J-TECH Commander Echo User manual

©2022 JTECH Medical MN042_M
®
This guide is designed to help you operate your Commander Echo
Console in a few easy steps.
Prior to testing, it is crucial you follow the steps in this
guide, or refer to the more comprehensive Commander
Echo User Manual at
http://manuals.jtechmedical.com#Downloader
Quick Start Guide
®

©2022 JTECH Medical MN042_M
Using the Control Stick
• Press the Control Stick to turn on the Console and to make selections.
• Move to the right and left to cycle through test settings in the Settings Menu, to move through
the reps during a Test and to view more detailed side information in the Review section.
• Move up and down to cycle through the menus, and to move between tests in the Review
section.
• Hold the Control Stick to the left to return to the Main Menu (Note: this does not work in certain
menus. Select Exit on these occasions).
• Hold the Control Stick to power-o the Console.
Charging/
Communications
Port
LED Lights
LCD Screen Speaker
Control Stick

©2022 JTECH Medical MN042_M
Charge the Commander Echo Console
and Devices
Using the provided power supply and connectors, charge the console and
devices.
Note: The Commander Echo and its devices are not designed to be used while
charging. Allow the devices to fully charge, then remove them from the charger
prior to use. Refer to the Commander Echo User manual for more detailed
information.
1
2Adjust Test Settings
Commander Echo test settings (e.g. number of reps, unit of measure, etc.) can
be adjusted to your preferred values.
1) Power on the console by pressing the control stick
2) From the main menu, scroll to Settings and press control stick
3) Adjust desired settings
4) Select Exit and press control stick to return to main menu

©2022 JTECH Medical MN042_M
Select Device
Commander Echo allows multiple devices to be paired with a single console
for dierent types of tests. Devices are pre-registered on the console, but
additional devices or missing devices may be added.
1) From the main menu, scroll to Test and press control stick
2) Highlight the device for testing
3) Press the “On” button on the device
4) Press the control stick
5) If using dual inclinometry, repeat steps to enable second inclinometer
If communication cannot be established immediately, check that no other
sources of interference are nearby and try again.
3
4Zero Calibrate
The Commander Echo Console will prompt you to perform a Zero Calibration
if required.
1) Ensure device is in a neutral position (e.g. no weight applied or arms closed)
2) Press the control stick

©2022 JTECH Medical MN042_M
Perform Test
Once zero calibration is complete, the test will start. Once all tests have been
completed, move the control stick left to return to the Main Menu.
5
6Reviewing Test Results
1) From the Main Menu, scroll to Review and press the control stick
2) Move the control stick up or down to cycle through tests, press control stick
to select test
3) Once a test has been selected to review, move the control stick left or right
to view additional data
4) Hold down the control stick to delete individual tests
5) Move the control stick left and hold to return to main menu

©2022 JTECH Medical MN042_M
8Using the Downloader Software
1) Connect the Commander Echo Console to your computer using the
provided USB cable
2) Open the Commander Echo Downloader software
3) Click the “Load Tests” button
4) Choose Report Fields to include in the report and change colors if desired
5) Click “Save Report”
6) Name the report and then click “Save”
7Installing Optional Software
1) Insert the JTECH Medical Commander Echo Downloader Software USB drive
into one of your computer’s available USB ports. If the folder for the USB
does not open automatically, locate the USB drive and open the folder.
2) Browse the les and double-click on the “DownloaderSetup.exe”le to
launch installer. If you are prompted to install Microsoft Visual C++ 2008 SP1
Redistributable Package (x86), click the “Install” button. If you are prompted
by User Account Controls, select the “Allow” option.
3) Follow the on-screen instructions to complete the Commander Echo
Downloader installation.

©2022 JTECH Medical MN042_M
9Additional Information and Support
For additional details concerning the operation of your Commander Echo
Console, devices, or the Downloader software, please refer to the User Manual
at http://manuals.jtechmedical.com.
If you have any questions, concerns, or are interested in purchasing the full
version of the Commander Echo Downloader Software,
please contact JTECH Medical Customer Service by:
Phone: [phone]
Email: [email protected]
Chat online: chat.jtechmedical.com

©2022 JTECH Medical MN042_M
Software Return Policy
- No software returns will be allowed after the seal on the package is broken.
- No cash refunds will be issued.
A Return Material Authorization (RMA) number must be obtained from JTECH
Customer Service prior to returning any merchandise. JTECH reserves the right to
refuse or to return-collect any merchandise sent back without prior authorization of
our Customer Service department. Authorized returns must be shipped pre-paid.
When returning merchandise, please include a copy of your original invoice or packing
slip to ensure prompt issuing of credit.

©2022 JTECH Medical MN042_M
Important Information
The enclosed software is licensed by JTECH Medical on the condition that you accept the terms
and agreement and return policy. Please read the license agreement and return policy carefully
before opening this package, as breaking the seal indicates your acceptance of the terms unless you
received this for a 30 day trial. If you do not accept the license agreement or return policy, please
contact JTECH Medical immediately.
Commander Echo Downloader Software License
JTECH grants the customer rights to use this software on a single computer at a single location
as long as the customer complies with the terms of this license. The trial version of the software
is good for 30 days. Upon expiration of the trial, a software license will need to be purchased to
continue to access the software. If the customer uses this software simultaneously on more than
one computer, the customer agrees to pay license fees for each additional user copy. JTECH reserves
the right to terminate this license if the customer violates any of its provisions. In the event of
termination of purchase, the customer agrees to return the software to JTECH. The software is the
sole and exclusive property of JTECH. The customer agrees to make no more than two copies of
the purchased software for archival purposes. Installing the software from the USB drive further
constitutes agreement with the terms of this license agreement by the customer.
The customer agrees to take all reasonable steps and exercise diligence in protecting the software
from all unauthorized reproduction, publication, disclosure or distribution. Unauthorized transfer
and/or reproduction of these materials may be a crime subjecting the customer to civil and criminal
prosecution. The customer may not transfer any copy of the software to any other person without
the prior written consent of JTECH. JTECH reserves the right to revoke this license and/or seek other
legal remedies to which it is entitled should these conditions be violated.

©2022 JTECH Medical MN042_M
JTECH Medical Industries, Inc
7633 S Main Bldg D
Midvale, UT 84047
United States of America
[phone]
www.jtechmedical.com
Advena Ltd.
Tower Business Centre, 2nd Floor,
Tower Street, Swatar,
BKR 4013 Malta
2797
®
UK RP
Advena Ltd.
Pure Oces
Plato Close
Warwick CV34 6WE
UK