iWantit iUSBTC11 User manual

universal USB travel adapter
iUSBTC11
quick start guide
Thank you for purchasing your
new iWantit universal USB travel
adapter.
We recommend that you spend some
time reading this quick start guide in
order to fully understand all the
operational features it oers.
Read all the safety instructions
carefully before use and keep this
quick start guide for future reference.
GB-1 GB-1
unpacking product overview
Quick Start Guide
(PN. : iUSBTC11-001)
Mains USB Charger
(PN. : MAINSBODY)
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
The following items are included:
If items are missing or damaged, please contact Partmaster(UK only).
Tel: [phone] for assistance.
PUSH
PUSH
USB Socket
British-type Adapter
Slide the British-type
adapter onto the mains
USB charger.
Release Button
To detach the British-type
adapter from the mains
USB charger, press down
the Release button at the
back of the mains USB
charger and slide the
British-type adapter out.
Travel Adapters
Other Travel
Adapters
universal USB travel adapter
iUSBTC11
quickstar t guide
Thank you for purchasing your
newiWantit
universalUSB travel
adapter.
Werecommend that you spend some
timereading this instruction manual
inorder to fully understand all the
operationalfeatures it oers.
Readall the safety instructions
carefullybefore use and keep this
quickstart guide for future reference.
British-type
(PN. : BSPLUG)
USA-type
(PN. : ULPLUG)
Aus-type
(PN. : SAAPLUG)
Euro-type
(PN. : VDEPLUG)
C
M
Y
CM
MY
CY
CMY
K
iUSBTC11_60x60_110815.pdf 1 15/08/2011 4:07 PM

(PN. : iUSBTC11-001)
Visit Partmaster.co.uk today for
the easiest way to buy electrical
spares and accessories. With over
1 million spares and accessories
available we can deliver direct to your door the very next day. Visit
www.partmaster.co.uk or call 0844 800 3456 (UK customers only) Calls
charged at National Rate.
This symbol on the product or in the instructions
means that your electrical and electronic equipment
should be disposed at the end of its life separately from
your household waste. There are separate collection
systems for recycling in the EU.
For more information, please contact the local authority
or your retailer where you purchased the product.
operation specication
DSG Retail Ltd • Maylands Avenue • Hemel Hempstead
Herts • HP2 7TG • England
• For indoor use only.
• Always insert the USB device in the correct direction. Failure to do
so may result in damage to the USB device and this unit.
• Only use with products designed to be powered or charged via a
USB socket.
• Electrical interference and electrostatic discharges may cause the
USB device to malfunction and suer damage, resulting in data loss.
• Keep the charger from any liquid.
• Do not disassemble charger.
• Do not use the charger when it is damaged.
• The adapter is used as a disconnect device.
• The mains socket must be located near the unit and should be easily
accessible.
safety
1. Choose an appropriate travel adapter (British-type, European-type,
American-type or Australian-type) and slide it onto the charger.
2. Connect one end of the USB cable to the USB socket of the charger.
3. Connect the other end of the USB cable to your USB device.
4. Plug the charger into a 100-240V mains socket.
5. Unplug the charger from the mains socket when not in use.
6. To detach the travel adapter from the charger, press down the
Release button at the back of the charger and slide the input plug
out.
PUSH
PUSH
mains
socket
Input Voltage: 100-240V ~ 50/60Hz
Output Voltage / Current: Output: DC 5V 2.1A
C
M
Y
CM
MY
CY
CMY
K
iUSBTC11_60x60_110815.pdf 2 15/08/2011 4:07 PM