Jack-Post JPC-809-JE User manual

Model JPC-809-JE
USE AND CARE GUIDE
PORCH SWING
Questions, problems, missing parts?
1-800-800-4950
Mon. through Fri. 8:00am - 8:00pm EST
E-mail [e-mail]
[e-mail]
Please contact 1-800-800-4950 for further assistance.
WARRANTY
GF-ZI-5480

Table of Contents
Do not Return..............................................................3
Use and Care/Wood Care Guide................................4
Instructions..................................................................5
Customer Service Contact Info..................................15
[e-mail]
Please contact 1-800-800-4950 for further assistance.
2

Customer Service
[e-mail]
Please contact 1-800-800-4950 for further assistance.
3
DO NOT RETURN THIS ITEM TO THE STORE
If you experience any difficulty with assembly, missing parts or use, please DO NOT return this
item to the store.
Retail stores are unable to properly assist you.
Contact our Customer Service Department directly for assistance.
Call toll-free 1-800-800-4950, Monday-Friday, between the hours of 8 a.m. and 8 p.m. (EST).
Our friendly Customer Service Agents will be happy to assist you.
.

Use and Care
[e-mail]
Please contact 1-800-800-4950 for further assistance.
4
OIL-BASED PAINTED
WOOD CARE GUIDE
PLEASE READ THIS INFORMATION CAREFULLY - IT WILL HELP YOU TO MAINTAIN YOUR FURNITURE
This furniture has been made from seasoned wood and has already been factory primed and finished with an oil-based
paint. With proper maintenance, it will give you years of enjoyable service. Wood is a natural material and its appearance
will change when exposed to the elements; surface splits and checking may appear, particularly on the end grain and to a
lesser extent on the surface within a few weeks if left exposed to the elements. The furniture is designed with this in mind to
remain strong and durable. If left exposed to the weather, your furniture will fade in color. The exact color will depend on the
environment; for example, less fading will occur if the furniture is placed in a shady location under a tree. To help preserve
the color, cover the furniture with a garden furniture cover when not in use. Wood expands and contracts with changes in
relative humidity. To prevent over drying and excessive cracking, do not store in a heated place.
CARE AND MAINTENANCE
1. We recommend cleaning the surface of dirt, bird droppings, tree sap, grease. etc. Scrub with a cloth or soft brush
using a mild household cleaner, dish or laundry detergent.
2. Rinse thoroughly.
3. Allow to dry completely and retighten all hardware.
REFINSHING
Based on exposure to the elements the finish may need to be restored. Proceed as follows:
1. Cover the floor area with a suitable liquid resistant ground sheet to contain dust, dirt or spills.
2. Use suitable protective clothing, i.e., rubber gloves, apron, safety glasses, dust mask, etc.
3. Check and retighten all furniture hardware
4. Remove any finish that has become loose or cracked by using a scraper or wire brush. DO NOT USE STEEL WOOL
as the fine particles may result in dark rusty blotching.
5. In a well-ventilated area or outdoors, lightly sand using 100-200 grit sand paper.
6. Remove any dust by wiping with a damp cloth.
7. Allow item to dry completely.
8. Use an oil-based primer on any bare wood spots.
9. Brush or spray on new finish using the manufacturer's instructions - using an oil-based paint available at any paint
retailer.
Customer Service Mon - Fri 8:00 am to 8:00 pm Eastern Time
Jack-Post Corp.
800 East Third Street
Buchanan, MI USA 49107
1-800-800-4950
[email protected]

Pre-Assembly
[e-mail]
Please contact 1-800-800-4950 for further assistance.
5
TOOLS REQUIRED
HARDWARE INCLUDED (NOT SHOWN ACTUAL SIZE)
Part Decsription Quantity
1
2
3
4
BOLT M6 x 45 mm 4
4
4
SCREW M4 x 25 mm
EYE BOLT
1 2 3
5
6
7
82
2 SET
HOOK
CHAIN
5 6
78
4
1ALLEN KEY
SCREW M4 x 32 mm 2
2SCREW M4 x 19 mm
FRONT
BACK
TOP
DETAIL CHAIN (8)

Pre-Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
6
PACKAGE CONTENTS
Decsription Quantity
Right leg 1
1
1
2
Left leg
Seat
Panel
Back rest 1

Assembly
[e-mail]
Please contact 1-800-800-4950 for further assistance.
7
1 Attaching the eye bolt
•Lay the right leg insert eye bolt (5) from the outer side. Make sure the opening for the eye bolts (5) should be
facing down.
•Repeat these step with the other side.
5
5
FACING
DOWN

Assembly
[e-mail]
Please contact 1-800-800-4950 for further assistance.
8
2 Attaching the back rest
•Attach the back rest and panel to the right leg and secure with bolt (1)usingAllenkey(6). Do notfully tighten until
step 4. Repeat procedure for the left leg.
61
1

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
9
3 Attaching the seat
•Attach the seat to the assembly, by inserting dowels of seat intothe matchingholes at thepanel.

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
10
4 Attaching the panel
•Attach the panel into assembly, using bolt (1), tighten with Allen key(6). Fully tightenallbolts in thisandthe
previous step.
1
1
6

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
11
5 Attaching the screw
•Attach the screws (2) to fix seat and panels. Attach the screws (3)tofixseatand right leg.Repeatthe procedure
to the left leg. Make sure all hardwareissecurely tightened.
3
3
3
2
2

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
12
6 Attaching the screw
•Attach the screws (4) to fix back rest and right leg. Repeat the procedure to the left leg. Make sure all hardware
is securely tightened.
4
4

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
13
7 Attaching the chain
•Please make sure the eye bolts insert correctly and please ensure the chain on front leg is longer than the back
leg (see the picture detail on page 5). Place each end of chain(8) toeye bolt(5).
8
8

Assembly (continued)
[e-mail]
Please contact 1-800-800-4950 for further assistance.
14
8 Attaching the hook
Note : Ensure the alignment of the set hooks (7) are conducive to the intended swinging motion of the item.
Caution : Incorrect installation of the ceiling hooks can cause the swing to fallandpossiblycause serious injury to
occupants. Be sure to drill the correct sizeholesinto sturdywood beam.
•Hang the chain (8) by open the quick link first then insert to the hook (7). Make surethe quicklink is tightly locked.
7 7
Quick
link
7
Incorrect
Exposed
threads
Correct
No exposed
threads
8
7
8
WARNING: Swing has been tested for use at up to 500 lbs.
Advertencia: Oscilación se puso a prueba para soportar has 500 libras.
Attention: Balançoire a été testéé pour supporter jusqu'à 500 lb.
•Locate a ceiling beam that is sturdy enough to handle the load of the swingand the occupants(approximately
500lbs). Drill 2 vertical 5/32 inch pilot holes in the center of the ceilingbeam,56inches apart. Insert the set hooks
(7) and screw them into the holes until no threads areexposed.

[e-mail]
Please contact 1-800-800-4950 for further assistance.
15
Customer Service
Questions, problems, missing parts?
Please call Customer Service, 1-800-800-4950
For more information about warranty, please visit WWW.JACK-POST.COM / Warranty.
WARRANTY