KEHUA TECH iStoragE B5-S1 User manual

iStoragE B5-S1
User Manual

i
Copyright © Xiamen Kehua Digital Energy Tech Co., Ltd. 2023. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Xiamen Kehua Digital Energy Tech Co., Ltd
Trademarks and Permissions
and other Kehua trademarks are the licensed trademarks of Xiamen Kehua Digital Energy
Tech Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Kehua and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specification in the contract, all
statements, information, and recommendations in this document are provided “AS IS” without warranties,
guarantees or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
XIAMEN KEHUA DIGITAL ENERGY TECH CO., LTD.
Address: Room 208-38, Hengye Building, No. 100 Xiangxing Road, Torch High-tech
Zone (Xiang'an) Industrial Zone, Xiamen, China
Website: www.kehua.com
E-mail: [email protected]
Customer Service Telephone: [phone]
Tel: [phone]
Fax: [phone]

Foreword
iStoragE B5-S1
User Manual
ii
Foreword
Summaries
Thank you for choosing the iStoragE B5-S1 series (hereinafter referred to as iStoragE B5-S1 )!
This document gives a description of the iStoragE B5-S1, including the features, performance,
appearance, structure, working principles, installation, operation and maintenance. etc.
Please save the manual after reading, in order to consult in the future.
The figures in this manual are just for reference, for details please see the actual product.
Suitable Model
iStoragE B5-S1
Single battery is iStoragE B5-S1, two batteries is iStoragE B10-S1, and so on. The energy storage
system iStoragE1 series install up to eight batteries. For special illustration, the following take iStoragE
B5-S1asanexample.
Symbol Conventions
The manual quotes the safety symbols, these symbols used to prompt users to comply with safety
matters during installation, operation and maintenance. Safety symbol meaning as follows.
Symbol Description
Alerts you to a high risk hazard that will, if not avoided, result in
serious injury or death.
Alerts you to a medium low risk hazard that could, if not avoided,
result in moderate or minor injury.
Alerts you to a low risk hazard that could, if not avoided, result in
minor injury.
Anti-static prompting.

iStoragE B5-S1
User Manual Foreword
iii
Symbol Description
Be care electric shock prompting.
Provides a tip that may help you solve a problem or save time.
Provides additional information to emphasize or supplement
important points in the main text.

Contents
iStoragE B5-S1
User Manual
iv
Contents
1 Safety Description ........................................................................................................................ 1
1.1 Safety Announcements ...................................................................................................................................... 1
1.1.1 Use Announcements .................................................................................................................................1
1.1.2 Symbol Illustration ...................................................................................................................................3
1.1.3 ESD Protection .........................................................................................................................................4
1.1.4 Grounding Requirements ......................................................................................................................... 4
1.1.5 Moisture-proof Protection ........................................................................................................................4
1.1.6 Safety Warning Label Setting .................................................................................................................. 5
1.1.7 Electrical Connection...............................................................................................................................5
1.1.8 Measurement Under Operation ................................................................................................................5
1.2 Safety Precaution for Battery Pack ................................................................................................................... 6
1.2.1 General Safety Precautions ...................................................................................................................... 6
1.2.2 Response to Emergency Situations .......................................................................................................... 6
1.3 Requirements for Operator ................................................................................................................................7
1.4 Environment Requirements ...............................................................................................................................8
2 Overview ........................................................................................................................................ 9
2.1 Product Intro ......................................................................................................................................................9
2.1.1 Model Meaning...................................................................................................................................... 10
2.2 Appearance and Structure ................................................................................................................................10
2.2.1 Appearance.............................................................................................................................................10
2.2.2 Size .........................................................................................................................................................10
2.2.3 LED Signals ........................................................................................................................................... 11
2.2.4 Structure Layout Illustration .................................................................................................................. 11
3 Installation ................................................................................................................................... 12

iStoragE B5-S1
User Manual Contents
v
3.1 Installation Process..........................................................................................................................................12
3.2 Installation Preparation....................................................................................................................................13
3.2.1 Tools .......................................................................................................................................................13
3.2.2 Installation Environment ........................................................................................................................14
3.2.3 Installation Space ................................................................................................................................... 14
3.3 Transportation and Unpacking........................................................................................................................ 15
3.3.1 Transportation ........................................................................................................................................ 15
3.3.2 Unpacking and Checking....................................................................................................................... 15
3.4 Mechanical Installation ................................................................................................................................... 16
3.5 Components Requirement ............................................................................................................................... 24
3.6 Communication Port Connection .................................................................................................................... 25
3.7 Multiple Battery Connection........................................................................................................................... 26
3.8 Side Cover Plate Installation ........................................................................................................................... 27
3.9 Check the Installation ......................................................................................................................................28
3.10 Startup/Shutdown Procedure .........................................................................................................................28
4 Maintenance and Troubleshooting ......................................................................................... 30
4.1 Maintenance.................................................................................................................................................... 30
4.2 Troubleshooting...............................................................................................................................................31
5 Package, Transportation and Storage ......................................................................................37
5.1 Package............................................................................................................................................................37
5.2 Transportation ..................................................................................................................................................37
5.3 Storage.............................................................................................................................................................37
A Technical Specifications ...........................................................................................................39
B Acronyms and Abbreviations .................................................................................................. 41

iStoragE B5-S1
User Manual 1 Safety Description
1
1 Safety Description
This chapter mainly introduces the safety announcements. Prior to performing any work on the
device, please read the user manual carefully, follow the operation and installation instructions and
observe all danger, warning and safety information.
1.1 Safety Announcements
Before operation, please read the announcements and operation instructions in this section carefully
to avoid accident.
The promptings in the user manual, such as "Danger", "Warning", "Caution", etc. don't include all
safety announcements. They are just only the supplement of safety announcements when operation.
Any device damage caused by violating the general safety operation requirements or safety standards
of design, production, and usage will be out of Kehua's guarantee range.
1.1.1 Use Announcements
Don't touch terminals or conductors that connected with grid to avoid lethal risk!

1 Safety Description
iStoragE B5-S1
User Manual
2
There is no operational part inside the battery pack. Please do not open the crust of the battery pack
by yourself, or it may cause electric shock. The battery pack damage caused by illegal operation is
out of the guarantee range.
Damaged device or device fault may cause electric shock or fire!
Before operation, please check if the battery pack is damaged or has other danger.
Check if the external device or circuit connection is safe.
Before checking or maintenance, if the DC side and AC side is power down just now, it is necessary
to wait for 5 minutes to ensure the inner device is completely discharged, and then the operation can
be performed.
The surface temperature of the battery pack may reach to 60℃. During running, please don't touch
the surface to avoid scald.
No liquid or other objects are allowed to enter the battery pack, or, it may cause the battery pack
damage.

iStoragE B5-S1
User Manual 1 Safety Description
3
In case fire, please use dry power fire extinguisher. If using liquid fire extinguisher, it may cause
electric shock.
1.1.2 Symbol Illustration
Table1-1 Inverter symbol illustration
Symbol Illustration
Beware of a danger zone
This symbol indicates that the product must be additionally grounded if additional
grounding or equipotential bonding is required at the installation site.
Beware of electrical voltage
The product operates at high voltages.
WEEE designation
Do not dispose of the product together with the household waste but in
accordance with the disposal regulations for electronic waste applicable at the
installation site.
Observe the documentation.
CE marking
The product complies with the requirements of the applicable EU directives.
Danger to life due to high voltages in the inverter, observe a waiting time of 5
minutes.
High voltages that can cause lethal electric shocks are present in the live
components of the inverter.
Prior to performing any work on the inverter, disconnect it from all voltage
sources as described in this document.

1 Safety Description
iStoragE B5-S1
User Manual
4
Symbol Illustration
Beware of hot surface
The product can get hot during operation.
1.1.3 ESD Protection
To prevent human electrostatic damaging sensitive components (such as circuit board), make sure
that you wear a anti-static wrist strap before touching sensitive components, and the other end is well
grounded.
1.1.4 Grounding Requirements
High leakage risk! The battery pack must be grounded before wiring. The grounding terminal must
be connected to ground, or, there will be the risk of electric shock when touching the battery pack.
When installing, the battery pack must be grounded first. When dismantling, the grounding wire
must be removed at last.
Don't damage the grounding conductor.
The device must be connected to protection grounding permanently.
Before operation, check the electrical connection to ensure the battery pack is grounded reliably.
1.1.5 Moisture-proof Protection
Moisture incursion may cause the battery pack damage!
Observe the following items to ensure the battery pack works normally.
When the air humidity is more than 95%, don't open the door of the battery pack.
In the wet or damp weather, don't open the door of the battery pack to maintain or repair.

iStoragE B5-S1
User Manual 1 Safety Description
5
1.1.6 Safety Warning Label Setting
In order to avoid accident for unwanted person gets close to the battery pack or makes improper
operation, observe the following requirements while installing, maintaining or repairing.
Set warning marks where the switches are to avoid switching them on improperly.
Set warning signs or safety warning belt in the operation area, which is to avoid human injury or
device damage.
When the port of battery pack is not in use, please don't remove the corresponding waterproof
cover.
1.1.7 Electrical Connection
Electrical connection must be performed according to the description in the user manual and the
electrical schematic diagram.
Grid-tied generation should be allowed by the local power supply department and the related
operation should be performed by professionals.
All electrical connection must meet the related country and district standard.
1.1.8 Measurement Under Operation
There exists high voltage in the device. If touching device accidently, it may cause electric shock. So,
when perform measurement under operation, it must take protection measure (such as wear insulated
gloves, etc.)
The measuring device must meet the following requirements:
The range and operation requirements of measuring device meets the site requirements.
The connections for measuring device should be correct and standard to avoid arcing.

1 Safety Description
iStoragE B5-S1
User Manual
6
1.2 Safety Precaution for Battery Pack
1.2.1 General Safety Precautions
Overvoltage or wrong wiring can damage the battery pack and cause deflagration, which can be
extremely dangerous.
All types of breakdown of the battery may lead to a leakage of electrolyte or flammable gas.
Battery pack is not user serviceable. High voltage is present in the device.
Read the label with Warning Symbols and Precautions, which is on the right side of the battery
pack.
Do not connect any AC conductors or PV conductors which should be only connected to the
inverter directly to the battery pack.
Do not charge or discharge the damaged battery.
Do not damage the battery pack in such ways as dropping, deforming, impacting, cutting or
penetrating with a sharp object. It may cause a leakage of electrolyte or fire.
Do not expose battery to open flame.
1.2.2 Response to Emergency Situations
The battery pack consists of multiple batteries to form a high-voltage system, if it fails, there is a
high-voltage risk. Kehua company cannot guarantee the absolute safety of the battery pack, so you
need to pay attention to the following matters:
1. If a user happens to be exposed to internal materials of the battery cell due to damage on
the outer casing, the following actions are recommended.
Inhalation: Leave the contaminated area immediately and seek medical attention.
Eye contact: Rinse eyes with running water for 15 minutes and seek medical attention.
Contact with skin: Wash the contacted area with soap thoroughly and seek medical attention.
Ingestion: Induce vomiting and seek medical attention.
2. If a fire breaks out in the place where the battery pack is installed, perform the following
countermeasures.
Fire extinguishing media
Respirator is not required during normal operations. Use FM-200 or CO2extinguisher for battery fire.
Use an ABC fire extinguisher, if the fire is not from battery and not spread to it yet.

iStoragE B5-S1
User Manual 1 Safety Description
7
Fire fighting instructions
−If fire occurs when charging batteries, if it is safe to do so, disconnect the battery
pack circuit switch to shut off the power to charge.
−If the battery pack is not on fire yet, extinguish the fire before the battery pack
catches fire.
−If the battery pack is on fire, do not try to extinguish but evacuate people
immediately.
Effective ways to deal with accidents
−On land: Place damaged battery into a segregated place and call local fire department
or service engineer.
−In water: Stay out of the water and don't touch anything if any part of the battery, or
wiring is submerged. Do not use submerged battery again and contact the service engineer.
1.3 Requirements for Operator
The operation and wiring for iStoragE B5-S1 should be performed by qualified person, which is to
ensure that the electrical connection meets the related standards.
The professional technicist must meet the following requirements:
Be trained strictly and understand all safety announcements and master correct operations.
Fully familiar with the structure and working principle of the whole system.
Know well about the related standards of local country and district.

1 Safety Description
iStoragE B5-S1
User Manual
8
1.4 Environment Requirements
Avoid the iStoragE B5-S1 suffering directly sunshine, rain or snow to prolong the service life (detail
please see 3.2.2 Installation Environment). If the installation environment does not meet the
requirement, the guarantee time may be influenced.
The used environment may influence the service life and reliability of the iStoragE B5-S1. So, please
avoid using the battery pack in the following environment for a long time.
The place where beyond the specification (operating temperature:-10℃~50℃, relative humidity:
0%-95%).
The place where has vibration or easy impacted.
The place where has dust, corrosive material, salty or flammable gas.
The place where without good ventilation or closed.

iStoragE B5-S1
User Manual 2Overview
9
2 Overview
This chapter mainly introduces the device features, appearance, operating mode, etc.
2.1 Product Intro
With energy storage system iStoragE1 series, it is possible to effectively manage energy in users’
home day and night. This energy storage system will provide a complete energy solution with
multiple working modes which meet different application scenarios. It will bring independence and
economy for energy use.
Figure2-1 Energy storage system

2Overview
iStoragE B5-S1
User Manual
10
2.1.1 Model Meaning
Battery
Figure2-2 Model meaning of battery
2.2 Appearance and Structure
2.2.1 Appearance
Figure2-3 Appearance of the battery
2.2.2 Size
Figure2-4 Battery size（Unit: mm）

iStoragE B5-S1
User Manual 2Overview
11
2.2.3 LED Signals
Table2-1 Illustration of the battery LED
LED display Status Illustration
Blue indicator on Battery pack is running.
Flickers in blue and
red alternately Battery pack is running and with secondary alarm.
Flickers in blue Battery pack standby or off.
Flickers in red Battery pack standby or off, and with secondary alarm.
Red indicator on Battery pack abnormal and with important alarm.
Off Battery pack is power off.
2.2.4 Structure Layout Illustration
Figure2-5 Battery structure layout illustration
Table2-2 Battery terminals illustration
NO. Mark Illustration NO. Mark Illustration
①Grounding terminal ④COM Battery communication port
②BATT.
+
Battery port ⑤\Breather valve
-
③POWER Battery ON/OFF button - - -

3 Installation
iStoragE B5-S1
User Manual
12
3 Installation
This chapter introduces the installation of the device, including installation process, installation
preparation, transportation and unpacking, installation procedure, electrical connection and checking,
etc.
3.1 Installation Process
Start
Install battery pack
Electrical connection
Check the installation
End
Installation preparation
Figure3-1 Installation process