JLab Bouncer User manual

Music Link
Wireless Speaker

Safety Information
9.
Do not defeat the safety purpose of the polarized
or grounding - type plug. a polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. The optimum operating temperature is 0℃~40℃.
11. The optimum humidity is 30%~80%.
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
12
. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus. If the power cord is damaged, it
must be repaired by a qualified repairer.
13. Only use attachments/accessories specified by
the manufacturer.
14. Use only with the cart, stand, tripod, bracket or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
15. Unplug this apparatus during lightning storms or
when unused for long periods of time.
16. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord
or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has beendropped.
17. The apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
18
. The mains plug or an appliance coupler is used as
the disconnect device, the disconnect device shall
remain readily operable.
19. Please read Rating Labels at the back of the unit
for power input and other safety information.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of electricalshock, fire, etc.:
1. Read these instructions.
2. Keep these Instructions.
3. Heed all Warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth. For stubborn stains, use
a soft cloth dampened with a weak solution of mild
detergent and water. Dry the apparatus
immediately afterwards with a clean cloth. Do not
use abrasive clothes, thinners, alcohol, or other
chemicalsolvents, because they may damage the
finish or remove the panel lettering.
7.Do not block any ventilation openings. The
ventilation shall not be impeded by covering the
ventilation openings with items, such as
newspapers, table clothes, curtains, etc.
8.Do not install near any heat source such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.

Contents
Safety Information .....................................................................................................................2
Contents ....................................................................................................................................3
Introduction...............................................................................................................................4
Package content.................................................................................................................4
Front Overview ..................................................................................................................5
Back Overview ..................................................................................................................6
Remote Control Overview ..................................................................................................6
Bluetooth Mode.........................................................................................................................7
Turning on .........................................................................................................................7
Pairing with Bluetooth devices............................................................................................7
Calling and Answering...............................................................................................................8
Making a call .....................................................................................................................8
Answering a call ................................................................................................................8
Aux in Mode .............................................................................................................................8
Troubleshooting.........................................................................................................................9
Technical information .............................................................................................................. 10
Statements............................................................................................................................... 10

Introduction
Thank you for purchasing the Wireless Link Mobile Speaker. Enjoy music wirelessly from your
smartphone, tablet, laptop, or other Bluetooth enabled device anywhere you choose.
Package content
What you can find inside of your package:
Main unit
Remote
Control
AC/DC
Adapter
Instruction
manual

Front Overview
Control All mode
/ MODE
a. Press to turn on speaker.
b. While speaker is turned
on, press to convert between
Bluetooth and Aux in mode.
c. Long press to turn off speaker.
When receive a call, press to answer the call, press again to end
the call.
Press to adjust volume level.
Red indicator Illuminates while speaker is turned on.
Blue indicator
a. Blinks slow means speaker is attempting to pair with a new
Bluetooth device or connect to a paired Bluetooth device.
b. Remains steadily on means speaker is connected to a paired
Bluetooth device.
c. Indicator off means speaker is in Auxmode.

Back Overview
Items Remark:
Power cord socket: Connect to DC adaptor.
AUX IN socket:It is for connecting the audio cable.
USB charging port Output a 5V voltage for charging your smart phone.
Remote Control Overview
Remark
Press to turn on/off speaker.
Press to mute speaker.
Press to increase volume, press to
decrease volume.
Press to previous track, press
to next
track, press to pause/play.
Long press to fast forward, long press to
fast rewind.
Press to enter Bluetooth mode.
Press to enter answer mode.
Press to enter Aux in mode.

Bluetooth Mode
Turning on
1. Before using your new Music Link Wireless Speaker the first time, you should connect
it to adapter.
2. Press / MODE to switch on. The Blue indicator blinks slow and waiting for pairing with
a new Bluetooth device or connecting to a paired Bluetooth device.
Pairing with Bluetooth devices
Pairing occurs when two Bluetooth devices communicate with each other and establish a
connection.A record of information about this connection is then stored in the memory of each
device. Once you pair a device with the Music Link Wireless Speaker, you should not have to
pair it again.
To begin pairing with a Bluetooth device
1. Turn on your Bluetooth device.
2. Set your Bluetooth device to “discover” the Music Link Wireless Speaker, then locate the
Bluetooth device list.
3. From the Bluetooth device list, select the device named “Music Link Wireless Speaker”.
4. If your device asks for a passkey, enter digits 0000 (four zeros) and press OK. Some
devices also ask you to accept the connection.
Your Bluetooth device indicates when pairing is complete. The Music Link Wireless Speaker
indicates pairing is complete when the Blue indicator remains steadily on.
To pair additional devices
Note: when you have paired Music Link Wireless Speaker with a Bluetooth device and
want to use another device instead, please set your first Bluetooth device to
“undiscover”.
To pair with another device, please follow “To begin pairing with a Bluetooth device” steps
1-4.

Calling and Answering
You can make or receive a call via Music Link Wireless Speaker.
Making a call
1. Make sure that your smart phone has connected to Music Link Wireless Speaker.
2. Dial a phone number, confirm to call. You can select an audio source from selections:
Music Link Wireless Speaker, your smart phone name and Speaker on your smart
phone.
3. Choose Music Link Wireless Speaker then you can start calling through Music Link
Wireless Speaker.
Answering a call
1. Make sure that your smart phone has connected to Music Link Wireless Speaker
speaker.
2. When you receive a call, press to answer. You can select an audio source from
selections: Music Link Wireless Speaker, your smart phone name and Speaker on
your smart phone.
3. Choose the Music Link Wireless Speaker and then can begin to talk through Music
Link Wireless Speaker.
Aux in Mode
You can use another audio device with your Music Link Wireless Speaker. This requires
using an audio cablewith a 3.5mm plug on one end to connect with the Auxinput on the Music
Link Wireless Speaker system.
4. Press / MODE to shift from BT. mode to Auxin mode.
5. Plug the cable from the audio device into the Auxconnector on the back of the Music Link
Wireless Speaker.
6. To gain optimal volume levels, adjusting the output volume level on both the source
device and the Music Link Wireless Speaker itself are recommended.

Troubleshooting
Problem What to do
Speaker will not turn
on Make sure your system is connected to a working mains outlet.
Paired Bluetooth
device will not
connect

If your device requires a passkey, make sure the one you entered
was correct.
Turn the Music Link Wireless Speaker off and back on.
Remove the Music Link Wireless Speaker from the pairing list on
your Bluetooth device pairing list. T
hen pair the device and the
Music Link Wireless Speaker again.
Music Link Wireless
Speaker
indicates a
connection, but is not
playing music

Turn off or disable Bluetooth on all other paired devices nearby
and reconnect the device you want to hear.
Turn the Music Link Wireless Speaker off and back on.
Cannot pair the
Music Link Wireless
Speaker
with my
Bluetooth device
Make sure your Bluetooth device is discoverable.
Your Bluetooth device maybe out of range – try moving it closer to
the Music Link Wireless Speaker.
Make sure your Bluetooth device supports the transfer of audio.
Move your Bluetooth device and/or Music Link Wireless Speaker
away from other devices that generate electromagnetic
interference.
If possible, turn off all other nearby Bluetooth devices or disable
their Bluetooth functionality.
Turn the Music Link Wireless Speaker off and back on.
No au
dio from a
Bluetooth device
Make sure your Music Link Wireless Speaker is not muted, and
the volume is up.

Make sure your Bluetooth device is playing audio, and the volume
is up.
Your Bluetooth device maybe out of range – try moving it closer to
the Music Link Wireless Speaker.
Turn the Music Link Wireless Speaker off and back on.
No audio from the
AUX source
Make sure your connected device is on and playing.
Make sure your Music Link Wireless Speaker is in Auxin mode.
Make sure the 3.5mm plug is fully inserted into the Music Link
Wireless Speaker.

Technical information
Power supply rating
Input: 100-240VAC, 50/60Hz
Output: 18VDC, 2A Max
Dimensions
H x W x D: 330mm x 135mm x115mm
Statements
Note: The manufacturer is not responsible for any RADIO or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, whichcan be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.