
TABLE OF CONTENTS CONTINUED
7.3 Using the Mesh in Open Mesh 51
7.3.1 C hannel Setting (Default: channel 1) 51
7.4 Using Mesh in Group Mesh 53
7.4.1 Creating a Group Mesh 53
7.4.2 Joining an Existing Group Mesh 55
7.5 Reset Mesh 56
7.6 Toggling Open Mesh/Group Mesh 57
7.7 Enable/Disable Mic (Default: Enable) 58
8. BLUETOOTH INTERCOM SETUP 59
8.1 Intercom Pairing 59
8.2 Two-Way Intercom 62
8.3 Multi-Way Intercom 63
8.3.1 Starting a Three-Way Intercom Conference 63
8.3.2 Starting a Four-Way Intercom Conference 65
8.3.3 Ending Multi-Way Intercom 66
8.4 Three-Way Conference Phone Call with
Intercom Users 66
8.5 Group Intercom 68
8.6 Mesh Intercom Conference with Bluetooth
Intercom Participant 69
8.7 Universal Intercom 71
8.8 VOX Intercom (Default: Disable) 74
8.9 Intercom VOX Sensitivity (Default: 3) 75
8.10 HD Intercom (Default: Enable) 75
8.11 Advanced Noise Control™ (Default: Enable) 75
9. AUDIO MULTITASKING 76
9.1 Audio Multitasking Settings 76
9.2
Intercom-Audio Overlay Sensitivity (Default: 3)
77
9.3 Audio Overlay Volume Management
(Default: Disable) 77