Jet JET-1010 User manual

Parts List for JET-1010 Impact Wrench
(Parts list on reverse side)
Specifications
Model Number................................................................................................................................................J-1010
Stock Number................................................................................................................................................505941
Square Drive (in.)....................................................................................................................................................1
Bolt Capacity (in.) ............................................................................................................................................. 1-1/4
Anvil Retainer Type....................................................................................................................................Ring/Hole
Maximum Torque (ft./lbs)...................................................................................................................................1250
Free Speed (RPM).............................................................................................................................................4100
Air Pressure (PSI).................................................................................................................................................90
Air Consumption (CFM) ........................................................................................................................................35
Air Inlet (NPT/in.)................................................................................................................................................. 1/2
Air Hose (ID/in.)................................................................................................................................................... 1/2
Vibration Value (m/s2).............................................................................................................................................8
Overall Length (in.)........................................................................................................................................16-3/16
Weight (lbs.).........................................................................................................................................................33
WALTER MEIER (Manufacturing) Inc.
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-505941
Ph.: 800-274-6848 Revision B 09/2013
www.waltermeier.com Copyright © 2013 Walter Meier (Manufacturing) Inc.

Specifications were current at time of publication, but because of our policy of continuous improvement, Walter Meier
(Manufacturing) Inc., reserves the right to change specifications at any time and without prior notice, without incurring
obligations.
Parts list for J-1010 Impact Wrench
Index Part No. Description Qty.
01 J1010-01 Rotor Vane 4
02 J1010-02 Rotor 1
03 J1010-03 Bearing Ref:BB-R16 1
04 J1010-04 Front End Plate 1
07 J1010-07 Liner Dowel Pin 1
08 J1010-08 Liner 1
09 J1010-09 Rear End Plate 1
10 J1010-10 Handle Gasket 1
11 J1010-11 Handle w/#14 Bushing 1
J1010-CP Grip Handle Assembly CP 1
12 J1010-12 Trigger 1
13 J1010-13 Trigger Pin 1
14 J1010-14 Throttle Valve Bushing 1
15 J1010-15 Throttle Valve 1
16 JET06-35 O-Ring P10 1
17 J1010-17 Throttle Valve O-Ring Ret 1
18 J1010-18 Air Strainer 1
19 J1010-19 Throttle Spring 1
20 J1010-20 Air Inlet 1
21 J1010-21 Reverse Valve Lever 1
22 J1010-22 Reverse Valve O-Ring 1
23 J1010-23 Reverse Valve 1
24 J1010-24 Reverse Valve Bushing 1
25 J1010-25 O-Ring 1
26 J1010-26 Motor Housing (New Style) 1
J1010-26A Motor Housing (Old Style) 1
27 J1010-27 Self-Tapping Screw 1
29 J1010-29 Handle Lock Washer 1
30 J1010-30 Handle Set Bolt 1
Index Part No. Description Qty.
31 J1010-31 Exhaust Deflector (New Style) 1
J1010-31A Exhaust Deflector (Old Style) 1
32 J1010-32 Dead Handle (New Style) 1
J1010-32A Dead Handle (Old Style) 1
33 J1010-33 Dead Handle Bolt (Old Style) 1
34 J1010-34 Clutch Housing (New Style) 1
J1010-34A Clutch Housing (Old Style) 1
35 J1010-35 Spring Pin 1
36 J1010-36 O-Ring 1
37 J1010-37 Pipe Plug 1
38 J1010-38 Clutch Housing Bushing 1
39 J1010-39 Washer 1
40 J1010-40 Clutch Hsng Set Bolt (New St) 1
J1010-40A Clutch Hsng Set Bolt (Old St) 1
43 J1010-43 Bearing Spacer 1
44 J1010-44 Dog Cam 1
45 J1010-45 Dog Cage 1
46 J1010-46 Clutch Dog Pin 1
47 J1010-47 Clutch Dog 1
48 J1010-48 Cage Bushing 1
49A J1010-49A Anvil Shank S 1
49B J1010-49B Anvil Shank L 1
49C J1010-49C Anvil Shank Spline S 1
49D J1010-49D Anvil Shank Spline L 1
50 J1010-50 O-Ring 1
51 130803144 Socket Ret Ring 1
60 J1010-60 Washer M6 4
61 J1010-61 Dead Handle Bolt M6x15 4
Replacement Parts
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for
business hours, www.waltermeier.com). Having the Model Number and Serial Number of your product available
when you call will allow us to serve you quickly and accurately.