4xem WPT User manual

WPT IP Network Camera
BUSINESS
USE
The WPT is the ideal network camera for demanding applications that
require connection to external alarms and pan/tilt functionality for
surveillance of areas that are larger than the viewing span of one
stationary IP camera. The built-in microphone PLUS the external
microphone connection will allow you to extend the audio range for
large areas. You can also connect the camera to a TV or VCR in addition
to the network connection.
For added piece of mind, you can monitor and control up to 16 IP
cameras with the software provided. See what your cameras see -
from any web browser, anywhere. In addition the motion detection
feature can trigger still image capture and send the image to you via
email or to an FTP location allowing you to know what’s going on no
matter where you are.
sku IPCAMWPT
Also available in wireless -
sku IPCAMWLPTG
Need more information?
www.4XEM.com 1-866-999-4936
FEATURES
•Compact TCP/IP network remote video/audio
surveillance system
•High performance and fully configurable MPEG4
compression engine
•Built-in web server
•1 input and 1 output for connecting external
devices such as alarms, door sensors and relays
to activate light or close doors, or activation of
camera recording
•Pre/post alarm snapshots with buffering to allow
recording two minutes prior to motion detection
•Optimal synchronization of audio and video
•Adjustable image size, quality and bit-rate
•Bundled with free recording and monitoring PC
software
•Built-in intelligent motion detection
•Customizable homepage
•Direct control of digital output
•Audio capability with built-in or external
microphone
•Motorized pan and tilt capability
•Auto pan and auto patrol among selected preset
locations
•Ceiling or wall mountable with included steel
mounting bracket
Great for the home or business!
AC adaptor
connector
Ethernet connector
(10baseT/100baseT)
External microphone
input terminal
I/O connector
AV output
Rear View
Pan/Tilt
HOME
USE
WIRELESS
AVAILABLE
ZOOM

WPT IP Network Camera
sku IPCAMWPT
Camera Specifications
Pan/Tilt/Zoom
Pan Range ±135°, 10° - 50°/sec
Tilt Range +90° - ¯45°, 7°-25°/sec
Features Auto pan mode, auto patrol
mode
Bundled Software IPNV16 Security and Remote
Monitoring Software
Software Features Remote configuration and
control of up to 16 devices
Fast/slow forward, replay and
pause
Scheduled backup
Event triggered, scheduled, and
manual recording
Instant search with preview
windows
Hard disk quota warning
AVI format export
Software
Dimensions & Weight
Dimensions 105.0mm L x 105.0mm W x
114.0mm H
Weight 395g
Video Source Embedded CCD
Image Sensor 1/4” color CCD
Lens Type Board lens w/4.3mm focal
length, F2.0
CCD Resolution 512(H) x 492(V) NTSC
Min. Illumination 1Lux @ F2.0
Electronic Shutter Speed 1/60 - 1/100,000 sec. NTSC
Auto Electronic Shutter Supported
Auto Gain Control Supported
Auto White Balancing Supported
Auto-Iris Support Built-in
CPU Trimedia PNX1300
RAM 16MB SDRAM
ROM 2MB Flash ROM
Video Specifications
Algorithm Supported MPEG4 (Short Header Mode)
Avg. Compression Ratio 150 - 200
Frames/Second Up to 30/NTSC
Max Video Resolution 704 x 480/NTSC
Resolution NTSC Up to 30 frames/sec at 176x120
Up to 30 frames/sec at 352x240
Up to 10 frames/sec at 704x480
Features Adjustable image size, quality &
bit rate
Time stamp & text overlay
Up to 3 motion detection
windows
4x digital zoom
Upload snapshots (FTP or email)
Protocol TCP/IP, HTTP, SMTP, FTP, Telnet,
NTP, DNS, DDNS, UPnP and
DHCP
Ethernet 10baseT or 100baseT fast
ethernet auto negotiation
Minimum System Requirements
Operating System Microsoft Windows 98SE/ME/2000/XP
Browser Internet Explorer 5.x or higher
Miscellaneous
Audio Frequency 24Kbps, 8Kbps (optional)
Microphone Omni-directional
Frequency 20-20,000Hz
S/N Ratio More than 58dB
General I/O 1 sensor input, 1 relay output
LED Indicators Dual color system status indicator
Power Consumption Near 8.4W
Output 12V DC, 1.5A
Input 100-240V AC, 50/60Hz, 0.4A
Operating Temp. 0-40°C (32-104°F)
Operating Humidity 95% RH
EMI & Safety Certification - CE, FCC
Need more information?
www.4XEM.com 1-866-999-4936