JUNGLE JUMPAROO Mini User manual

JUNGLE JUMPAROO
1349 S 500 E STE. 240
American Fork, UT 84403
[email protected]
888-980-JUMP (5867)
CONGRATULATIONS on your new Mini Jungle Jumparoo! We are so excited that you are now a part of the Jungle
Jumparoo family! We hope you have years of fun ahead with your new Mini Jungle Jumparoo! Below you will find assembly
instructions and tips on care for your Mini Jungle Jumparoo.
ASSEMBLY AND DISASSEMBLY:
Before you begin to assemble your Mini Jungle Jumparoo, please note the following: Do not over tighten the bolts, this can
damage the treads making it impossible to take your Mini Jungle Jumparoo apart and reassembling at another time. To move
your Mini Jungle Jumparoo through a doorway simply remove the tube from the cage, remove the set screw in the base and
remove the 2 base connectors. When walking through the doorway simply pinch the 2 sections together.
GAMES:
Kids love to use their imagination on the Mini Jungle Jumparoo, it is more than just a jump toy! Because it forms a circle it can
be used for social play as well. Some of the popular games for the Mini Jungle Jumparoo include: King of the Jumparoo,
Marco/Polo, Chasing game by running around the bars in one direction, musical Jumparoo (musical chairs, but using each pole
color as the "chair") Color pole play with each pole representing something (fire, Ice, nature and sun) and Simon Says. If you
have a fun game that you like to play on your Jungle Jumparoo we would love to hear tag us on Social
Media @junglejumparoo or email us at [email protected]!
ADD ONS:
We offer additional accessories for your Jungle Jumparoo on our website www.JungleJumparoo.com! Our
most popular accessories include: The Rope Swing with its easy to adjust length allowing all ages to swing safely, the Turret
sprinkler, to beat the summer heat and last the Tube Cover which adds a bright colorful finish look to the Jungle Jumparoo!
WARNING:
Jump safely! Always have an adult present when in use. Do not flip or invert. Do not wear items that can damage the Mini
Jungle Jumparoo inner tube (cleats, heels etc.) Place Mini Jungle Jumparoo on a flat area with padding, carpet, rug or grass.
Do not place the Mini Jungle Jumparoo on cement or directly on hardwood floors. Do not place Mini Jungle Jumparoo on a hill
or incline, this presents a tipping hazard. Pull Mini Jungle Jumparoo away from walls or other hazards when in use. Do not climb
to the top of the cage or attempt to pull the cage over. Always keep both hands on the bars when jumping, do not use the rope
swing when jumping. Do not put any part of the body through the hexagon. If used outdoors the inner tube can become very
hot, please use caution. If stored outside keep the Mini Jungle Jumparoo covered when not in use.
WARRANTY:
The Mini Jungle Jumparoo frame is under warranty for 1 year. Warranty does not cover defects or damage due to improper
installation, cosmetic imperfection or damage caused by normal outdoor use of products that have been damaged by nature,
negligence, misuse, accidents or events beyond Jungle Jumparoo's control. The Mini Jungle Jumparoo Inner Tube, although
the inner tube should last for years, we cannot warranty the inner tube for daily use. If you find a defect with the inner tube at the
time of purchase, we will happily replace the defective item. Please see page 3 for more information regarding the Inner Tube.
You can also find our warranty information on our website at:https://junglejumparoo.com/pages/warranty and Jungle
Jumparoo Care and Maintenance at: https://junglejumparoo.com/pages/jungle-jumparoo-care

JUNGLE JUMPAROO
1349 S 500 E STE. 240
American Fork, UT 84403
[email protected]
888-980-JUMP (5867)
PARTS INCLUDED:
ASSEMBLY INSTRUCTIONS
6 POLES - 2 OF EACH COLOR
12 NUTS
ASSEMBLE BASE
Connect the two large base pieces with the
small base connectors, with the base laying flat
carefully insert the small blue
base connector into the base piece align the
groove of the connector with the hole on the
bottom of the base
Install 4 black set screw with small allen wrench
to secure screwing in until flush and tight
a.
b.
12 BOLTS 12 WASHERS 10 SET SCREWS
2 BASE CONNECTORS1 HEXAGON 1 WRENCH, 2 ALLEN
WRENCH, 1 VALVE TOOL
1 CUSTOM MINI
INNER TUBE
INSTALL THE POLES
Place poles onto the prongs on the base in desired color
pattern, ensure each pole is lowered completely onto the
base prong
a.
INSTALL OCTAGON TOP
Install each flat bolt with washer and locking nut on
hexagon for each pole. Screw should not be tightened
fully until assembly is complete.
a.
2 BASE PIECES

JUNGLE JUMPAROO
1349 S 500 E STE. 240
American Fork, UT 84403
[email protected]
888-980-JUMP (5867)
TIGHTEN SCREWS
Once all poles are secured
to the hexagon begin
tightening the bolts
alternating bolts that are
across from one another
Secure each pole at the
base with 6 remaining black
set screws until flush with
pole
a.
b.
INSTALL TUBE
Inflate inner tube to 12-14
inches high using start stop
method (see below for
detailed instructions)
Once inflated slide inner
tube down poles with valve
stem facing down
a.
b.
IMPORTANT INFORMATION:
To inflate your Inner Tube, you will need a standard air compressor, to ensure proper inflation we recommend using the start\stop
method; small burst of air then stop, continue until full. This keeps the tube round and helps the air disperse within the
tube evenly. Tube will be firm to the touch when inflated. PLEASE NOTE: There is no PSI reading on the tube since there is not
an outer tire. The tube will stand about 12-14 inches high when properly inflated. During inflation If you notice any asymmetry in
your tube remove any air in the tube and re-inflate slowly using the stop and start air flow method to prevent bulging. Due to the
heavy rubber compound it can take a few weeks for your tube to break-in and may require more air, we recommend filling the
tube slowly and adding more as needed. Over inflation of the tube can cause bulging, decreases the life of the tube and can
cause it to pop prematurely. If you encounter a slow leak in your new inner tube it is likely due to the inner valve stem core. If this
part is not tightened all the way it will allow air to slowly leak over time. Use a small part of tweezers or the valve tool that came
with your Jungle Jumparoo to tighten this part by turning the inner pin in the valve stem clock-wise (to the right) until it stops. You
can also remove this part to deflate the inner tube quickly by unscrewing this part counter-clockwise (to the left).
There are a few key steps you can take to ensure the longevity of your Inner Tube:
Avoid abrasive or corrosive chemicals, such as pool treatment chemicals, motor oil, industrial cleaning solutions, sharp
objects, high heels, sports cleats, weed whackers lawn mowers etc.
Avoid Sunlight/UV exposure using a tarp or All-Weather cover when unit is not in use. The Jungle Jumparoo Tube cover will
also add a layer of protection and protect little feet from a hot tube but is not UV/Weather resistant and will need to be coverd
when not in use when used outdoors.
Avoid extreme temperatures hot and cold, removing air for the hotter summer months. Leaving the tube in direct sunlight or
hot temperatures can cause the tube to rupture.
Under inflation or Over inflation Extended periods of disuse (such as seasonal storage) Inner tubes that are used often will last
longer as this maintains the elasticity and flexibly of the rubber. Regular use causes the inner tube to flex and compress,
pushing this protective substance to the surface. This doesn’t happen in an unused inner tube, so the rubber is more
vulnerable to damage from ozone and oxidation.
Over inflation, storage in direct sunlight, improper inflation which caused bulging and contact with sharp objects is not covered
by warranty and will significantly decrease the lifespan of the tube. It is recommended that air be removed from the tube during
hotter months.

JUNGLE JUMPAROO
1349 S 500 E STE. 240
American Fork, UT 84403
[email protected]
888-980-JUMP (5867)
JUNGLE JUMPAROO CARE AND MAINTENANCE
BEFORE EACH USE:
Inspect and tighten all bars and bolts as needed
Visually inspect the inner tube for proper inflation
Over inflation, storage in direct sunlight and improper inflation which caused bulging is not covered by warranty and will
significantly decrease the lifespan of the tube. It is recommended that air be removed from the tube during hotter months
to avoid tube rupture.
Check for any signs of visible damage or wear to the tube
BEGINNING OF EACH SEASON:
Tighten all hardware
Check all bolts and set screws to ensure they are screwed together tight and properly, set screws should be flush with bar
Replace any missing bolts or set screws as needed
Check tube for wear or rubber rot, add or remove air as needed for proper inflation. It is recommended that air be removed
from the tube for hotter summer months if used outdoors as heat can cause the tube to rupture if it does not have proper
room to expand.
Many people do not understand why their tube will suddenly not hold air after being packed away all winter long, the answer
is simple. When rubber is not is use it begins to breakdown causing rubber rot. The best thing you can do to prolong the use
of your tube is to use it as often as possible!
Use a UV protectant on your inner tube to increase the lifespan of the tube
If using the Mini Jungle Jumparoo outdoors, we recommend wiping the Mini Jungle Jumparoo down with CRL or a similar
product then applying a clear sealant coat on the powder coating every season to seal any cracks or wear that may
developed over time and use.
END OF THE SEASON:
Bring the Mini Jungle Jumparoo indoors at the end of the outdoor season, or when temperatures drop below 40
degrees Using the Mini Jungle Jumparoo year-round will increase the life of your Inner Tube substantially
If using the Mini Jungle Jumparoo outdoors, we recommend wiping the Mini Jungle Jumparoo down with CRL or a similar
product then applying a clear sealant coat on the powder coating every season to seal any cracks or wear that may
developed over time and use.
Leaving the Mini Jungle Jumparoo outdoors in cold temperatures can cause the powder coating to fade, chip and will
drastically reduce the lifespan of the tube
Visit us at https://junglejumparoo.com/pages/jungle-jumparoo-care
for additional care and maintenance of your Jungle Jumparoo!