Jupiter AX411 Access Point Installation instructions
AX411 Access Point
Hardware Guide
Published: 2012-08-30
Revision 04
Copyright © 2012, Juniper Networks, Inc.
Juniper Networks, Inc.
1194 North Mathilda Avenue
Sunnyvale, California 94089
USA
408-745-2000
www.juniper.net
This product includes the Envoy SNMP Engine, developed by Epilogue Technology, an Integrated Systems Company. Copyright © 1986-1997,
Epilogue Technology Corporation. All rights reserved. This program and its documentation were developed at private expense, and no part
of them is in the public domain.
This product includes memory allocation software developed by Mark Moraes, copyright © 1988, 1989, 1993, University of Toronto.
This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation
and software included in the 4.4BSD and 4.4BSD-Lite Releases is copyrighted by the Regents of the University of California. Copyright ©
1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994. The Regents of the University of California. All rights reserved.
GateD software copyright © 1995, the Regents of the University. All rights reserved. Gate Daemon was originated and developed through
release 3.0 by Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s
HELLO routing protocol. Development of Gated has been supported in part by the National Science Foundation. Portions of the GateD
software copyright © 1988, Regents of the University of California. All rights reserved. Portions of the GateD software copyright © 1991, D.
L. S. Associates.
This product includes software developed by Maker Communications, Inc., copyright © 1996, 1997, Maker Communications, Inc.
Juniper Networks, Junos, Steel-Belted Radius, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United
States and other countries. The Juniper Networks Logo, the Junos logo, and JunosE are trademarks of Juniper Networks, Inc. All other
trademarks, service marks, registered trademarks, or registered service marks are the property of their respective owners.
Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify,
transfer, or otherwise revise this publication without notice.
Products made or sold by Juniper Networks or components thereof might be covered by one or more of the following patents that are
owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479, 6,406,312,
6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.
AX411 Access Point Hardware Guide
Copyright © 2011, Juniper Networks, Inc.
All rights reserved. Printed in USA.
Revision History
October 2009—Revision 01
March 2010—Revision 02 Revise configuration for new SRX factory defaults, add procedure for returning to factory default, add procedure
for setting country-specific settings, add antenna specs.
July 2011—Revision 03 Revise maximum number of access points per services gateway.
July 2011—Revision 04 Revise maximum number of access points per services gateway.
The information in this document is current as of the date on the title page.
SOFTWARE LICENSE
The terms and conditions for using this software are described in the software license contained in the acknowledgment to your purchase
order or, to the extent applicable, to any reseller agreement or end-user purchase agreement executed between you and Juniper Networks.
By using this software, you indicate that you understand and agree to be bound by those terms and conditions.
Generally speaking, the software license restricts the manner in which you are permitted to use the software and may contain prohibitions
against certain uses. The software license may state conditions under which the license is automatically terminated. You should consult
the license for further details.
For complete product documentation, please see the Juniper Networks Web site at www.juniper.net/techpubs.
Copyright © 2012, Juniper Networks, Inc.ii
END USER LICENSE AGREEMENT
The Juniper Networks product that is the subject of this technical documentation consists of (or is intended for use with) Juniper Networks
software. Use of such software is subject to the terms and conditions of the End User License Agreement (“EULA”) posted at
http://www.juniper.net/support/eula.html. By downloading, installing or using such software, you agree to the terms and conditions
of that EULA.
iiiCopyright © 2012, Juniper Networks, Inc.
Copyright © 2012, Juniper Networks, Inc.iv
Table of Contents
AboutThisGuide..................................................ix
Objectives .........................................................ix
Audience ..........................................................ix
Documentation Conventions ..........................................ix
AX Series Documentation and Release Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi
ObtainingDocumentation.............................................xi
Documentation Feedback............................................xii
RequestingTechnicalSupport.........................................xii
Part 1 AX411 Access Point Overview
Chapter 1 Introduction to the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
AX411AccessPointDescription.........................................3
Deploying WLANs with AX411 Access Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
AX411 Access Point Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 2 AX411 Access Point Components and Features . . . . . . . . . . . . . . . . . . . . . . . . 9
AX411 Access Point Front Panel and LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
AX411AccessPointRearPanel........................................10
AX411AccessPointFeatures...........................................11
Part 2 Setting Up the AX411 Access Point
Chapter 3 Installation Overview for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . 15
Site Preparation Checklist for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . 15
General Site Guidelines for Installing the AX411 Access Point . . . . . . . . . . . . . . . . . 17
Tools and Parts Required to Install the AX411 Access Point . . . . . . . . . . . . . . . . . . 17
AX411AccessPointSetupOverview....................................18
Chapter 4 Unpacking the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
UnpackingtheAX411AccessPoint......................................21
Verifying Parts Received with the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . 21
vCopyright © 2012, Juniper Networks, Inc.
Chapter 5 Installing the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installing the AX411 Access Point on a Flat Surface . . . . . . . . . . . . . . . . . . . . . . . . 23
Installing the AX411 Access Point on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Installing the AX411 Access Point Mounting Bracket on a Wall . . . . . . . . . . . . 23
Attaching the AX411 Access Point to a Mounting Bracket Installed on a
Wall ......................................................24
Installing the AX411 Access Point in an Overhead Enclosure . . . . . . . . . . . . . . . . . 25
Installing the AX411 Access Point Mounting Bracket in an Overhead
Enclosure ..................................................26
Attaching the AX411 Access Point to a Mounting Bracket in an Overhead
Enclosure ..................................................26
Connecting External Antennas to the AX411 Access Point . . . . . . . . . . . . . . . 27
Installing the Overhead Enclosure Containing the AX411 Access Point . . . . . 28
Removing the AX411 Access Point Plastic Cover . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Chapter 6 Connecting the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
AX411 Access Point Connection Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Installing the AX411 Access Point Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the AX411 Access Point to the SRX Series Device . . . . . . . . . . . . . . . . 33
Providing Power to the AX411 Access Point Using Power over Ethernet . . . . . . . . 33
Providing Power to the AX411 Access Point Using the Power Supply . . . . . . . . . . 34
Powering On and Powering Off the AX411 Access point . . . . . . . . . . . . . . . . . . . . . 35
Chapter 7 Initially Configuring the AX411 Access Point Wireless LAN . . . . . . . . . . . . . . 37
AX411 Access Point Wireless LAN Initial Software Configuration Overview . . . . . . 37
Installing Licenses for the AX411 Access Point on the SRX Series Device . . . . . . . 39
AX411 Access Point Configuration Example: Layer 2 Mode (CLI) . . . . . . . . . . . . . . 40
AX411 Access Point Configuration Example: Layer 3 Mode (CLI) . . . . . . . . . . . . . . 41
Configuring AX411 Access Point Country-Specific Settings . . . . . . . . . . . . . . . . . . 42
Testing Connectivity to the AX411 Access Point Wireless LAN . . . . . . . . . . . . . . . . 46
Returning the AX411 Access Point to the Factory Default Settings . . . . . . . . . . . . 46
Part 3 Hardware Maintenance, Replacement, and Troubleshooting
Procedures for the AX411 Access Point
Chapter 8 Monitoring the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Monitoring the AX411 Access Point with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Monitoring the AX411 Access Point with the Command-Line Interface . . . . . . . . . 52
Chapter 9 Maintaining the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Routine Maintenance Procedures for the AX411 Access Point . . . . . . . . . . . . . . . . 55
Chapter 10 Troubleshooting the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Troubleshooting the AX411 Access Point with the LEDs . . . . . . . . . . . . . . . . . . . . . 57
Troubleshooting Communication Issues Between the AX411 Access Point and
theServicesGateway............................................58
Copyright © 2012, Juniper Networks, Inc.vi
AX411 Access Point Hardware Guide
Part 4 Appendixes
Appendix A Safety and Regulatory Compliance Information . . . . . . . . . . . . . . . . . . . . . . . 61
AX411 Access Point Definitions of Safety Warning Levels . . . . . . . . . . . . . . . . . . . . 61
AX411 Access Point General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . 63
General Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
QualifiedPersonnelWarning......................................64
RestrictedAccessAreaWarning...................................64
Preventing Electrostatic Discharge Damage to the Access Point . . . . . . . . . . 66
AX411 Access Point Fire Suppression Procedures and Equipment . . . . . . . . . . . . . 67
AX411 Access Point Installation Instructions Warnings . . . . . . . . . . . . . . . . . . . . . 68
AX411 Access Point Maintenance and Operational Safety Guidelines and
Warnings......................................................69
BatteryHandlingWarning........................................69
JewelryRemovalWarning.........................................70
LightningActivityWarning.........................................71
OperatingTemperatureWarning...................................72
ProductDisposalWarning........................................73
AX411 Access Point Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . 74
InCaseofElectricalAccident......................................74
General Electrical Safety Guidelines and Warnings . . . . . . . . . . . . . . . . . . . . . 74
AX411 Access Point WiFi Interoperability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
AX411AccessPointAgencyApprovals..................................76
AX411 Access Point Compliance Statements for EMC Requirements . . . . . . . . . . 77
AX411 Access Point Compliance Statements for Environmental
Requirements ..................................................78
AX411 Access Point Compliance Statements for Acoustic Noise . . . . . . . . . . . . . . 79
Appendix B AX411 Access Point Power Guidelines, Requirements, and
Specifications.....................................................81
AX411 Access Point Site Electrical Wiring Guidelines . . . . . . . . . . . . . . . . . . . . . . . 81
AX411 Access Point Power Supply Specifications and Requirements . . . . . . . . . . 82
Appendix C AX411 Access Point Wireless LAN Channels and Frequencies . . . . . . . . . . . 85
AX411 Access Point Country and Channel Support . . . . . . . . . . . . . . . . . . . . . . . . 85
AX411 Access Point Channels and Frequency Support . . . . . . . . . . . . . . . . . . . . . . 97
Appendix D AX411 Access Point Interface Cable Specifications and Connector
Pinouts..........................................................101
Interface Cable and Wire Specifications for the AX411 Access Point . . . . . . . . . . 101
RJ-45 Connector Pinouts for the AX411 Access Point Ethernet Port . . . . . . . . . . . 101
RJ-45 Connector Pinouts for the AX411 Access Point Console Port . . . . . . . . . . . 102
Appendix E AX411 Access Point Antenna Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 105
AX411 Access Point Antenna Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
viiCopyright © 2012, Juniper Networks, Inc.
Table of Contents
Appendix F Contacting Customer Support and Returning the AX411 Access Point
Hardware ........................................................111
Juniper Networks Technical Assistance Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Return Procedure for the AX411 Access Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Locating the AX411 Access Point Component Serial Number and Agency
Labels ........................................................112
Contacting Customer Support to Obtain a Return Materials Authorization . . . . . 113
Information You Might Need to Supply to Juniper Networks Technical
AssistanceCenter...........................................113
ContactingCustomerSupport.....................................113
Packing the AX411 Access Point or Component for Shipment . . . . . . . . . . . . . . . . 114
PackingtheAX411AccessPoint....................................114
Packing the Components for Shipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Part 5 Index
Index.............................................................119
Copyright © 2012, Juniper Networks, Inc.viii
AX411 Access Point Hardware Guide
About This Guide
•Objectives on page ix
•Audience on page ix
•Documentation Conventions on page ix
•AX Series Documentation and Release Notes on page xi
•Obtaining Documentation on page xi
•Documentation Feedback on page xii
•Requesting Technical Support on page xii
Objectives
This guide describes hardware components and installation, basic configuration, and
basic troubleshooting procedures for the Juniper Networks AX411 Access Point. It explains
how to prepare your site for access point installation, unpack and install the hardware,
power on the access point, perform initial software configuration, and perform routine
maintenance. After completing the installation and basic configuration procedures
covered in this guide, see the Junos OS WLAN Configuration and Administration Guide and
Junos OS CLI Reference for information about further Junos OS configuration.
Audience
This guide is designed for network administrators who are installing and maintaining
Juniper Networks AX411 Access Points or preparing a site for access point installation.
To use this guide, you need a broad understanding of networks in general and the Internet
in particular, networking principles, and network configuration. Any detailed discussion
of these concepts is beyond the scope of this guide.
Documentation Conventions
Table 1 on page x defines the notice icons used in this guide.
ixCopyright © 2012, Juniper Networks, Inc.
Table 1: Notice Icons
DescriptionMeaningIcon
Indicates important features or instructions.Informational note
Indicates a situation that might result in loss of data or hardware damage.Caution
Alerts you to the risk of personal injury or death.Warning
Alerts you to the risk of personal injury from a laser.Laser warning
Table 2 on page x defines the text and syntax conventions used in this guide.
Table 2: Text and Syntax Conventions
ExamplesDescriptionConvention
To enter configuration mode, type
theconfigure command:
user@host> configure
Represents text that you type.Bold text like this
user@host> show chassis alarms
No alarms currently active
Represents output that appears on the
terminal screen.
Fixed-width text like this
•A policy term is a named structure
that defines match conditions and
actions.
•Junos OS System Basics Configuration
Guide
•RFC 1997, BGP Communities Attribute
•Introduces or emphasizes important
new terms.
•Identifies book names.
•Identifies RFC and Internet draft titles.
Italic text like this
Configure the machine’s domain name:
[edit]
root@# set system domain-name
domain-name
Represents variables (options for which
you substitute a value) in commands or
configuration statements.
Italic text like this
•To configure a stub area, include the
stub statement at the[edit protocols
ospf area area-id] hierarchy level.
•The console port is labeled CONSOLE.
Represents names of configuration
statements, commands, files, and
directories; configuration hierarchy levels;
or labels on routing platform
components.
Text like this
stub <default-metric metric>;Enclose optional keywords or variables.< > (angle brackets)
Copyright © 2012, Juniper Networks, Inc.x
AX411 Access Point Hardware Guide
Table 2: Text and Syntax Conventions (continued)
ExamplesDescriptionConvention
broadcast | multicast
(string1 |string2 |string3)
Indicates a choice between the mutually
exclusive keywords or variables on either
side of the symbol. The set of choices is
often enclosed in parentheses for clarity.
| (pipe symbol)
rsvp { # Required for dynamic MPLS onlyIndicates a comment specified on the
same line as the configuration statement
to which it applies.
# (pound sign)
community name members [
community-ids ]
Enclose a variable for which you can
substitute one or more values.
[ ] (square brackets)
[edit]
routing-options {
static {
route default {
nexthop address;
retain;
}
}
}
Identify a level in the configuration
hierarchy.
Indention and braces ( { } )
Identifies a leaf statement at a
configuration hierarchy level.
; (semicolon)
J-Web GUI Conventions
•In the Logical Interfaces box, select
All Interfaces.
•To cancel the configuration, click
Cancel.
Represents J-Web graphical user
interface (GUI) items you click or select.
Bold text like this
In the configuration editor hierarchy,
select Protocols>Ospf.
Separates levels in a hierarchy of J-Web
selections.
>(bold right angle bracket)
AX Series Documentation and Release Notes
For a list of related AX Series documentation, see
http://www.juniper.net/techpubs/hardware/junos-ax/ax411 . If the information in the latest
AX Series Release Notes differs from the information in the documentation, follow the
AX Series Release Notes.
Obtaining Documentation
To obtain the most current version of all Juniper Networks technical documentation, see
the products documentation page on the Juniper Networks website at
http://www.juniper.net/techpubs .
Copies of the Management Information Bases (MIBs) available in a software release are
included on the documentation CDs and at http://www.juniper.net/techpubs.
xiCopyright © 2012, Juniper Networks, Inc.
About This Guide
Documentation Feedback
We encourage you to provide feedback, comments, and suggestions so that we can
improve the documentation. You can send your comments to
techpubs-comments@juniper.net, or fill out the documentation feedback form at
http://www.juniper.net/techpubs/docbug/docbugreport.html. If you are using e-mail, be
sure to include the following information with your comments:
•Document name
•Document part number
•Page number
•Software release version
Requesting Technical Support
Technical product support is available through the Juniper Networks Technical Assistance
Center (JTAC). If you are a customer with an active J-Care or JNASC support contract,
or are covered under warranty, and need postsales technical support, you can access
our tools and resources online or open a case with JTAC.
•JTAC policies—For a complete understanding of our JTAC procedures and policies,
review the JTAC User Guide located at
http://www.juniper.net/customers/support/downloads/710059.pdf .
•Product warranties—For product warranty information, visit
http://www.juniper.net/support/warranty/ .
•JTAC Hours of Operation—The JTAC centers have resources available 24 hours a day,
7 days a week, 365 days a year.
Self-Help Online Tools and Resources
For quick and easy problem resolution, Juniper Networks has designed an online
self-service portal called the Customer Support Center (CSC) that provides you with the
following features:
•Find CSC offerings: http://www.juniper.net/customers/support/
•Search for known bugs: http://www2.juniper.net/kb/
•Find product documentation: http://www.juniper.net/techpubs/
•Find solutions and answer questions using our Knowledge Base: http://kb.juniper.net/
•Download the latest versions of software and review release notes:
http://www.juniper.net/customers/csc/software/
•Search technical bulletins for relevant hardware and software notifications:
https://www.juniper.net/alerts/
Copyright © 2012, Juniper Networks, Inc.xii
AX411 Access Point Hardware Guide
•Join and participate in the Juniper Networks Community Forum:
http://www.juniper.net/company/communities/
•Open a case online in the CSC Case Manager: http://www.juniper.net/cm/
To verify service entitlement by product serial number, use our Serial Number Entitlement
(SNE) Tool located at https://tools.juniper.net/SerialNumberEntitlementSearch/.
Opening a Case with JTAC
You can open a case with JTAC on the Web or by telephone.
•Use the Case Manager tool in the CSC at http://www.juniper.net/cm/ .
•Call 1-888-314-JTAC (1-888-314-5822 toll-free in the USA, Canada, and Mexico).
For international or direct-dial options in countries without toll-free numbers, visit us at
http://www.juniper.net/support/requesting-support.html.
xiiiCopyright © 2012, Juniper Networks, Inc.
About This Guide
Copyright © 2012, Juniper Networks, Inc.xiv
AX411 Access Point Hardware Guide
PART 1
AX411 Access Point Overview
•Introduction to the AX411 Access Point on page 3
•AX411 Access Point Components and Features on page 9
1Copyright © 2012, Juniper Networks, Inc.
Copyright © 2012, Juniper Networks, Inc.2
AX411 Access Point Hardware Guide
CHAPTER 1
Introduction to the AX411 Access Point
This section includes the following topics:
•AX411 Access Point Description on page 3
•Deploying WLANs with AX411 Access Points on page 4
•AX411 Access Point Physical Specifications on page 6
AX411 Access Point Description
The Juniper Networks AX411 Access Point provides network access for wireless clients
such as laptop or desktop computers, personal digital assistants (PDAs), and any other
device equipped with a Wi-Fi adapter. The AX411 Access Point supports the new IEEE
802.11n wireless networking standard with backward compatibility for the IEEE 802.11a/b/g
standards.
Figure 1 on page 3 shows the AX411 Access Point.
Figure 1: AX411 Access Point
g033100
The AX411 Access Point is managed by a services gateway in the SRX200 line (SRX210,
SRX220, or SRX240) or an SRX650 Services Gateway. You manage and configure access
points through the command-line interface (CLI) and J-Web interface of the services
gateway.
3Copyright © 2012, Juniper Networks, Inc.
You can connect and use up to two access points on the services gateway without
obtaining access point licenses. To use more than two access points, you must obtain
an additional access point license (SKU AX411-2) and install it on the services gateway.
You obtain access point licenses from your Juniper Networks representative or reseller.
Table 3 on page 4 shows the maximum number of access points supported for each
applicable services gateway type.
Table 3: Maximum Number of Access Points per Services Gateway Type
Maximum Number of AX411 Access Points SupportedServices Gateway Type
4SRX210
2SRX220
4SRX240
4SRX650
NOTE: If you have previously deployed a greater number of access points
per services gateway than specified in Table 3 on page 4, we recommend
that when practical you reduce the number of access points to those specified.
If you want to deploy more than four access points, we recommend that you
use Juniper Networks WLA Series Wireless LAN access points and WLC Series
Wireless LAN Controllers.
Related
Documentation
Deploying WLANs with AX411 Access Points on page 4•
•AX411 Access Point Physical Specifications on page 6
•AX411 Access Point Front Panel and LEDs on page 9
•AX411 Access Point Rear Panel on page 10
Deploying WLANs with AX411 Access Points
To deploy a wireless network with AX411 Access Points, you install one or more access
points throughout your site and connect them to Ethernet ports on the services gateway
that manages the access points. You can provide power to the access points using Power
over Ethernet (PoE) by connecting them to services gateway ports that have PoE
capability. You can also provide power to the access points using either optional external
power supplies or PoE adapters.
You can connect the access points either directly to the SRX Series device or to a Layer
2 switch that is connected to the SRX Series device.
Figure 2 on page 5 shows a typical WLAN deployment in which four AX411 Access Points
are connected directly to an SRX210 Services Gateway.
Copyright © 2012, Juniper Networks, Inc.4
AX411 Access Point Hardware Guide
Figure 2: Typical WLAN Deployment
Inte rne t
g033104
Figure 3 on page 5 shows a WLAN deployment in which four AX411 Access Points are
connected to an EX4200 Ethernet switch that is connected to an SRX210 Services
Gateway.
Figure 3: WLAN Deployment Using an Ethernet Switch
Inte rne t
g033107
5Copyright © 2012, Juniper Networks, Inc.
Chapter 1: Introduction to the AX411 Access Point
Related
Documentation
AX411 Access Point Description on page 3•
•AX411 Access Point Physical Specifications on page 6
•AX411 Access Point Front Panel and LEDs on page 9
•AX411 Access Point Rear Panel on page 10
AX411 Access Point Physical Specifications
Table 4 on page 6 lists the physical specifications of the AX411 Access Point.
Table 4: AX411 Access Point Specifications
ValueSpecification
•1.75 in. (44.4 mm) excluding antennas
•5.9 in. (150 mm) with supplied antennas
Height
9.5 in. (241 mm)Width
•6.3 in. (160 mm) excluding antennas
•7.4 in. (188 mm) with supplied antennas
Depth
2.33 lb (1.05 kg) with supplied antennasWeight
No performance degradation up to 10,000 ft (3048
m)
Altitude
Normal operation ensured in temperature range of
32°F (0°C) to 122°F (50°C)
Nonoperating storage temperature in shipping
container: –40°F (–40°C) to 158°F (70°C)
Temperature
12.4 watts (1.03 amps at 12 VDC) from optional power
supply or 12.4 watts from PoE
Maximum input power
42.3 BTUMaximum thermal output
NOTE: These specifications are
estimates and subject to change.
70 dB(A) or less per EN ISO 7779Noise level
CAUTION: Before removing or installing components of a functioning access
point, attach an electrostatic discharge (ESD) strap to an ESD point and
place the other end of the strap around your bare wrist. Failure to use an ESD
strap could result in damage to the access point.
Copyright © 2012, Juniper Networks, Inc.6
AX411 Access Point Hardware Guide
Table of contents
