Jenx Monkey User manual

INSTRUCTION FOR USE
Important Information: These instructions must be kept with
the product at all times. This product is a prescribed Medical
Device. To be used only under the guidance of a Therapist
or Prescribing Practitioner. You must read these instructions
carefully before use.
Version 010
Monkey
Max user weight: 25 kg
Weight of product:17.6 kg

INSTRUCTION FOR USE
Monkey
Note: Some fabric and plastic colours may vary,
adjustments are not affected.

Carers and
home users
Re-issue
and stores
Professional and
technical users
Contents
General Information
Safety Labels ......................................................... 7
Basic Safe Configuration ....................................... 8
Care and Cleaning Instructions ............................. 8
Maintenance .......................................................... 9
Product Induction & Hand Over ............................ 10
Specification & Warranty ....................................... 11
Main Features and Benefits................................... 12
Frequent Adjustments
Castors & Safety Straps ........................................ 15
Safety Straps.......................................................... 16
Tray Angle .............................................................. 17
Tray Infill ................................................................. 18
Clinical Adjustments
Upper & Lower Pads.............................................. 20
Thoracic Pads ....................................................... 21
Hip and Lower Pads .............................................. 22
Angle Adjustment................................................... 23
Sandal Adjustments............................................... 24
Sandal Raising Blocks ........................................... 25
Optional Components
Activity Frame & Grab Bar ..................................... 27
Maintenance & Inspection
Maintenance & Inspection ..................................... 29
Frequently Asked Questions.................................. 31
Notes...................................................................... 31

4
General Information
Ensure that your Therapist has confirmed that the product is correctly set up, by signing the ‘Set
Up’ section of the Log book before using this product. If the product has not been set up by your
Therapist DO NOT USE.
Jenx Limited recommends that children are never left unattended whilst using this Medical
Device. Children may slip or fall when unattended and may suffer serious injury. It is the sole
responsibility of the person caring for a child using this Medical Device to ensure the safety of the
child in the Device should they be left alone.
Always read the instructions before operating. Failure to read and follow the Instruction for Use,
especially with regard to moving parts, may pose a risk to the user.
Do not use this product if you suspect or know that it is broken or faulty. Please contact Jenx
Limited immediately for advice: Jenx Limited, Tel: [phone].
This product contains small parts which could present a choking hazard to small children.
All Jenx Limited products are tested to meet current Fire Safety regulations. Always keep
products away from; naked flames, cigarettes and sources of heat such as heaters.
Jenx Limited supplies the necessary tools to adjust each product. These tools are supplied for
use by trained therapists only. Store the tools in a safe place and keep away from children.
Assemble product fully before use. Please contact Jenx Limited if you have any problems at this
stage. Jenx Limited, Tel: [phone].
Ensure that good care is taken of your product: clean regularly. Do not use abrasive cleaners.
When not in use, store this product in a dry place that is not subject to extreme temperatures.
Places not to store this product include garages, attics or garden sheds.
Any changes or alterations carried out by persons other than a Jenx authorised service person
will invalidate the warranty and Jenx can accept no liability for any injury or damage so caused.
All Jenx products are Medical Devices and are sold on the understanding that they will be
prescribed, issued and maintained in line with current national device management guidelines.
This product must be thoroughly inspected by a qualified person at least annually
This product conforms to the European Medical Devices Directive. It has not been tested in
conjunction with other manufacturer’s products. Do not add any accessories other than Jenx
Limited accessories to this product. If in doubt, contact Jenx for advice [phone].
Important Safety Info
All belts and harnesses should be used at all times. For therapy purposes it may be necessary
to deviate from this rule and any deviation should be fully documented as part of a Risk
Assessment or Therapy Program and all relevant staff and carers appropriately trained. Secure
client with straps before adjusting product. Ensure finger’s width between safety strap and client
to prevent over tightening or client moving to inappropriate position. Adjust straps for each client
and changes of clothing. Minimum Velcro® overlap: 3 inches (7.5cm) on all straps. If strap is not
long enough: DO NOT USE PRODUCT.

5
Monkey
jenx.com
Wing knob Allen key bolt Swiss clip
Wing nut Star knob
Key for Users
T-Nut
Plastic spacer Plastic washer
Key to Components
Carers and
home users
Re-issue
and stores
Professional and
technical users
Key
Scallop wheel

Carers and
home users
Re-issue
and stores
Professional and
technical users
General
Information
CHAPTER ONE

7
General Information
Serial Number/ CE Certification
Conforms to CE Marking
Regulations
Medical Devices Directive
(MDD) 93/42 EEC)
Each Jenx product has a number of pictorial safety labels attached, these refer to the explanations below.
Product Labels
Client weight Limit (chang-
es per model and size)
The serial number is written on
the CE label (see picture), which
is located on the product. Please
quote this number on all cor-
respondence.
Attention/ Warning
Please read Instruction for use
Only for indoor use
Always fasten and adjust positioning straps and belts to suit the child.
Adjust to suit changes in clothing. Allow one fingers width between
the belt and the child
Do not leave child unattended (see page 4 for full warning)
DO NOT USE as a mobility device
Never use product on rough ground or uneven surface
Safety Labels

8
General Information
Wooden Products and Parts
• For deep cleaning a low pressure steam cleaner can be used
• Do not use organic solvents to clean Jenx Products
• Soap and water or antibacterial spray can be used
• Check for breaks or splintering of the wood before re-issuing
• Daily cleaning: Spray polish or wax polish can be used
Metal Frames and Coated Parts
• For deep cleaning a low pressure steam cleaner can be used
• Do not use organic solvents to clean Jenx products
• Soap and water or antibacterial spray can be used
• Daily cleaning: Wipe framework down with a damp cloth as necessary
Fabrics, Vinyl and PU (polyurethane)
• Minor spills can be removed with a damp cloth
• Spillages should be removed as quickly as possible after contact, dab the stain, do not rub
• Do not over wet the stain
• Do not use organic solvents, dry cleaning fluids, abrasive cleaners or industrial bleaches
• Antibacterial spray or wipes can be used
• Always ensure that the product is dry before use
Basic Safe Configuration
Care and Cleaning Instructions
The following features must be kept on the Stander
at all times: Footplate, Chest, Hip, Lower and Upper
Pads, Chest and Hip Straps, Kneecups. Failure to use
these basic features may pose a risk to the user. Other
accessories can be added but these basic features
must always be used.

9
Monkey
jenx.com
This product must be thoroughly inspected by a qualified person at least annually
Daily Checks
Daily checks of the equipment should be carried out by carers. These checks are not technical but a basic un-
derstanding of the product is needed. Multiple daily checks may be needed in schools or therapy rooms where
the products are used by multiple users. The checks should include the following points:
• Check that all nuts and bolts are in place and secured
• Check that all mechanical movements operate fully
• Check the structure of the product for signs of fatigue
• Castors: Lift base and check each wheel to ensure it is not loose or worn. Remove any grease or dirt that
has built up on the wheels, check that the brake stops the wheels rotating (where applicable)
• Check gas springs for normal operation and resistance. Slow descent (creeping) of the gas spring can be
checked by observing the position of the unit over a period of time
• Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx
Limited to arrange replacement
If you have filled your product inspection log book, copies can be printed from www.jenx.com
We recommend that on a monthly basis a competent person who is familiar with this piece of equipment and
who has been trained in its use should carry out a more detailed check:
Monthly Checks
• Replace any lost or worn washers or bolts
• Check tray for damage. Ensure that the tray edging is secure and that the tray is clean and free of any
rough or sharp corners
• Check all upholstery for any signs of wear and tear
• Brush Velcro® to remove fluff
• Check wooden parts for splitting or splintering
• Check straps for fraying and missing or broken buckles
• Clean any stains or spillages
• Contact Jenx Limited if any accessories not manufactured by Jenx Limited have been attached to the
product. Unauthorised accessories may affect the safety of this product and invalidate your warranty
• Check that gas spring levers are not bent. Do not use the product if any levers are bent. Contact Jenx
Limited to arrange replacement
Maintenance

10
General Information
This product is a Prescribed Medical Device and as such it is important that all users understand the use
and adjustments that this product offers. This booklet shows the range of adjustments and gives guidelines
for each type of user to follow.
Professional/Technical users
This refers to the Therapist and Prescribing Practitioner.
Ensure you read all sections in this booklet and are fully familiar with all the adjustments. As well as the selec-
tion, prescription and set up of the product to suit the client’s needs, the technical user has the responsibility
for the induction of the Carer, ensuring that the Carer:
• Has an understanding of the safety aspects of the product
• Is familiar with the product. What to use and what not to use
• Knows which accessories have been added and what daily adjustments to make
• Has an understanding of the care and cleaning procedures
A formal hand over procedure should be adopted for this product. Use the separate Inspection Log to record
set ups and changes to the product. Jenx Limited offers Product Courses for Technical Users. Please con-
tact us for more information.
Carer (This section refers to the daily carer)
This product is a Prescribed Medical Device. It should only be used with the guidance of a prescribing pro-
fessional. Do not make any adjustments other than those you have been instructed to make.
The Carer section of this guide gives the adjustments needed to aid daily use only, any other adjustments
are only to be performed by the Therapist.
Re-Issue (This section refers to Stores Personnel)
Stores personnel must follow the checks and maintenance guide before re-issue. The Medicines and
Healthcare products Regulatory Agency (MHRA) releases regular bulletins regarding product updates and
issues. These should be monitored.
• Records should be kept on all products serviced or re-issued
• Repairs or replaced parts should be traceable
• The Jenx serial number should always stay with the product and never be removed
• Instructions should always be issued with the product. Copies are available from Jenx Limited or can
be downloaded from www.jenx.com
• Always inform the technical user before a product is issued to a home for set-up purposes
• If the product is to be re delivered, ensure adequate and secure packaging is used
• If in any doubt as to the safety of this product do not issue it, contact Jenx Limited for advice
• Products must only be issued fully assembled, clean and in good working order. Instruction for Use
must be with the product
Jenx Limited offer Technical User Courses for stores personnel. The course gives guidance for: maintenance,
inspection of the products, regulatory information, cleaning. Please contact us for more information.
Product Induction
& Hand Over

11
Monkey
jenx.com
Warranty
The Instruction for Use of this product should be followed carefully. It is impossible to eliminate all risks
inherently associated with the use of this product. Product failure or other unintended consequences may
result because of such factors as improper storage, use or maintenance, unauthorised and inappropriate
alteration or repair or improper or violent treatment, excessive strain, use of improper replacement parts, or
because of normal wear and tear, all of which are beyond the control of the Manufacturer and Seller. Buyer
and User assume all such risks.
Manufacturer and Seller warrant that this product will be free from defects in material and workmanship for a
period of 24 months from the date of purchase and is reasonably fit for the purposes stated in the Instruction
for Use, subject to the inherent risks under normal use conditions. This Warranty does not extend to the
use of the product contrary to the Instruction for Use, or under abnormal conditions, or under conditions not
reasonably foreseeable to or beyond the control of the Manufacturer or Seller. Buyer and User assume the
risk of any such use. MANUFACTURER MAKES NO WARRANTIES OF SATISFACTORY QUALITY OR OF
FITNESS FOR A PARTICULAR PURPOSE NOR ANY OTHER EXPRESS OR IMPLIED WARRANTY EXCEPT
AS STATED ABOVE.
In no event shall Manufacturer or Seller be liable for any incidental, consequential or special damages
resulting from the use of this product. THE EXCLUSIVE REMEDY OF THE USER OR BUYER AND THE
EXCLUSIVE LIABILITY OF MANUFACTURER AND SELLER FOR ANY AND ALL CLAIMS, LOSSES,
INJURIES OR DAMAGES (INCLUDING CLAIMS BASED ON BREACH OF WARRANTY, CONTRACT,
NEGLIGENCE, TORT STRICT LIABILITY OR OTHERWISE) RESULTING FROM THE USE OF THIS
PRODUCT, SHALL BE THE RETURN OF THE PURCHASE PRICE OF THE PRODUCT OR THE
REPLACEMENT OF THE PRODUCT.
Manufacturer and Seller offer this product, and Buyer and User accept it, subject to the foregoing conditions
of sale and limitations of warranty and liability, which may not be modified except by written agreement
signed by a duly authorised representative of the Manufacturer.
Specification & Warranty
Age Range 9 months to 4 years
Max User Weight 25 kg
Min (mm) Max (mm)
Height from Sandals 510 750
Chest Width 150 235
Hip Width 150 235
Hip Pad Height from
Sandals
360 600
Thoracic Pad Height 490 730
Base Footprint 880 x 575
Angle Range 0 º to 70º prone

12
General Information
Main Features and Benefits
pg
00
0
The adjustment can be found on the
page specified
The priority order in which it is
recommended to adjust the product
Key
4
Hip / Thoracic
Pads
Benefits: Adjusts to
support or brace the
child and helps to
improve symmetry
pg
21
Abduction
Block
pg
22
4
Knee Pads
Benefits: Adjusts to
support or brace the
child and helps to
improve symmetry
pg
22
5
Safety Straps
Benefits: Holds the
user securely in
place during use
pg
15

13
Monkey
jenx.com
1
Locking
Castors
Benefits: All four
castors lock to en-
sure that the stander
stays stationary.
pg
15
6
Sandals
Benefits: Ensure the
users feet are held
firmly in position
pg
24
Angle
Adjustment
Benefits: Can ac-
commodate users
of different abilities
as altering the angle
of standing changes
the forces acting on
the child
3
pg
23
2
Height
Adjustment
Benefits: The
stander can
accommodate users
of different heights
pg
20
Tray
Benefits: The tray
gives a surface for the
child to play and learn
on. It is adjustable for
height and angle and
can be removed.
pg
17

Carers and
home users
Re-issue
and stores
Professional and
technical users
Frequent
Adjustments
CHAPTER TWO

15
Monkey
jenx.com
Castors & Safety Straps
Lock Castors
Press down on the lever
to lock the castor.
Lock castors before
using the stander.
To attach the Thoracic and Hip straps, pass the narrow portion of the strap under the
side pads and attach to the Velcro receptive material at the back of the pad.
Use the Velcro in the middle of the strap to secure your child and use the fine adjustment
of the thinner portion of the strap to set the final length.
Safety Straps

16
Frequent Adjustments
Safety Straps
To adjust the length of the safety strap, thread the strap through the buckle and tri-glide until desired length is
achieved. Ensure that the safety strap end is secured by the tri-glide at all times.
Always use the safety straps when the stander is in use. The safety strap should be secured on the outside of
the Hip and Thoracic straps and over the sidepads, as above.
Tri-glide
All belts and harnesses should be used at all times. For therapy purposes it may be necessary
to deviate from this rule and any deviation should be fully documented as part of a Risk
Assessment or Therapy Program and all relevant staff and carers appropriately trained. Secure
client with straps before adjusting product. Ensure finger’s width between safety strap and client
to prevent over tightening or client moving to inappropriate position. Adjust straps for each client
and changes of clothing. Minimum Velcro® overlap: 3 inches (7.5cm) on all straps. If strap is not
long enough: DO NOT USE PRODUCT.

17
Monkey
jenx.com
Tray Angle
To alter the tray angle first loosen the Wing Knobs circled above.
Alter the tray angle and re-tighten Wing Knobs to secure the angle.
Only the occupant of
the product should
lean on the tray

18
Frequent Adjustments
Tray Infill
The tray infill fits onto the top of the monkey tray, it simply slots under the tray rail.

CHAPTER THREE
Carers and
home users
Re-issue
and stores
Professional and
technical users
Clinical
Adjustments

20
Clinical Adjustments
Upper & Lower Pads
To alter the Upper Pad height, loosen
the 4 Wing Knobs circled above and
raise pad to the desired height before
re-tightening.
To alter the Lower Pad height, loosen
the Scallop Wheels circled above and
raise pad to the desired height before
re-tightening.