JARDIN WINDSOR LIFETIME DJ104BC User manual

MODEL # DJ104BC- WINDSOR LIFETIME CRIB (DARK PINE)
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Follow warnings on all products in a crib.
WARNING ENTRAPMENT / STRANGULATION HAZARD:
*Infants have died in toddler beds from entrapment and strangulation.
*
NEVER use bed with children under 15 months.
*NEVER place bed near windows where cords from blinds or drapes may strangle a child.
*
*
*
*
*
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model number, color and a
detailed description of the part.
Before each usage or assembly, inspect crib for damaged hardware, loose joints, missing parts or sharp edges,
DO NOT use crib if any parts are missing or broken. Ask your dealer or write to our customer service
representative (address & phone number shown above) for replacement parts and instructional literature if
needed. DO NOT substitute parts.
Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under
an infant.
When child is able to climb out or reaches the height of 35 inches (90 cm), the crib shall no longer be used.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless
otherwise advised by your physician.
E-MAIL: [email protected]
WARNING
Failure to follow these warnings and assembly instructions could result in serious injury or death.
Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.
When child is able to pull to standing position, set mattress to lowest position and remove bumper pads, large
toys and other objects that could serve as steps for climbing out.
Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
DO NOT use a water mattress with this crib.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
Strings can cause strangulation! DO NOT place crib with a string around a child's neck, such as hood strings
or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose
fasteners.
If refinishing, use a non-toxic finish specified for children's products.
DO NOT place DAY BED or TODDLER BED near windows where cords from blinds or drapes may strangle a
child.
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier cords.
DO NOT suspend strings over a TODDLER BED or DAY BED for any reason.
CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES
(69CM BY 131CM) WITH A MINIMUM THICKNESS OF 4 INCHES (10CM) BUT NOT EXCEEDING 6 INCHES
(15CM).
Infants can suffocate in gaps between crib sides and a mattress that is too small.
The TODDLER BED or DAY BED is not intended for children under 15 months of age or over 50 pounds
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to avoid the
formation of a gap between the mattress and the bed that could cause an entrapment (when product is used as
a TODDLER BED or DAY BED).

MODEL # DJ104BC- WINDSOR LIFETIME CRIB (DARK PINE)
*
*
*
*
*
*
NOTES
CAUTION: Adult assembly required.
Assembly will require two people.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CARE AND CLEANING
Ensure all parts and components are present before beginning assembly.
Assemble on soft, smooth surface to prevent damage to product finish.
Phillips head screw driver is not included.
DO NOT use power tools.
LIMITED WARRANTY
Jardine Enterprise warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This warranty is
valid only upon presentation of proof of purchase. This is solely limited to the repair or replacement of
defective furniture components and no assembly labor is included. This warranty does not apply to any
product which has been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have other rights which
vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to
clean surface. Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to
sunlight and extreme changes in temperature and moisture can damage wood furniture.
If the crib is to be stored, store in cool dry place and carefully package all original hardware to protect from
loss.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.

HARDWARE AND PART LIST
A B
C
F H
G
J
I
K
ASSEMBLY INSTRUCTION FOR "DJ104BC"CRIB
BOLT 3 3/4"×1/4"DIA 8PCS
HEAD BOARD 1PC
FRONT PANEL 1PC
GUARD RAIL 1PC
END PANEL
BOLT 2 3/4"×1/4"DIA 8PCS
ALLEN WRENCH 4MM 1PC
D
BOLT 1/2"×1/4"DIA 16PCS
LEFT (H1)
1PC
RIGHT (H2)
1PC
FRONT POST
LEFT END
(G1) 1PC
RIGHT END
(G2) 1PC
MATTRESS SUPPORT 1PC

ASSEMBLY INSTURCTIONS
DJ104BC 4 IN 1 CRIB
Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts, which may have come loose inside the carton during shipment. Identify and
count all parts and compare with the parts list above.
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT. THEN LOOSEN
1/2-3/4 OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH
SCREW AND TIGHTEN. USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
STEP 2.
TO ATTACH THE RIGHT END PANEL
ASSEMBLY (PARTS G2 & H2) ONTO
THE HEADBOARD (PART I),
USE 2 BOLTS (PART B) AND WRENCH
(PART C) PROVIDED TO SECURE THE
RIGHT END PANEL ASSEMBLY
(PARTS G2 &H2) TO THE HEAD-
BOARD (PART I). REPEAT THIS STEP
TO ASSEMBLE THE LEFT END PANEL
ASSEMBLY (PARTS G1 & H1) AND
HEADBOARD (PART I).
C
B
H1
H2
B
I
B
B
STEP 1:
TO ATTACH THE RIGHT FRONT POST
(PART H2) TO THE RIGHT END
PANEL (PART G2) ,USE 2
BOLTS (PART B) AND WRENCH
(PART C) PROVIDED TO SECURE THE
RIGHT END PANEL (PART G2) AND RIGHT
FRONT POST (PART H2). REPEAT THIS
STEP FOR THE LEFT FRONT POST
(PART H1) AND LEFT END PANEL (PART G1).
PLEASE MAKE SURE THAT THE TOP OF THE
POST IS AT THE LOWEST POSITION TO BE
CONNECTED TO THE TOP OF THE RA1L OF
THE END PANEL WHILE SCREWING
B
G1
G2
G1
G2
C
H1
H2
I

STEP 3:
DJ104BC 4 IN 1 CRIB
ASSEMBLY INSTURCTIONS
Attach the mattress support to the 4 corner posts with the mattress support bolts (D). Use
Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the
mattress support.
INCORRECT-
Tabs on corners
of mattress
support should
point up
INCORRECT-
Raised edge
should face
down -this
photo shows
mattress
support is
upside down
CORRECT
*Tabs to point UP.
*Flat surface of mattress support to face up
- mattress must sit on flat surface.
G
G
G
N

STEP 4.
ATTACH THE FRONT PANEL (PART J)
TO FRONT POST (H1) AND (H2) USING
BOLTS (A).USE ALLEN WRENCH (C)
PROVIDED TO TIGHTEN BOLTS.
DJ104BC 4 IN 1 CRIB
ASSEMBLY INSTRUCTIONS
C
A
A
H1
J
A
H2
A

WARNINGS:
1. ANY MATTRESS USED IN THIS DAY BED MUST BE AT LEAST
27-1/4" × 51-5/8" (69CM × 131CM) WITH A MINIMUM THICKNESS OF 4"
AND NOT EXCEEDING 6" (15CM).
2. THE DAY BED IS INTENDED FOR USE BY A CHILD NOT LESS THAN 15 MONTHS
OF AGE AND WHO WEIGHTS NO MORE THAN 50LBS (27.7KGS)
NOTE: WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT, THEN LOOSEN
1/2-3/4 OF A TURN, AFTER CRIB IS COMPLETELY ASSEMBLED, RETURN TO EACH
SCREW AND TIGHTEN, USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
DAY BED ASSEMBLY INSTRUCTIONS, STARTING FROM CRIB
STEP 1: DETACH THE FRONT PANEL (PART J) FROM THE FRONT POSTS (H1) AND (H2)
USING ALLEN WRENCH (C).
STEP 2: IF MATTRESS SUPPORT (PART K) IS NOT IN THE LOWEST POSITION,UNSCREW
MATTRESS SUPPORT BOLTS (PART D) FROM POST AND MOVE IT TO THE LOWEST
POSITION.
NOTE: PLEASE ENSURE THAT THE HEIGHT ADJUSTMENT HOLES BE FILLED
WITH SCREWS (D) AFTER THE MATTRESS SUPPORT HAS BEEN MOVED TO THE
LOWEST LEVEL, MAKE SURE THAT THESE SCREWS ARE TIGHTLY SECURED.
STEP 3: USING THE WRENCH (PART C) PROVIDED, ATTACH THE GUARD RAIL (PART F)
USING 4 BOLTS (PART A) BETWEEN THE LEFT AND RIGHT FRONT POSTS.
STEP 4: TIGHTEN ALL SCREWS CLOCKWISE.
STARTING FROM SCRATCH:
STEP 1: FOLLOW STEPS 1 TO 3 OF THE CRIB ASSEMBLY INSTRUCTIONS.
STEP 2: FOLLOW STEPS 2 TO 4 FOR THE DAY BED ASSEMBLY INSTRUCTIONS LOCATED
ABOVE (STARTING FROM CRIB).
DJ104BC DAY BED
ASSEMBLY INSTRUCTION
A
C
F

FULL SIZE CONVERSION RAILS ARE NOT INCLUDED. DIAGRAM 2
IS FOR REFERENCE ONLY.
STEP 1: ASSEMBLE THE FRONT POSTS (PART H1 & H2) TO THE FRONT PANEL
(PART J) BY USING BOLTS (PART A), AS SHOWN IN DIAGRAM 1.
STEP 2: ASSEMBLE THE FULL SIZE CONVERSION RAILS (NOT INCLUDED) TO THE
HEADBOARD (PART I) AND THE FOOTBOARD ASSEMBLY, AS SHOWN
IN DIAGRAM 2.
ASSEMBLY INSTRUCTION
DJ104BC CRIB FULL SIZE BED
I
I
J
H1
Headboard
Footboard
Headboar
SIDE RAIL
WOOD SCREWS
SLAT
NOTE:
DIAGRAM 1
DIAGRAM 2
A
H2
Footboard
I
DIAGRAM 1
A
J
A
A
A
DIAGRAM 2
HEADBOARD
H1
FOOTBOARD