Jade JadeSpot User manual

1

Jade Wireless
JadeSpot Quick Start Guide



Table Of Contents

Table Of 
Contents………………………………………………………..…………………………………………………………………….….1
Getting started on the JadeSpot Cellular Router……………..……………………………………………………...………2
1. Power on……………………………………………………..…………………………………………………………………….………...2
2. Connect……………………………………………………..…………………………………………………………………….………….2
Connect via Cellular……………………………………………………..…………………………………………………………..3
Connect via LAN……………………………………………………..………………………………………………………………..4
Connect via Wi-Fi……………………………………………………..……………………………………………………………….5
3. Access the Web Admin    
Panel……………………………………………………..……………………………………………..5
1) Admin Password Setting……………………………………………………..………………………………………………..5
2) Admin Panel……………………………………………………..…………………………………………………………………..6
Additional Information……………………………………………………..……………………………………………………………..6







Copyright Jade Wireless Inc. © 

2
Device Details







Copyright Jade Wireless Inc. © 

3
Getting started on the JadeSpot Cellular
Router
1. Power on
For the JadeSpot cellular router with a built-in battery, press the power button to turn on the
device.

You can also plug the Micro USB power cable into the power port of the router to power on the
device. That will also charge the built-in battery.

Make sure you are using a standard 5V/2A power adapter. Otherwise it may cause malfunction.


2. Connect
You can connect to the router via Ethernet cable or Wi-Fi.

Note: This step only connects your devices to the local area network (LAN) of the router. You
cannot access the Internet currently. In order to connect to the Internet, please finish the setup
procedures below and then follow the ‘Internet’ section in our JadeSpot User Manual to set up an
Internet connection.

Copyright Jade Wireless Inc. © 

4
Connect via Cellular
To connect the JadeSpot to a cellular carrier, remove the SIM slot cover. Then insert a micro SIM
card into the SIM slot. The cut edge should be facing out, and the chip side should be facing
upwards from the top of the device. Reference the sticker on the device for more info.


The device will automatically detect the cellular carrier and automatically apply the correct APN.

To manually input an APN, click on Manual Setup


Copyright Jade Wireless Inc. © 

5
In the field corresponding to APN, there will be a dropdown list of previously used APN’s or you
can add an APN manually.

Note: contact your cellular carrier to find out which APN should be use.

Connect via LAN
Connect your device to the LAN port of the router via Ethernet cable.

Copyright Jade Wireless Inc. © 

6
Connect via Wi-Fi
Search for the SSID of the router in your device and input the default password: Jadespot360  .
Note: The SSID was printed on the bottom label of the router with the following formats:
●Jadespot_XXXX

3. Access the Web Admin Panel
Open a web browser (we recommend Chrome, firefox) and visit http://192.168.10.1 You will be
directed to the initial setup of the web Admin Panel.
1) Admin Password Setting
There is no default password for this Admin Panel. You have to set your own password, which
must be at least 5 characters long. Then, click Submit to proceed.

Note: This password is for this web Admin Panel and the embedded Linux system. It will not
change your Wi-Fi password.
Copyright Jade Wireless Inc. © 

7
2) Admin Panel
After the initial setup, you will enter the web Admin Panel of the router. It allows you to check the
status and manage the settings of the router.

Additional Information
For Additional information on router set-up and further navigation of router setting, Please
reference the JadeSpot User Manual.

To connect your JadeSpot device to the JadeHub Remote Access system, please reference the
JadeHub User Manual.


Copyright Jade Wireless Inc. © 