Kangaroo Kabinets Tasmanian K9106 User manual

200712
Height Adjustable Table
Congratulations on the purchase of your new Kangaroo Kabi-
nets product. Every effort has been taken to ensure your
complete satisfaction with this custom designed product.
For your convenience it is supplied in three ready to
assemble cartons.
Helpful Assembly Hints
Read the instructions carefully before starting. Check to see
that all parts are included. Work in a spacious area
preferably on a carpet or soft surface. You will need a
Metric allen wrench set for the assembly(see last page for pic-
ture of allen set). Make sure you tighten all screws and bolts
securely.
Warranty Information
Kangaroo Kabinets warrants this product to be free from faulty
parts or workmanship for a period of 5 years from the date of
shipment from our facility. The warranty covers manufacturer’s
defects and a 15-day warranty for any shipping damages.
The warranty does not cover freight charges for any defects
noticed after the first year of use. Kangaroo will replace parts
for manufacturers defects, but freight for these parts will be the
responsibility of the customer requesting parts after the first
year of ownership.
Under the terms of this warranty the repair or replacement of
any parts shall be at the discretion of the company or their
designated representatives. The warranty does not cover dam-
aged caused by abuse, alteration, accident or neglect. The
warranty does not cover damage caused as result of moving
the table when it is fully loaded. Remove your machine from
the table when moving the table or moving the platform.
Replacement Part Shipping Policy: To help protect our valu-
able resources, we ship all replacement parts out at the same
time. This procedure lessens the use of packaging materials
and fossil fuel used in transportation in order to reduce pollu-
tion. Please help us in this endeavour by reviewing ALL parts
in ALL boxes for damage before calling or e-mailing us to re-
port damage. We adhere to our environmental philosophy by
only shipping replacement parts out 1 time for free within the
first year of ownership. Future parts request will be billed at the
customer’s expense.
Questions? Call us at 1-800-533-7347 press 1
E-Mail: [e-mail]
Check out our website for assembly videos, pictures
and frequently asked questions
www.kangarookabinets.com
Tasmanian Height Adjustable Table
Model #K9106
Assembly Instructions
1. Leg — sub assemblies
2. Support Frame — sub assembly
3. Locate support frame onto the underside of top panel
4. Fix support frame to top panel with bolt and washers

200712
Tasmanian Height Adjustable Table Assembly
8. Place handle onto rod
Line up grub screw with slot on rod and tighten
9. Height of platform is adjusted using wing nut or moving screw
10. We suggest applying silicon spray or WD40 into hole to lubricate
winding mechanism for a smooth action.
(Close up support frame and top panel assembly)
5. Slide leg into the support frame bracket
Slide hexagonal rod into hexagonal insert on leg
Locate 4 holes on leg flange with support bracket
(see close up below) leg with 2 silver rods at end is closets to lift
Another view of the leg and support frame assembly
7. Add washer & screw castor into leg and tighten using spanner.
6.To install the cross bar you must remove the 2 bolts that
are already in the leg at the top. You have been supplied
with 2 longer bolts to allow you to install the cross bar
onto the leg.

200712
Tasmanian Height Adjustable Table Assembly
From step 6 another view of
how it will look when it is in-
stalled.
If required you can spray a silicon spray or
WD-40 into the hole to help your table move
smoothly up and down. This is only required
if over time the table begins to make noises
as it moves up and down.
How to use the Mechanism in your new table:
1. This table offers 2 positions on its sewing surface. To
move the platform down into the sewing well, press firmly
down on the handle release. Press gently down on the wood
platform as it sinks into place.
2. To move the platform back up to the flush position, pull
the handle all the way forward listening for the handle to hit
the wood top surface.
3. Never move the platform with your sewing machine on
the platform. Always remove the machine as you move
the platform up and down.
To adjust the height of the platform in the second position
creating a flush surface:
1. Move the platform down into the sewing well as demon-
strated in step 1 above.
2. Place your machine in the well. If your machine’s sew-
ing surface (the area on your machine where your machine’s
foot rests) is sitting below the edge of the table you will need
to raise the platform. If your sewing surface is sitting above
the edge of the table you will need to lower the platform.
a. To lower platform: Remove your machine from the
platform and pull the handle forward to lock the platform in
the top position.
b. Begin to tighten the bolt on the Eye-Hook located at the
end of the chain under the top surface, until you achieve the
proper height for your sewing machine. You may need to
adjust this position several times before finding the correct
position for your bolt.
c. To raise platform: Perform the same steps as above in a
& b, but instead of tightening the bolt loosen the bolt
If after completing the above steps your sewing machine’s
sewing surface is still not flush you may need to shorten the
chain by moving the screw.
Metric Allen Wrench Set will be
needed to assemble the table