jablotron AC-100LCD User manual

Quick guide to using the AC-100LCD
display with touch screen unit
AC-100LCD display with touch screen unit
Jablotron AC-100LCD
Living & Control Systems
www.jablotron.com
14
Help function
Technical specifications
Powered from the control unit BUS 12 V DC (9 ... 15 V)
Current consumption 50 mA
Operational temperature range -10°C to +40°C
Complies with EN 50130-4, EN 55022
JABLOTRON ALARMS a.s. hereby declares that the AC-100LCD is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC. The original
of the conformity assessment can be found at www.jablotron.com - Technical Support section.
Note: Although this product does not contain any harmful materials we suggest you return
the product to the dealer or directly to the producer after use.
For more detailed information visit www.jablotron.com.

Screen at startup
1
5
2 3 4
Jablotron AC-116 + AC-100LCD
2 3

Screen layout
3 4
6
10 11
7 9
8

Symbols on the screen legend
3 4
1. The installation location of the control unit is here
2. Indicates if the control unit is in heating or cooling mode
3. Displays the current date
4. Displays the current time
5. Keys to view different startup screens
6. Key to return to the previous page.
Changes are saved automatically
7. Key to return to the startup screen. Changes are saved automatically
8. Displays which menu you are in right now
9. The key opens a help screen for the current page
10. “Information section” displays data that you can change
11. These keys are used to navigate in the selected menu

List of symbols
4 5
The measured temperature
The set temperature
Room temperature
Time programme/mode
Water heater control
High temperature protection
Battery status
Request for heating
Request for heating is blocked
The thermostatic valve is open
The thermostatic valve is closed
Pump in operation
The pump is switched off
The boiler is switched on
The boiler is switched off
Alarm/warning
An overview of all the symbols used can be found at www.jablotron.com
Inds. 12
Inds.
12
Inds. 12
Inds.
12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12
Inds. 12

5 6 7
Request for heating is blocked
The thermostatic valve is open
The thermostatic valve is closed
Pump in operation
The pump is switched off
The boiler is switched on
The boiler is switched off
Alarm/warning
A total of 36 room thermostats and/or magnetic contacts can be connected
to the AC-116 control unit.
Several sensors can be connected to one channel, but the first connected
sensor must be a room thermostat.
If a room thermostat is connected to several channels, it leads to their
interconnection and the channels then function as one. If you then connect
one sensor to one of the interconnected channels, then this sensor
will be connected to all interconnected channels.
Rules for connecting sensors

6 7
Connecting the sensors
Before you start using the system, it is necessary to connect all sensors
to the channel / channels to be controlled.
You will find the connection function as follows:
Startup screen Main menu Sensor management Connect sensors
Press the Help function for more information about each connection option
and the method of sensor connection.

7 8
The management of “Rooms”
You can set all parameters for each room and designate them. You will find the
“Rooms” Menu here:
Startup screen Main menu Rooms
In this way you can check and change the temperature setting of the room
thermostats and activate the time programme. If you want to check/change
more parameters on one or more thermostats, select the desired rooms
and press the key “Edit”.
Press the Help function for more information about the meaning of the individual
parameters.

109
Jablotron AC-116 + AC-100LCD
Creating selection shortcuts to individual rooms
and functions
For faster and easier regular checking and control of temperature and functions
create a shortcut to the values/functions on any of the startup screen pages.
To create a shortcut to any room or function press the blank key on one of the
startup screen pages and keep holding it until the appearance of a small menu.
Select the desired room/function and the value you want to find out in this menu.
To delete the shortcut to one of the rooms or function press the key of the appropri-
ate room/function and keep holding it until the appearance of the small menu.
The given shortcut can be deleted in this menu by pressing the “Recycle Bin” icon.

109 11
Deleting sensors
Find the delete function here to delete any sensor from the control unit:
Startup menu Main menu Sensor management
Delete sensors and channels
Press the Help key for more information about individual options and methods
of deleting sensors.