TROLL nursery SUN BEDSIDE CRIB User manual

IMPORTANT
RETAIN FOR FUTURE REFERENCE
READ CAREFULLY
SUN BEDSIDE CRIB
The illustrations in these instructions are to be used as a guide only
Conforms to BS EN 1130 - 1 : 1997 & 2 : 1996
Made in Latvia

SAFETY INSTRUCTIONS
Your child’s safety is your responsibility.
crib
Furniture can be dangerous if incorrectly installed. Assembly should be carried out by a
competent person.
Keep children clear during assembly as pack contains small parts which may present a
choking hazard.
The crib should be placed on a horizontal floor.
Young children should not be allowed to play in the vicinity of the crib.
All assembly fittings should always be tightened properly and care should be taken that no
screws are loose, because a child could trap parts of the body or clothing (eg. Necklaces,
strings, ribbons for dummies etc) which would pose a risk of strangulation.
WARNING: When your child is left unsupervised in the crib, it should be locked in fixed position.
crib
rib
Do not use more than one mattress.
rib
rib 2 .
: 38 89
When your child is able to sit, kneel or to pull itself up, the crib shall not be used anymore
for this child.
Ensure the crib is positioned away from any cords on blinds or curtains to avoid risk of
entanglement.
Remove all parts from packaging and check against the parts list.
Do not discard any packaging until you are sure you have all parts and the pack of fittings.
You will find it easier to assemble the if a second adult is available to help you.
Ensure that the is kept away from strong heat sources such as electrical bar, gas and
open fires.
Do not use if any part is broken or missing.
Do not leave anything (toys etc) in the c which could provide a footrest or present a danger
of suffocation or strangulation.
One end of the c has a mark indicating the height of the mattress.
The thickness of the mattress must not reduce the internal depth from mattress surface to
top of the c side above it to less than 00 mm
The recommended mattress size x cm.
Check regularly to ensure that all the components are secure.
To clean use a damp cloth, avoiding the use of strong detergents or abrasives.

PARTS LIST
FITTINGS LIST
TOOLS REQUIRED

ASSEMBLING
Adjust the wheel
runners so that
the drop side run
smoothly.
Choose one of the height positions.
Mark indicating the
maximum height of
the mattress.