JUMA BTM Series User manual

JUMA Communications Ltd, Tel [phone]
4 Ednaston Home Farm Studios, [e-mail]
Brailsford, Ashbourne, Derbyshire, www.jumacommunications.com
DE6 3AY, UK

JUMA Communications Ltd, Tel [phone]
4 Ednaston Home Farm Studios, [e-mail]
Brailsford, Ashbourne, Derbyshire, www.jumacommunications.com
DE6 3AY, UK
Connecting the Adapter to Radio
STEP ONE: Connecting to Two-Way Radio
To connect your Bluetooth adapter to a two-way radio, follow these steps:
*Always turn off your two-way radio before connecting the Bluetooth adapter.
*Plug the Bluetooth Adapter BT-Adapter into the speaker-microphone / audio accessory jack of your two-way
radio.
*On some models of two-way radio, you may need to tighten a retaining screw to ensure that the Bluetooth
adapter remains attached to the radio
*Turn on your two-way radio and verify that the radio transmits and receives with the adapter attached. *
Because no wireless audio accessory will yet be paired to the Bluetooth adapter, received signals should be
heard over the radio’s internal speaker and transmitted signals will be sent using the radio’s internal
microphone.
*The Talk button on the Bluetooth adapter will not function as a Push-to-Talk button for your two-way radio
until a wireless audio accessory is successfully paired to the adapter.
Pairing With an Audio Accessory
STEP TWO: Pairing with an Audio Accessory
*Turn on the radio switch behind the BTM-XXX while holding down the PTT button on the Bluetooth adapter.
*Continue to hold the PTT button down for approximately 3 seconds.
*Release the PTT button when the status LED begins to flash two times per second.
*The Bluetooth adapter is now in audio accessory pairing mode. Activate the pairing mode on your compatible
wireless audio accessory.
*Once the wireless audio accessory and Bluetooth adapter are paired with each other, the status LED on the
adapter will show a constant blue light for three seconds.
*If the Bluetooth adapter does not detect a compatible wireless accessory within 60 seconds of being put into
pairing mode, the adapter will exit the pairing mode and resume normal operation.
*Once successfully paired, you will be able to operate your two-way radio using your compatible wireless
accessory.