Names and functions of parts
1MAIN POWER key
Switch the unit ON mode.
2ON/STANDBY key
Switch the unit between ON mode and
STANDBY mode.
3Standby indicator
Lights up to indicate that a small amount
of current flows in the unit.
4PATTERN key
Press to enter or quit the genre mode.
5TAPE indicator
Lights up when the TAPE key is pressed
to ON.
6PAUSE key
Press to let an equalizer curve pause
temporarily.
7WIDE/NARROW key
Each press of the key switches the curve
slope alternately between WIDE and
NARROW.
8GRAPHIC/PARAMETRIC key
GRAPHIC: Select this mode when adjust
ing an equalizer curve.
PARAMETRIC: Select this mode when
creating an equalizer curve according to
center frequencies.
90EQ. LEVEL (UP)
/ (DOWN) keys
Press the (up) or (down) key to increase
or decrease the equalizer level.
!EQ. EFFECT key
Press to turn the equalizer mode ON and
OFF.
@TAPE key
Use when playing back or recording a
tape.
#DISPLAY key
Press to switch the display mode or to
select the demonstration mode.
$REVERSE key
Press to reverse an equalizer curve.
%FLAT key
Press to make an equalizer curve flat.
^MANU./REF. key
Press to switch the manual and reference
functions alternately.
&Preset keys (1 to 5)
Typical equalizer patterns have been
preset under these keys so that you can
select any one of them easily.
*MEMORY key
Press this key when registering a user-
created equalizer pattern.
(Genre keys
Press in the genre mode to select the
desired music genres and their equalizer
patterns.
)Frequency keys (F1, F2, F3)
Each key can store a desired center
frequency.
¡FREQUENCY JOG knob
Rotate the control knob to adjust the fre
quency band (range).
Indicators
EQ. ON GRAPHIC
MEMORY PARAMETRIC
MANUAL F1, F2, F3
REFERENCE WIDE/NARROW
Graphic equalizer display
Spectrum analyzer display
Character display
Character display
Frequency display
indicator
Display
G-EQ3001P~.INT(CIR 97.11.278:19PM y[W 3
