JideTech 94H2 User manual

JideTech USB KVM Switch
USER MANUAL
Note: This manual contains the parameters and instructions of the 5 models (21UA /
41UA / 94H2 / 9138H / 9116H). Please be sure to find the corresponding product
description for your purchased product and use the product correctly. Thank you.

Contents：
KVM Switch Series
HDMI KVM Switch
4 Port 94H2 P01
8/16 Port 9138H/9116H P07
VGA KVM Switch
2/4 Port 21UA/41UA P10
Service Guarantee
Customer Service Support

1
4 Port HDMI USB KVM Switch
Model: 94H2
Product Features:
•One USB console controls 4 HDMI-interface computers /DVR/NVR
•Switch Mode: a. button push; b. Keyboard Hot-Key switch; c. mouse switch;d.Wire remote
push button switch
•Superior video quality: 4K(HDTV)/4096×2160@60Hz
•Multiplatform support: Windows 10/7/2000/XP/Vista、Linux and Mac;
•Support plug & play
•Support HDCP, Support auto EDID(No EDID emulation)
•Support auto detection，if one computer is powered off, the switch will automatically switch
to the next powered-on computer (The default is in the closed state, if you want to open it,
please read the below-setting operation instructions ).
•With memory function in case of power-down
•Support independent mouse keyboard switch, even without USB signal input, you can switch
the input device easily by keyboard or mouse.
•Auto Scan Mode for monitoring all computers /DVR/NVR
•With USB2.0 Hub
Switch Modes:
●Button Switch：Switch to any port by buttons on front panel.

2
●Click mouse Switch :
a. Double click the middle roller of mouse, then press the right mouse button to switch
to the next port.
b. Double click the middle roller of mouse, then press the left mouse button to switch to
the previous port.
●Keyboard Hot-key Switch : Fox example, double click the right
【Ctrl】+1/2/3/4【Enter】
Hotkey Setting：
Default hot-key is the right【Ctrl】.If use the right【Ctrl】conflict with other hot-key，The
hot-key can be set to【Num lock】key，or【Scroll Lock】.

3
Fox example:
Double click the right【Ctrl】+【Num lock】+【Enter】
Hotkey change to【Num lock】
Double click the right【Ctrl】+left【Ctrl】+【Enter】
Hotkey change to th left【Ctrl】
Double click the right【Ctrl】+【Scroll Lock】+【Enter】
Hotkey change to 【Scroll
Lock】
If the hotkey is changed to【Scroll Lock】，you want to change it to the left【Ctrl】,then double
click 【Scroll Lock】+the left【Ctrl】+【Enter】
Keyboard hot-key Operation：
Notes:
1. The n stands for the computer's Port ID number (1, 2, 3, 4) or Number 8 to 999.
2. When the auto scan function is activated, you can press any key on the panel, the
auto scan function turns off automatically.
3.If the computer enters into sleep mode. You must press the computer's power
button to wake it up. we recommend the users do not set the computers to enter
sleep mode.
Double click the right【Ctrl】N
【Enter】
The KVM can switch to the device you choose.
Double click the right【Ctrl】 【S】
【Enter】
Turn on/off the auto-scan function, or you can
press the scan button on front panel
Double click the right【Ctrl】 【S】N
【Enter】
Set the scan interval，Can set to 8-999 seconds
（The system defaults to 8 seconds）
Double click the right【Ctrl】 【B】
【Enter】
Turn on/off the beeping sound
Double click the right【Ctrl】 【T】
【Enter】
Turn on/off the detection function (default is off)
Double click the right【Ctrl】 【R】
【Enter】
Reset the KVM System to solve the keyboard and
mouse freeze.
Double click the right【Ctrl】 【F1】
【Enter】
Solve the problem that mouse cannot be used
when HP notebooks enter BOIS
Double click the right【Ctrl】 【F2】
【Enter】
Solve the problem that mouse or keyboard
cannot be used in Mac
Double click the right【Ctrl】 【Z】
【Enter】
Solve the problem that mouse cannot be used in
Raspberry Pie system
Double click the right【Ctrl】 【TAB】
【Enter】
Restore the hotkey to the default --- right【Ctrl】
Double click the right【Ctrl】 【ESC】
【ESC】 【ESC】 【Enter】
Reset factory setting for KVM switch to solve the
problem of keyboard and mouse

4
LED Indicator：
1. Orange lightning: The current operating port
2. Hotkey lightning: This key default is turn on, “Hotkey on”light is green.
3. SCAN lightning: Indicate the KVM enters the auto-scan mode
Sound Card Settings（Optional）:
1.HDMI Sound Settings
Right click on the desktop taskbar, popup task box , Click “Playback
devices”, then jump out of the interface shown in Figure A.
Then select the “AMD HDMI Output”, right click and show as Figure B. And then
select the “Set as Default Device”.
It displayed tick status , which indicates successful setup. As
Figure C.
Figure A Figure B
Figure C

5
2．3.5 Interface Sound Settings
Right click on the desktop taskbar, popup task box , Click ‘3.5
Loudspeaker', then jump out of the interface shown in Figure A.
Then select the ‘3.5 Loudspeaker', right click and show as Figure D. And then select
the 'Set as Default Device'.
It displayed tick status , which indicates successful setup.
As the Figure E.
Figure D Figure E
Connection Diagram:
94H2

6
◆FAQ
Q: keyboard or mouse does not work?
A: 1.first, make sure that the USB cable or socket are already connected to the computer
side, there is no signal exception, and the power has been connected.
2.After the image switch normally, Mouse and keyboard access to the KVM switcher, wait a
few seconds for the computer to complete the drive recognition.
3.Turn off the KVM and restart power to re-identify
Q: No display
A: Check the cables if connected well or the cable problem.
Q:When you connect with macOS,the mouse clicks are not working?
A:For MAC and Linux system, the mouse/keyboard maybe out of control, you need to double click
the right【Ctrl】+【F2】+【Enter】, then the mouse/keyboard will back to normal.

7
8/16 Port HDMI USB KVM Switch
This USB HDMI KVM Switch combines the unique streamline design and innovative features.
can fully meet today's diversity of the multimedia SOHO environment'needs. Widely used in the
home or office multimedia applications.
Model: 9138H/9116H
Product Features:
• 8/16 ports HDMI USB KVM Switch;
•One USB console controls 8/16 HDMI-interface computers;
• Switch Mode: a. button push b. Keyboard Hot-Key switch;
• HDMI digital monitor support -fully compliant with HDMI 1.4a; also HDCP compliant, EDID ;
• Support Dolby True HD and DTS HD Master Audio;
• Superior video quality: 480i, 480p, 720p, 1080i, and 1080p(HDTV), 3840x2160@30Hz;
• Multiplatform support: Windows 10/7/2000/XP/Vista、Linux and Mac;
• Support plug & play ;
Switch Modes：
Button Switch：Switch to any port by buttons on front panel.
Keyboard Hot-key Switch Mode：Double click the right【Ctrl】+1/2/3/4……
13/14/15/16 +【Enter】
Hotkey Setting ：
Default hot-key is the right【Ctrl】.If use the right【Ctrl】conflict with other hot-key，
The hot-key can be set to【Num lock】key，or【Scroll Lock】.
For example：
Double click the right【Ctrl】+【Num lock】+【Enter】
Hotkey change to【Num lock】
Double click the right【Ctrl】+left【Ctrl】+【Enter】
Hotkey change to th left【Ctrl】
Double click the right【Ctrl】+【Scroll Lock】+【Enter】
Hotkey change to 【Scroll Lock】
If the hotkey is changed to 【Scroll Lock】，You want to change it to the left 【Ctrl】,Then double
click 【Scroll Lock】+the left【Ctrl】+【Enter】

8
Keyboard hot-key Operation：
Default hot-key: the right【Ctrl】
Notes:
1. The n stands for the computer's Port ID number (1, 2, 3, …… 16) or Number 8 to 999.
2. When the auto scan function is activated, you can press any key on the panel, the auto scan
function turns off automatically.
3. If the computer enters into sleep mode. You must press the computer's power button to
wake it up. we recommend the users do not set the computers to enter sleep mode.
LED Indicator：
1.Orange lightning: The current operating port
2.Hotkey lightning: This key default is turn on, “Hotkey on”light is green.
3.SCAN lightning: Indicate the KVM enters the into-scan mode
Specification：
Computer connections
8/16
Port Selection
Pushbutton；Hotkey
Interface
Console
Ports
Keyboard
1×USB Type A Female
Monitor
1×HDMI Type A Female
Mouse
1×USB Type A Female
Double click the right【Ctrl】N
【Enter】
The KVM can switch to the device you choose.
Double click the right【Ctrl】 【S】
【Enter】
Turn on/off the auto-scan function, or you can
press the scan button on front panel
Double click the right【Ctrl】 【S】N
【Enter】
Set the scan interval，Can set to 8-999 seconds
（The system defaults to 8 seconds）
Double click the right【Ctrl】 【B】
【Enter】
Turn on/off the beeping sound
Double click the right【Ctrl】 【T】
【Enter】
Turn on/off the detection function (default is off)
Double click the right【Ctrl】 【R】
【Enter】
Reset the KVM System to solve the keyboard and
mouse freeze.
Double click the right【Ctrl】 【F1】
【Enter】
Solve the problem that mouse cannot be used
when HP notebooks enter BOIS
Double click the right【Ctrl】 【F2】
【Enter】
Solve the problem that mouse or keyboard
cannot be used in Mac
Double click the right【Ctrl】 【Z】
【Enter】
Solve the problem that mouse cannot be used in
Raspberry Pie system
Double click the right【Ctrl】 【TAB】
【Enter】
Restore the hotkey to the default --- right【Ctrl】
Double click the right【Ctrl】 【ESC】
【ESC】 【ESC】 【Enter】
Reset factory setting for KVM switch to solve the
problem of keyboard and mouse

9
Input
Ports
Keyboard/Mouse
8/16×USB Type B Female
Monitor
8/16×HDMI Type A Female
Power
1×DC Power Adaptor
Switch
Select
8/16×Port
LED
Indicator
KVM
8/16
USB connection
8/16
Monitor Resolution
3840x2160@30Hz
Scan Interval
8-999 seconds
Power Consumption
DC5V, 3.2W
Environment
Operating Temp
0-50℃
Storage Temp
-20-60℃
Humidity
0-80％RH, Non-condensing
Physical
Properties
Housing
Metal
（Length×Width×Height）
440×150×42MM
Connection Diagram:
9138H

10
2/4 Port VGA USB KVM Switch
Model: 21UA/41UA
Product Features:
• 2/4 ports VGA KVM Switch;
• Multiplatform support: Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS;
• Max Resolution support 2048 x1536;
• Including Audio Speaker and microphone Switch;
• Work signal light, Indicates that the currently displayed LED address of the LED is on;
• Support USB2.0 and Connect USB Hub Sharing for USB peripheral device;
• No need adapter for power supply.
Switch Modes：
Button Switch：Simply press the appropriate port selection switch on the front
panel. After you press the switch, the select LED lighting to indicate that the
port is currently selected.
Diagram: (4 Port)

11
How to Connect：
Note: The USB KVM Switch does not require any drivers or software.
1. Turn off both computers and their peripherals, and disconnect all power
cords.
2. Connect the shared keyboard, monitor, mouse, printer(optional), microphone
(optional) and speaker (optional) to the KVM Switch's console port.
3. Use the provided KVM and audio cables to connect your PC to your KVM
switch.
4. Turn ON the first computer and wait until startup completes.
5. Press the face panel button on the KVM Switch to select the second computer
(Optional).
6. Turn ON the second computer and wait until startup completes.
Your installation is now complete.
Diagram: (4 Port)

12
FAQ
Q1: Where is the power supply? I did not find one in the box.
A1: The USB KVM switch does not require a power supply. It draws power from your
computer's USB connection. As long as your KVM switch is connected to the USB port,
it will receive the necessary power to function.
Q2: Can I connect and disconnect the USB cables while the computers are turned on?
A2: Yes, you can connect or disconnect the USB cables while the computers are turned on
because the USB interface is Hot-Pluggable.
Q3: Will the KVM switch remember the keyboard settings between computers?
A3: Yes the KVM switch will remember the keyboard settings when switching between your
computers.
(i. e.: Caps Lock, Num Lock, etc.)
Q4: How do I switch from one computer to another with the KVM switch?
A4: Push Buttons.
Q5:No display?
A5:If you connect the laptop,You can try to press "windows+P" to copy a screen or extend a
screen;
Q6: I have the KVM switch connected properly, but my keyboard and mouse don't work.
A6: First, make sure your USB port is working properly by testing it with your other USB
devices. Second, once you confirm that the USB port is functional, please reboot your
computers, and try to use the KVM switch again.
Note: If the above steps still have problems, try to down load the USB driver as below link:
http://www.gentlen168.com/vga-switch/splitter/info/832.html

13
Service Guarantee
If you have any other questions, please visit the official website of Shenzhen
JideTech Development Co., Limited or consult the customer service email
address.
Company Name: ShenZhen JideTech Development Co., Limited
Company Address: 9F Niulanqian Building
Minzhi Avenue, Minzhi Street, Long Hua District,
Shenzhen Guangdong, China, 518109
Website: www.jidetech-kvm.com
Email: [email protected]/c[email protected]om
Tel: [phone]
WhatsApp: [phone]
Skype: JideTech CC
Facebook: JideTech INT
Wechat: 135 4401 2806