Kenmore Sears 15115 User manual

KenITIO re Model: 15115
Warning:Beforeoperating dishwasher,readimportantsafetyinstructionsin the AutomaticDishwashingGuide
Selector Buttons Control Knob Si alLight
Starting Your Dishwasher
1o Load the dishwasher and add detergent. Use fresh granular 2. Close the door but do not latch,
automatic dishwashing detergent for best results, 3,, Follow specific cycle selection directions listed below,,
.... Foroo_maii'ysoiled
dishes° Select Hot Dry
Normal Wash for drier dishes.
Hot Dry Cycle Time:
Approx, 74 minutes
Water Usage:
Approx, 12,,5gallons
..... "For normail'y soiled
dishes, Setect Cool Dry
Normal Wash tosaveenergy°
Cool Dry Cycle Time:
Approx,, 74 minutes
Water Usage:
Approx,. 12_5 gallons
,Push Reset Options
to clear priorselec-
tions,
• Push Normal Wash
button,
•Turn control knob to
Normal Wash
•Push Reset Options
to clear prior selec-
tions.
.Push Normal Wash
button.
•Push Coot Dry button,
•Turn control knob to
Normal Wash,
All cycles start with pre-draino
mi
wiR
AI
H_ S
E
W
A
H
_R- RiD
NNY
S S
E E
0
F
F
Light Wash
Hot Dry
Light Wash
Cool Dry
For pre-rinsed or lightly
soiled dishes. Select
Hot Dry for drier dishes.
Cycle Time:
Approx., 60 minutes
Water Usage:
Approx., 7.5 gallons
For normally soiled
dishes, Select Cool Dry
to save energy,
Cycle Time:
Approx., 60 minutes
Water Usage:
Approx,, 75 gallons
•Push Reset Options
to clear prior selec-
tions
•Turn control knob to
Light Wash.
•Push Reset Options
to clear prior selec-
tions
•Push Cool Dry button,,
°Turn control knob to
Light Wash
Wl
AI
Sl
HI
m __
R R
I, I Ri
N_N _Yi_
ss !
E_E
0
F
F
RinseHold
Cool Dry
For rinsing dishes that
will be washed later.
Use Cool Dry only., Do
not use detergent,
Cycle Time:
Approx 15 minutes
Water Usage:
Approx. 50 gallons
•Push Reset Options
to clear priorselec-
tions,
•Push Normal Wash
button.
•Push Cool Dry button
•Turn control knob to
Rinse Hold,
R R !0
IIF
N_N F
S S
E E
4. Turn on the hot water faucet nearest the dishwasher to clear
cool water from the water pipe, then turn faucet off.
5.. Latch dishwasher door,
Note: The "ON" light gtows while the dishwasher is operating,, tf
the light doesn't come on when you latch the door, make sure the
control knob has been advanced far enough,, Motor sounds will be
heard before water enters the dishwasher,
154095601B

Beforeoperatingyourdishwasher
Please read you Automatic Dishwashing Guide, it
contains important safety information for the safety
of those operating your dishwasher. It also contains
many suggestions for obtaining the best results from
you dishwasher.
What you dishwasher needs to do its job
-Water temperature should be 140°F(60°C)_
= Water pressure should be between 15 and 120
pounds per square inch.
o Fresh granular detergent for automatic dish-
washers.
• Proper connections to water and electricity.
° Rinse agent dispenser filled to reduce spotting
and speed drying.
Loading the dishwasher
Proper loading contributes to good washing results_
See you Automatic Dishwashing Guide for complete
instructions and loading examples.
° Remove loose food from dishware.
• When loading dishware into the rack, remember
the following:
Load plastic items ("Dishwasher Safe") in upper
rack only_
- Place glasses in rows between prongs not over'
prongs_
- Silverware should be loaded so pieces do not
nest together or protrude through openings in
the basket°
- Dishes should not interfere with turning or
extending parts of the spray system_
- Load with soiled surfaces facing inward,,
-Items should be placed so water can drain
freely.
How to add a dish during a cycle
1_ To be certain the added item is washed and
rinsed, make sure there is a full wash cycle yet to
be completed.
2o Unlatch the door to stop the cycle. Wait for the
water action to stop.
3. Open the door and add the dish.
4. Close and latch the door. The cycle will resume
automatically.
Remember, it is normal...
=For a small amount of water to remain in the
bottom of the tub°
°To hear some sounds while your dishwasher is
running:
-The fill valve opening or closing
- Water entering the dishwasher
- Timer clicking as it advances
-Water being pumped out during drain
-Detergent cup opening
- Pump motor starting
-Double drain at the end of last rinse
Before you call for service
Please check the Common Dishwashing Problems
and Solutions section of your Automatic Dishwashing
Guide,, It lists many minor operating problerns and
solutions you can correct yourselL
NORMAL WASH Cycle
Fill detergent cups #1 and #& Rotate lid counterclock_
wise° Fill detergent cups #2 and #4. Cups #1 and #3
should be covered
LIGHT WASH Cycle
Fill detergent cups #1 and #3° Rotate lid counterclock_
wise° Cups #1 and #3 should be covered,.