EN
KBSOUND®Select & Space BT User Manual
FCC ID: 2AB6X52791
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired operation.
FCC Caution:
Changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement:
“This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.”
RSS-Gen & RSS-210 statement:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
RSS-102 Statement:
This equipment complies with Industry Canada radiation exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme à l’exposition aux rayonnements Industry Canada limites établies pour un environnement non contrôlé.
1. Basic Components
2. KBSOUND BT App Installation
2.1 iOS Devices
2.2 ANDROID Devices
3. Bluetooth Pairing and Connection
3.1 iO S
3.2 ANDROID
4. Open KBSOUND BT App
5. Listen FM
6. Listen Bluetooth Audio Streaming
7. Ideal Mode
8. Settings
8.1 Power Master and/or Slaves
8.2 Auto-power ON (start-up mode)
8.3 Keep the FM ON
6
8
8
8
8
9
10
11
12
13
14
15
16
17
19
20
23
25
25
25
26
27
28
29
30
31
32
9. Multi-Room: Bluetooth Naming
10. Multi-User
11. Operating Mode
11.1 Master validation
11.2 Bluetooth connection
11.3 Clear the pairing
11.4 Volume
11.5 Notifications and phone calls
while operating
11.6 Reset to factory defaults
12. Slaves Option
13. Technical Specifications
14. FAQ’s
