KEYLESS KES-180 User manual

Page 1of 6
Installation Guide
(KES-180/280)

Page 2of 6
Adjust the handle direction
1. Check the door opening direction and adjust the lock handle
direction as well as the mortise direction.
Fitting Template
2. Find the appropriate height position and place the fitting
template on the door edge, then drill the mortise hole according to
the template.

Page 3of 6
3. Drill holes on both sides of the door according to the template.
4. Install the mortise and cylinder.

Page 4of 6
5. Place the spindle into the front handle and attach the split pin. The
pin must be split and curved after being pushed through the hole.
Note: the spindle direction must be the same as the handle direction.
(The arrow indicates a mark towards the handle)

Page 5of 6
6. Assemble the rubber on both lock panels.
7. Mount the lock panel and connect the cable

Page 6of 6
8. Load battery and check the lock setting as per the user manual.
9. Check Mechanical Keys.
The key is a backup. Ensure the key turns freely, and then always keep in
safe place.