KENT Wall Mountable Air Purifier manual 

Marketed by:
A-2, Sector-59, Noida, U.P.-201 309, India
Ph.: [phone]
E-mail: [e-mail], Website: www.kent.co.in
KENT RO SYSTEMS LTD.
Manufactured by:
KENT RO SYSTEMS LTD.
Unit-2, Khasra No. 93, Village- Bantakhedi
Tehsil-Roorkee, District-Haridwar,
Uttarakhand - 247668, India
Instruction Hand Book
for Installation, Operation
and Maintenance.
Kent Ozone Air Purifier
Wall-Mountable
D:\Lnk_Ranju_2012\Oct_2012\KENT_Oct_2012\Manual\KENT Air Purier Manual\KENT Air Purier Manual Size: 5.5”×8.25” dt. 12 10 12 job no. 644

Welcome
to KENT
Dear Customer,
Welcome to the world of KENT, the leading brand in the water purication
industry in India. With a KENT product you have all the reasons to smile as at KENT
we take pride in the quality and laboratory-tested performance of our products.
We are condent that your decision to own KENT Wall-Mountable Air Purier will
go a long way in serving you with puried, fresh & detoxied air - thus keeping you
and your family in good health. We assure that you will be satised with its trouble-
free performance and quality.
This manual is an eort towards acquainting you with the operation and mainte-
nance of KENT Wall-Mountable Air Purier. Read this manual carefully before
using the product and keep it for future reference. To enjoy the benets of
warranty, ll up the enclosed warranty card and send the installation report within 15
days of purchase. For further assistance contact your nearest KENT dealer or branch.
Best Wishes,
Kent RO Systems Ltd.
Table of Contents
1. Air Pollution: An Evil Taxing the Modern Life 1
2. The KENT Wall-Mountable Air Purier: The Solution 1
3. Benets of KENT Wall-Mountable Air Purier 1
4. Salient Features of the KENT Wall-Mountable Air Purier 1
5. KENT Ozone Technology 2
6. What is Ozone? 2
7. The Benets of Ozone 2
8. Ozone – as recommended by W.H.O? 3
9. Electrical Specications 3
10. Items in the box 4
11. Usage 4
12. Installation Guidelines 4
13. Operational Instructions 5
14. Maintenance 7
15. Cautions 7
16. Troubleshooting 7
17. Warranty 8

Air Pollution: An Evil Taxing the Modern Life
Kent Wall-Mountable Air Purifier: The Solution
1 2
The air pollution also known as atmospheric pollution has become a complex issue to deal
with. It has been defined by W.H.O (World Health Organisation) as the presence of harmful
materials in excessive concentration which adversely affect the living beings and natural
environment. Large scale industrial, automobile and volcanic emissions (of fumes) are the
major factors responsible for this pollution. Some other factors degrading the air quality are
virus, bacteria and micro organisms. This is the reason why many people in the cities today
are developing cardiovascular & lung diseases.
The Kent Wall Mountable Air Purifier is a solution made to enhance the quality of your life
by making the surroundings ethereal. After being turned on, it quickly emancipates the
room’s atmosphere from harmful bacteria, pathogens, micro organisms, viruses, smoke,
chemicals, etc. This is a custom made gadget which guards its user from harmful and
highly contagious airborne diseases i.e. SARS, H1N1, etc. It occupies just L400 X W100
X H200mm of space and uses a power socket for executing the air purification operations
in a room. It discharges the powerful ozone gas for eradicating all forms of the air pollution
in the room.
KENT Ozone Technology
KENT Wall-Mountable Air purifier uses ozone gas to purify the air in your immediate
environment. Ozone gas is known to have an exceptional power to remove germs, chemical
and other pathogens. It is a resourceful oxidising agent with inherent competence to
exterminate bacteria, viruses and micro organisms from the air with precision.
What is Ozone?
Ozone is defined by the chemical formula of O
3
- a tri-atomic molecule holding three oxygen
atoms. It was German-Swiss Chemist, Christian Friedrich Schönbein who proposed ozone
as a new chemical substance after the Greek word ozein in 1840 – and the formula O
3
was
determined for it in the year 1865. In nature, Ozone is formed because of the exogenic
pressure of ultraviolet rays and atmospheric electrical discharges on dioxygen. This
powerful oxidant is abundantly present in the Earth’s atmosphere. The stratosphere (at 10
to 50km altitude) of the Earth's atmosphere holds the Ozone layer in low concentrations.
Here, it absorbs 97 to 99% of the Sun's ultraviolet rays and prevents them from entering the
earth's surface. On Earth's surface it can be found in abundance near seashores and
forests.
Sadly, air pollution is quickly depleting the ozone level in atmosphere. This is the reason,
why it is difficult to find ozone in metropolitan cities. The depletion of ozone layer has made
it imperative for us to find alternative sources of ozone.
Benefits of Ozone
Ozone possesses strong oxidative properties which are 1.5 times more effective than
chlorine in eliminating harmful colon bacillus, staphylococcus, flu viruses, bacteria, etc. The
countries with technical competence are already using it for medical & commercial
purposes. Europe was the first continent to benefit from the advantages of ozone generator
used on medical water disposure.
The concept of using oxygen and ozone for therapies has been prevalent since the late
nineteenth century. In 1856, many European hospitals started using ozone for disinfecting
the operating rooms. After few years, Ozone became a part of the water purification process
in Germany.
Benefits of KENT Wall-Mountable Air Purifier
• Deodorizes: This device rapidly neutralizes the stale or foul odour, making the
room environment fresh.
• Healthy: It oxidizes and decomposes formaldehyde for enhancing the user’s health.
• Disinfect: Efficiently eliminates bacteria from the room’s atmosphere
Salient Features of the KENT Wall-Mountable Air Purifier
Dr. J. A. Fontaine was the first person to use pure oxygen in 1879 for treating his patients.
The German Doctor, Albert Wolff made some more spectacular revelations in 1915 and
used ozone for treating the skin diseases. During World War I, ozone played a vital damage
control role in the German camp by healing wounds and anaerobic infections of the soldiers.
By 1950, ozone established a strong reputation for curing cancer and many other diseases
like tumour. Since 1990, many doctors have been using the ozone therapy in different ways
for curing patients.
• Performs fully automated air purification operations.
• Discharges the powerful ozone to purify air.
• Enables user to regulate the ozone discharge level.
• Removes harmful bacteria, pathogens, micro organisms,
viruses, smoke, chemicals, etc. from the room’s atmosphere.
• Programmed with three cycle modes and timing modes.
• Cost effective and easy to use ozonator.
• Easy to clean mechanism.

3
Electrical Specifications
MODEL
Voltage
KENT Wall Mountable Air Purifier
DC 12V/ 1000mA
Rated Power Dissipation 9.6W
Ozone Output: 150 mg/h
Airflow 2.8 Km/h
Size L 400 X W 100 X H 200mm
Weight 1210g
Condition Temperature 0
0
C ~ 40
0
C
Accessory Adapter OUT/DC … 12V
4
Dr. J. A. Fontaine was the first person to use pure oxygen in 1879 for treating his patients.
The German Doctor, Albert Wolff made some more spectacular revelations in 1915 and
used ozone for treating the skin diseases. During World War I, ozone played a vital damage
control role in the German camp by healing wounds and anaerobic infections of the soldiers.
By 1950, ozone established a strong reputation for curing cancer and many other diseases
like tumour. Since 1990, many doctors have been using the ozone therapy in different ways
for curing patients.
Ozone – as Recommended by W.H.O?
A very popular research report of W.H.O (World Health Organisation) has revealed that it is
safe to use ozone concentration level up to 0.6 ppm. In such a controlled environment,
ozone harmlessly removes smell (of cigarette, decaying rodents, paint, urine, etc.),
unpleasant odours from the room and increases human metabolism.
AC - DC Adapter Specifications
Input : 140 – 300 VAC
Frequency : 47 – 53Hz
Output : 12V DC, 1000mA, 9.6 Watts
Caution
• Use only genuine & Kent certified adaptor for the device.
• If the adapter is damaged then purchase it from Kent or its authorised dealer.
Usage
• For removing the stale & foul smells from a room use the device for at least 30 minutes.
• Mount the device at a high place as Ozone is heavier than air.
• Please set the operating function before leaving the house everyday.
• Do not use the device in an airtight room for a long period.
***Items in the Box***
~ The Kent Wall Mountable Air Purifier
~ Manual
~ Warranty Card
~ Locating Sticker
~ One Set of Plastic Wall Insert
~ One Set of Screw
~ Adapter
~ Remote
~ One Set of Pencil Cell
~ Filter mesh
Installation Guidelines
1. Select an appropriate position for the device.
2. Place the hanging board locating sticker on the wall – where the device needs to be mounted.
3. Drill holes as per the space provided in sticker.
4. Now, insert the puff up (screw) bolt and screw the hanging board on wall.
5. Place the device on hanging board hangers and ensure that it is in a balanced position.
6. Now, the device is ready to use.
Note: If the wall is not straight or the screws are not properly drilled in an even position, the
device might shake and produce strange sounds. In such a situation, place a rubber pad
between the device and wall.
Note: Keep the device away from heat or direct sunlight.
Wall Hanging Diagram
1. 2. 3. 5.
4.

5 6
[1.] Once the Power Socket is inserted into the
Power Source, the Red, Green & Yellow LED
lights blink simultaneously for three times which
indicates that the devise is ready to use.
[2.] Cycle Mode Settings:
I.) High Cycle Mode
Press the Power Switch, then the Red LED Light
flashes to indicate that the device has been set in
the High Cycle Mode. In this mode, the fan & the
ozone generator start their operations
simultaneously. For the first 3 minutes, the ozone
generator produces ozone and the fan dissipates
it. In the 4th minute, the ozone generator stops
functioning but the fan continues dissipation. For
the next 6 minutes both the ozone and fan stop
their operations and go into a dormant stage. This
process maintains the PPM level in a room. The
cycle repeats itself till the Power On/ Off button is
pressed again.
II.) Medium Cycle Mode
For changing the High Cycle Mode into the
Medium Cycle Mode press the Cycle Mode
Button (on timer). After this the Green LED Light
indicates that the High Cycle Mode has been
changed to Medium Cycle Mode. In this mode,
the fan & the ozone generator start their
operations simultaneously. For the first 2
minutes, the ozone generator produces ozone
and the fan dissipates it. In the 3rd minute, the
ozone generator stops functioning but the fan
continues dissipation. For the next 7 minutes both
the ozone and the fan stop their operations and
go into a dormant stage. This process maintains
the PPM level in a room. The cycle repeats itself
till the Power On/ Off button is pressed again.
III.) Low Cycle Mode
For changing the Medium Cycle Mode into the
Low Cycle Mode press the Cycle mode button
twice. Then the Yellow LED light flashes to
indicate that the Low Cycle Mode has been
activated. In this mode, the fan & the Ozone
Generator start their operations simultaneously.
For 1 minute, the ozone generator produces
ozone and the fan dissipates it. In the 2nd minute,
the ozone generator stops functioning but the fan
continues dissipation. For the next 8 minutes both
the ozone and the fan stop their operations and
go into a dormant stage. This process maintains
the PPM level in a room. The cycle repeats itself
till the Power On/ Off button is pressed again.
IV.) The Cycle Mode settings can be changed
anytime after pressing the ON Timer button.
3.] Timing Mode Settings
I.) Timing Mode: High Cycle
Turn on the device by pressing the Power Switch.
Now press the Timing Mode Button (Off Timer)
once. The HI Mode Red LED Light and OZ LED
Light would blink continuously to indicate that the
device has been timed in the High Mode. The
device in this mode can continue operations for 6
hours.
II.) Timing Mode: Medium Cycle
Press the Timing Mode Button (off timer) twice.
Then the Medium Mode Green LED and the OZ
LED lights would blink continuously to indicate
that the device has been timed in the Medium
Mode. This Timer Mode runs the device
automatically for 3 hours.
III.) Timing Mode: Low Cycle
Press the Timing Mode button (Off Timer) thrice.
After this, the Low Mode Yellow LED and OZ LED
Lights would blink for indicating that the device
has timed in the Low Mode. This Timer Mode
runs the device automatically for 1 hour.
IV.) The Timing Mode settings can be changed
anytime by pressing the OFF Timer button.
* NOTES:
• The device registers the recently used settings
before turning off.
• When a user turns the device on, it uses the
most recently used settings – which can be
changed by the user as per the requirement.
Operational Instructions
KENT Ozone Air Purier
(Wall-Mountable)
ON/OFF SWITCH
CONTINUOUS OPERATING SWITCH
TIMING CONTROL SWITCH
REMOTE CONTROL
POWER SOCKET
SIDE
OZONE OUTLET
POWER SWITCH
CONTINUOUS OPERATING SWITCH
TIMING CONTROL SWITCH
FUNCTION LIGHTS
FRONT

7
Maintenance
• The inner filter of the device must be cleaned with a soft brush or vacuum cleaner after
every 2 weeks or 184 hours of operation.
• Do not wash the device with water or any other chemical solution.
Caution
• The device is not water resistant please do not immerse it in water.
• Clean the device with a soft & dry cloth at regular intervals. Do not use any chemical
solution for cleaning the device.
• Replace the adapter or remote when it is out of order. Buy the adapter or remote from Kent
or its authorised dealer only.
• Do not try to repair the device on your own, call our Service Engineer.
• Do not encourage any child or a person with weak heart to maintain or clean the device.
• Do not forget to unplug the device while maintaining or cleaning it.
• Keep the device out of the reach of children.
• Consult your physician before trying any of the ozone therapy methods.
Troubleshooting
NO.
1.
2.
3.
Reason & Troubleshooting
• Replace the adaptor or remote when it is out of
order. Buy the adaptor or remote from Kent or its
authorised distributor/dealer only.
• If the device is being used in upright method, then
it should be kept at a 5mm distance from the wall.
• Drill the screws (on the wall) in an even position, If
it is not possible then place a rubber pad between
the device and wall.
• Ensure that the adapter has been properly
connected to the power socket, and the on/off switch
has been pressed properly.
Breakdown
The Adaptor/Remote has
malfunctioned
Amplitude vibration and
loud noise
The LED Lights are not
flashing and the device is
not functioning