Jumpking JK914 User manual

9ft x 14ft Oval Trampoline
WARNING: Read these assembly instructions carefully
before attempting to assemble or use this product. Keep
this user guide in a safe place for future reference.
User Guide
Got a Problem building your trampoline?
Call us on 1-877-927-8777 8am - 5pm CT Monday to Friday and we can help
Jumpking
®
The trampoline / enclosure is designed for users weighing 90kg (200lbs) or less.
Model: JK914

5
7
31
30
9ft x 14ft Oval Trampoline
Model: JK914
your
Support

Adequate overhead clearance is essential. A
minimum of 7.3m (24ft) above the ground is
recommended. Provide clearance for wires, tree
limbs, and other possible hazards.
Inspect the trampoline and trampoline enclosure
before each use, and replace any worn,
defective, or missing parts. Make sure the frame
padding, barrier, enclosure tubes and foam
sleeves are correctly possitioned.
Maintain at least 2.5m (8.2ft) on around all sides
of the trampoline. This area should not included
concrete, asphalt, brick, or other hard surfaces
as these can cause serious injuries.
Climb on and off the trampoline. It is a dangerous
practice to jump from the trampoline to the floor or
ground when dismounting, or to jump onto the
trampoline when mounting. Do not use the trampoline
as a springboard to other objects.
Trampoline equipped enclosure is recommended for
safety.
-

Stop bouncing by flexing knees as feet come in contact
with the trampoline bed. Learn this skill before attempt-
ing others.
Please do NOT wear jewelry when jump on trampolines.

Thank you for selecting a Jumpking trampoline
/ enclosure. “Jumpking” is designed and
crafted to provide many years of fun and
fitness. This trampoline/enclosure comes
equipped with warnings and instructions for the
assembly, care, maintenance and use of the
trampoline/enclosure. This information must be
read by all trampoline supervisors and users
before any person is allowed to use the
trampoline/enclosure.

BUILDING YOUR TRAMPOLINE
Description:
Safety glasses
Description:
Phillips-head screwdriver
Description:
Mallet
Description:
Gloves
WHAT YOU WILL NEED
1. This is a 2 person build.
2. Time for build is approximately 2 hours.
3. Choose a good location:
(wood chippings, sand or grass).
(7.3m) from ground level, away from
wires, trees and other possible hazards.
(2.5m) around sides, away from walls, fences, structures, asphalt
and other hard surfaces and play areas.
15

16
PARTS LIST
Part APart B
Description:
Top Tube with
T-Connector +
welded tube
6 top 4 bottom
Quantity: 2
Description:
Top Tube with
T-Connector +
welded tube
5 top 4 bottom
Quantity: 6
Part FPart H
Part K
Part P
Part I
Part NPart O
Part C
Part M
Part L
Part GPart J
Description:
Stitched bed
Quantity: 1
Description:
Top enclosure poles
Quantity: 8
Description:
Enclosure netting
Quantity: 1
Description:
Enclosure pole
cover
Quantity: 8
Description:
Anchors
Quantity: 2
Description:
Springs
Quantity: 74
Description:
Bottom enclosure
poles
Quantity: 8
Description:
Cords
Quantity: 2
Part DPart E
Description:
Leg extensions
Quantity: 8
Description:
Spring tool
Quantity: 1
Description:
Quantity: 8
Description:
Center legs
Quantity: 4
Description:
Frame pad
Quantity: 1
Description:
Black G3 poles
Quantity: 2
Self tapping screws

STEP 1 : ASSEMBLING THE FRAME
You will need the following parts to complete
step 1:
6 x Top Tubes with T-connector - Part A
2 x Top Tubes with T-connector - Part B
8 x Leg extensions - Part D
4 x Center legs - Part C
Insert the narrow end of the top tube into
Complete the 2 sections as below image shown.
T-connector.
A
C
D
Top tube
Center leg
Leg extension
17
First we will complete one of the two sections of
the trampoline frame.
Insert the narrow end of the top tube into
T
Complete the 2 sections as image shown.
-connector.
Then we will complete another one of the two
sections of the trampoline frame.
AA
BTop tube
A
BA
A
B
C
D
Insert the center leg into onto the top of the leg
extension tube and tap down until fully
B
A
A
C
D
A
B

18
Important: The frame is held together under
tension so you will have to use some force to
insert certain parts.
Place your feet on the top tubes and grip the leg
extension with both hands.
Pull the extension until it can be insert into the
T-connector.
Insert the end of leg extension into the
T-connector.
Push down on the end of the center leg to fully
insert the leg extension into the T-connector.
Insert another leg extension into the other end of
the center leg.
Repeat the last two steps until you have
assembled the two sections of the trampolines
frame.
You have now completed step 1.

19
STEP 2 : ASSEMBLING THE FRAME
This step will require 2 people who must be
wearing gloves.
Slot two of the frame section together as shown in
the diagram.
While one person holds the assembled sections
upright, the other person can insert a second section
onto the end of the assembled sections.
Now add the third and section.
You will now need to slot the frame together, this
will take some force. The easiest method is if the
two people face each other.
Important: Ensure all of the top tubes, leg
extensions and center legs are fully inserted.
The frame is now assembled and you have
completed step 2.
Hold the top tubes either side of the
T-connector+welded tubes and push
towards each other until the loose end of the
frame can be inserted into the T-connector.

20
STEP 3 : FITTING THE STITCHED BED
This step will require 2 people who must be
wearing gloves and protective eye wear.
Lay the stitched bed (with the V-Rings) out inside
the frame of the trampoline with the warning labels
facing upwards.
Locate the 2 V-Rings with the yellow stitching.
These will be at 180º to each other.
Attach one of the springs to one of the yellow
stitched V-Rings as shown.
Important: springs must be attached correctly.
Insert the other end of the spring into one of the
spring slots in the top of the frame.
IMPORTANT: Ensure the spring is fully
inserted into the slot on the top of the frame.
Yellow
stitching