Default Settings.
SW3: Baud Rate Settings Settings
Switch Number
#1 #2 #3 #4 Baud Rate
Off Off Off Off 9600 BPS
On Off Off Off 4800 BPS
Off On Off Off 2400 BPS
On On Off Off 19200 BPS
* BOLD: Default Settings

10
Outdoor Type
SW1: ID Number Setting
Connection of up to 127 Speed Dome Cameras, each camera has its own ID
Number.
SW2: Baud Rate Settings
Settings
Switch Number
#1 #2 #3 #4 Baud Rate
Off Off Off Off 9600 BPS
On Off Off Off 4800 BPS
Off On Off Off 2400 BPS
On On Off Off 19200 BPS
* BOLD: Default Settings
SW2: Protocol Settings Settings
Switch Number
#5 #6 #7 #8 Protocol
Off Off Off Off NATIVE
On Off Off Off PELCO
Off On Off Off Reserved
On On Off Off Reserved
* Speed Dome automatically detects the type of PELCO Protocol. No switch
settings are required to set D and P Protocols.
* BOLD: Default Settings.

11
Indoor Type
Terminal base Connection, Data Line, and Signal Line Regulation
1. Power Input Terminal - DC 12V Input and power consumption of 1.1A.
2. Video Output Terminal - Video Signal Output: CVBS 1. 0Vp-p 75ΩBNC.
3. The Speed Dome Camera is equipped with 6 external alarm triggering
input and 2 sets of alarm output (1 set NO and 1 set NC).
Alarm Input Voltage at 5.6Vmax and Alarm Output Specification: 0.5A
AC120V/ 1A AC24V.
4. RS-485 Communication Control Input and Output connector
RS-485 Input Terminal has two terminal points (D+, D-), using the
twisted pair wire to connect onto the next Speed Dome Camera.
5. RJ-11 Input / Output Connector Control
The function is similar to RS-485 Communication Control Input and
Output connector. Using RJ-11 connector to interconnect.

12
Outdoor Type
Terminal base Connection, Data Line, and Signal Line Regulation.
1. Power Input Terminal
DC 12V Input and power consumption of 2.5A.
AC 24V Input and power consumption of 2.2A.
Video Output Terminal
Video Signal Output: CVBS 1.0 Vp-p 75ΩBNC.
2. Alarm Input/ Output Terminal
Each Speed Dome camera is equipped with 6 external alarm inputs and 2
sets of alarm outputs (1 set NO and 1 set NC). Alarm Input voltage:
5.6Vmax and Alarm Output Specification: 0.35A 120VAC/ 0.5A 24VAC.
3. Communication Control Input/ Output Terminal
RS-485 Input Terminal has two terminal points (D+, D-), using the
twisted pair wire to connect onto the next Speed Dome Camera.

13
7.Installation
Indoor Type
Installation Structure Diagram (In-Ceiling and Flush Mounting)
In-Ceiling Mount Flush Mount

14
Outdoor Type

15
8. System Assembly
Simple to install, the system supports connection of numerous devices (Ex.:
Speed Dome Camera, P/T/Z Receiver, and etc.)
Connect the double twisted cable from the keyboard to the RS-485 terminal,
and video signal to the monitor, DVR or multiplexer to complete the main
system connection.
Control keyboard can connect up to 32 sub-systems to form one control
system. Using the main control keyboard, each system can be controlled
separately.
System Connection Illustration Diagram
The system supports connections of numerous Speed Dome Cameras or
P/T/Z Receivers, assigning a set of ID (Note! ID numbers ranges from
1~127 and may not be repeated) to setup and control, through control
keyboard.
►Connecting the Device
Connect terminal D+ of the RS-485 from the control keyboard to
terminal D+ of RS-485 DATA IN connector from the device; then connect
terminal D- of the RS-485 from the keyboard (the same set of terminal)
to the terminal D- of RS-485 DATA IN connector from the device.
Connecting more than Two Devices
Connect terminal D+ of the RS-485 DATA OUT connector from the
previous device to the terminal D+ of the RS-485 DATA IN connector
from the next device; then connect terminal D- of the previous device
(the same set of terminal) to the terminal D- of RS-485 DATA IN of the
next device.
►Connecting the Keyboard
Connect terminal D+ of the RS-485 from one keyboard connection port
to terminal D+ of RS-485 from the other keyboard connection port; then
connect terminal D- of the RS-485 from the keyboard connection port
(the same set of terminal) to the terminal D- of RS-485 from the other
keyboard.

16
9.Operation
Select and switch Outdoor Speed Dome Camera
CAMERA and SWITCH DEVICE
Use numeric key + CAM key
Enter the desired number n camera and press CAM key, the speed dome
selected by the user to control will appear on the LCD display:
⎥
⎦
⎤
⎢
⎣
⎡_:001DEVICE .
CAMERA OPERATION and ZOOM CONTROL
The joystick may control many different devices: Speed Dome Camera, PTZ
Receiver, and so on. The movement (Up/ Down/ Left/ Right) of the device
depends on the angel of the joystick.
Zoom Wide / Zoom Tele
zPush the joystick clockwise, for close-up image (narrow the angle of
viewing) and release the joystick to stop zooming.
zPush the joystick anti-clockwise, for far away image (widen the angle
of viewing) and release the joystick to stop zooming.
Joystick Control
The movement depends on the angel of the joystick (the more you push
the joystick, the faster the speed):
zPush the joystick up or down, the device will move forward or
backward.
zPush the joystick left or right, the device moves leftward or rightward.
Note! Under zoom mode, the speed movement becomes slow.

17
FOCUS CONTROL
Press FOCUS FAR : focus far and release the key to stop focusing.
Press FOCUS NEAR : focus near and release the key to stop focusing.
PRESET POINT SETUP
The speed dome camera enables 80 preset points. Preset function is to save
the address information (such as PTZ pan/tilt, focus and etc) to the memory
so that you can quickly adjust the dome and PTZ to the correct position,
and when necessary to view life monitoring.
Setup Steps:
①Select the desired speed dome camera.
②Use the joystick (on the control keyboard) and move the speed dome
camera to the desired preset point.
③Use the zoom control to adjust the monitoring display.
④Enter preset number (1~32, 35~82), and press SET PRESET key, the
LCD will display ⎥
⎦
⎤
⎢
⎣
⎡
?XXX
PRESETTOSAVE .
⑤Press SET PRESET key, to enable storage and press CLEAR key to
disable storage.
⑥Repeat the steps 2~5 again, to setup more preset points.
CALL PRESET POINT
Enter the assigned preset number and press GO PRESET key, the LCD
will display: ⎥
⎦
⎤
⎢
⎣
⎡XXX:PRESETGO , and the speed dome camera will move
to that specified preset point.
Example: 1st preset point = 1 + GO PRESET
28th preset point = 2 8 + GO PRESET
CHANGE PRESET POINT
To change the preset point, please follow the setup guide in the “PRESET POINT
SETUP”.
PATTERN RUN
This function is designed to scan the preset points in order. Each group is
allowed to set up 32 preset points for moving speed and retention time. The
Auto Pan has a total of 6 setting groups, but only 4 are programmable. Group
from 1~4 is allowed to set up to 32 preset points and Group 5~6 are not
programmable by user (3 preset points).
The 5th and 6th group is fixed (not programmable)
* The 5th group functions as a simple continuous rotational manner; included
are 1st, 2nd, and 3rd preset points.
* The 6th group functions as a simple continuous rotational manner; included
are 4th, 5th, and 6th preset points.

18
Setup Steps:
①Select a desired group number (1~4 groups).
②Use the joystick on the control keyboard and select the desired preset
point (INDEX: 1~32).
③Use the joystick on the control keyboard and change to the desired
position. If you do not wish to set all 32 preset points, set “” as the last
preset point position (POSITION: 1~33, 35~82 or ).
④Use the joystick on the control keyboard and change to the desired
speed level (SPEED: 1~15).
⑤Use the joystick on the control keyboard and change to the desired
retention time (DWELL TIME: 1~128 sec).
⑥Repeat the steps 2~5 again, to setup more group preset points.
⑦Press [CLOSE] button to exit Auto Pan Setup.
⑧To activate a previously programmed Group Preset Function, press
[GROUP No.] + [PATTERN] button.
Tip:
1. You can select from 1-32 setting points (INDEX) and decide the pan
direction (POSITION), the pan speed (SPEED), and also the dwell time
(DWELL TIME) for each group.
2. Group number buttons in combination with PATTERN button, is used to
activate a previously programmed Group Preset Function.
3. If you do not wish to set all 32 preset points, set “” as the last preset
point.
EXAMPLE：If you wish to set only 4 preset points, you must set the 5th
preset point to “”. The system will auto pan as
follow：
(1,2,3,4) , (1,2,3,4)…
Start Pattern Run
Under control mode (assume device=1), when the LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡_:001DEVICE , enter the desired group number to be setup (Assume
group=1, then enter 1), then press PATTERN key, to activate pattern run mode
in group number 1.
* Preset point group number may differ depending on the speed dome camera type.
Stop Pattern Run
Push Joystick to any direction.
AUTOPAN SETUP
GROUP 001
INDEX 001
POSITION 12
SPEED 10
DWELL TIME (sec) 12
Range: 1~4
Range: 1~32
Range: 80(1~33, 35~82) or 
Range: 1~15 (higher the value, faster the speed)
Range: 1~128

19
AUTO SCAN
Activate Auto Scan
Under control mode (assume device=1), when the LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡_:001DEVICE , enter 9 9 + G0 PRESET key, the speed
dome camera will slowly precede 360°auto scan.
DeactivateAuto Scan
Enter 9 6 + GO PRESET key, or push the joystick to stop auto
scan.
CAMERA FUNCTION SETUP
Enter Camera Setup Menu
Under control mode (assume device=1), when the LCD displays:
⎥
⎦
⎤
⎢
⎣
⎡_:001DEVICE , enter F2 or 9 5 + SET PRESET
key, to enter camera setup menu..