KGuard Security QRT-301 User manual

QRT-301
User's Manual
Day & Night
WI-FI Network Camera
Web Client user name: admin
Web Client default password: admin
P2P user name: admin
P2P default password: 123456

2
WI-FI Network Camera User’s Manual
Introducon
Features..................................................4
Package Contents ...................................4
Product Overview...................................5
Connecon Diagram...............................6
Making Connecon
Network Conguraon...........................7
Wireless Router ...................................7
Wireless Router With WPS
Funcon ...........................................7
Wireless Router Without WPS
Funcon ...........................................8
Wired Router/Modem .......................11
DHCP...............................................11
Stac IP and PPPoE.........................13
Connect to Camera...............................17
Using a Portable Device .....................17
Using a PC ..........................................20
Install Camera.......................................21
Before Installaon..............................21
Installaon Procedures ......................21
Fixed Mounng...............................21
Dynamical Mounng ......................21
Web Client
Log In .................................................22
Main Screen.......................................23
Task Bar..............................................24
Right Panel Control ............................25
Congure the Camera Sengs ..........26
Device.............................................27
Video ..............................................27
Audio ..............................................28
Moon Detecon ...........................28
Alarm..............................................29
Network..........................................30
Wireless Lan ...................................32
UPNP ..............................................32
DDNS ..............................................33
Cruise..............................................33
Indicator .........................................34
Users...............................................34
Log..................................................35
Date & Time....................................36
E-mail(SMTP) ..................................36
FTP..................................................37
SD Card...........................................38
P2P Sengs....................................39
Local Sengs..................................39
System ............................................40
Playback .............................................41
Searching and Playing Videos.........41
Appendix
Specicaons........................................43
Web Client Browser Compability .......44
Contents

WI-FI Network Camera User’s Manual
3
Safety Informaon
Warning
This is the symbol for indicang any potenal hazard,
risk or condion requiring special aenon.
The user needs to refer to the important operang
and maintenance or servicing instrucons.
Cauon
The lighng ash with an arrow head symbol, in an
equilateral triangle, is intended to alert the user.
There is dangerous “voltage” presence near by the
product’s enclosure which may be risk of person.
Safety Precauons
1. Read the user manual carefully before aempng
to install the camera and keep the manual for future
reference.
2. Follow all instrucons.
3. Always keep the glass lens clean to obtain the best
picture quality. Clean only with dry cloth.
4. Do not install near water or heat sources such as
radiators or other apparatus that produce heat.
5. Do not install the camera in places with high humidity.
6. Do not install the camera in places highly exposed to
gas or oil.
7. Do not install the camera in places enclosed by metal.
This may shield the electromagnec waves and cause
signal recepon to fail.
8. Do not touch the camera with wet hands.
9. Do not expose the camera to radioacvity or place
near medical equipment with radio waves.
10. Do not service the camera by yourself. Refer all
servicing to authorized personnel.
11. Always handle the device with care.
Warning
To prevent re or shock, DO NOT expose the unit to rain or
moisture.
Cauon
To reduce the risk of electric shock, DO NOT use other power
cables other than the one supplied.
FCC Compliance Statement
This equipment has been tested and found to comply
with the limits for a Class C digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protecon against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instrucons, may cause harmful
interference to radio communicaons. Operaon of this
equipment in a residenal area is likely to cause harmful
interference in which case the user will be required to
correct the interference at his own expense.
Modicaons not expressly approved by the
manufacturer could void the user’s authority to operate
the equipment under FCC rules.
Copyright
Copyright @All Rights Reserved.
All other trademarks menoned in this manual are
trademarks of their respecve companies.
Limitaon of Liability
• This publicaon is provided “AS IS” without warranty of
any kind, either expressed or implied, including but not
limited to, the implied warranes of merchantability,
tness for any parcular purpose, or non-infringement
of a third party’s rights.
• This publicaon may include technical inaccuracies
or typographical errors. Changes may be made to
the informaon herein, at any me, for publicaon
improvements and/or of the corresponding device(s).
Disclaimer of Warranty
In no event shall the supplier be liable to any party
or any person, except for replacement or reasonable
maintenance of the product, for the cases, including but
not limited to the following:
• Any damage or loss, including but without limitaon,
direct or indirect, special, consequenal or exemplary,
arising out of or relang to the device;
• Personal injury or any damage caused by inappropriate
use or negligent operaon of the user;
• Unauthorized disassemble, repair or modicaon of
the device by the user;
• Any problem, consequenal inconvenience, or loss or
damage, arising out of combining the system with the
devices of a third party;
• Any claim or acon for damages, brought by any
person or organizaon being a photogenic subject, due
to violaon of privacy with the result of pictures from
a surveillance camera, including saved data, for some
reason, becomes public or is used for the purpose
other than for surveillance.
Safety and Regulatory Info

4
WI-FI Network Camera User’s Manual
Thank you for choosing our Wi-Fi Network Camera. The QRT-301 features an easy-to-congure network interface,
allowing you to access the camera on your mobile/pad anywhere at any me.
If you are using a wireless router with the WPS funcon, all you need to do is to pair the router with the camera,
download the Kview QR applicaon on your portable device, scan the QR code to add the camera, and start viewing
the remote live view. The network conguraon can be completed without the use of a computer.
Introduction
2s
DC IN1234 WPS RESET
Internet
WPS
QR
Features
• IEEE 802.11b/g/n 150Mbps Wireless Transmission
• WPA-PSK & WPA2-PSK Wireless Encrypon Support
• 720p (1 Mega pixels) High Quality Recording and Playback Support
• WPS Support
• Standard H.264 Compression For Enabling Smoother Video Images
• Built-in SD Memory Card Slot for up to 32G
Package Contents
The following items come with your package. If any of them is missing or damaged, please contact your retailer.
• Antenna
• Quick Installaon Guide
• Soware & User Manual CD
• Power Adapter
• RJ45 Cables
• Screw Kit
• Bracket
• WPS/Reset Pin Tool
1
2
3
4
5

WI-FI Network Camera User’s Manual
5
Introduction
Product Overview
WiFi Antenna
QR Code Label
Lens
Status LED (red)

6
WI-FI Network Camera User’s Manual
Introduction
Connecon Diagram
LOCK
DC IN1234WPS RESET
Internet
*Pin Tool
Sensor In
Alarm Out
SD Card
Electrical Outlet
Speaker
Microphone
LAN Port
(RJ45)
LAN
WiFi Antenna
WAN
NOTE: The Pin tool can be used to start the WPS funcon (see “Wireless Router With WPS Funcon” on page 7) or
to reset the camera (insert and hold in the reset hole for 15 seconds unl the LAN port LEDs switch o).

WI-FI Network Camera User’s Manual
7
Network Conguraon
Procedures of Network Conguraon depend on the type of Router/Modem you are using.
For Wireless router, check if your wireless router supports WPS funcon.
For Wired router/modem, conrm which type of internet connecon (DHCP, Stac IP and PPPoE) you are using with
your Internet Service Provider (ISP) to complete the setup.
Wireless Router
If you are using a wireless router, check if your router supports WPS funcon before wireless setup.
Wireless Router With WPS Funcon
If your wireless router supports WPS funcon, perform the following to establish a connecon from the camera to the
wireless router. Make sure the WPS funcon on router is acvated rst.
1. Connect the camera to the power socket, using the power adapter.
2. Using a Pin tool, press and hold down the WPS/Reset buon for 2 seconds. The camera’s status LED (red)
starts blinking.
3. On your wireless router, press the WPS funcon key for a minute, to start WPS pairing.
IMPORTANT: For the WPS pairing process, you must press the WPS funcon within 1 minute aer
pressing the WPS/Reset buon in Step 2. However, the step may vary, depending on the wireless router’s
conguraon.
DC IN123
4W
PS RESET
Internet
WPS
Making Connection

8
WI-FI Network Camera User’s Manual
Making Connections
4. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wireless network
connecon is successful.
5. Download KviewQR applicaon and view the live view on your mobile devices. See “Connect to Camera” on
page 16.
Wireless Router Without WPS Funcon
If your wireless router does not support WPS funcon, perform the following to establish a connecon from the
camera to the wireless router:
1. Connect the camera to the power socket, using the power adapter.
2. Connect one end of the RJ45 cable (supplied) to the camera and the other end to the wireless router.
DC IN1234WPS RESET
Internet
3. Make sure your camera and computer are connected to the same router.
DC IN1234WPS RESET
Internet

WI-FI Network Camera User’s Manual
9
Making Connections
4. Insert the CD (supplied) to your PC’s CD drive. Click on Search IP.
5. The program lists the camera by IP address. Double-click on the camera’s IP address eld.
The camera’s web client opens in your PC’s default web browser.
NOTE: The available funcons/menu opons may vary depending on the type of web browser. See “Web
Client Browser Compability” on page 44.
6. Enter the user name and password. NOTE: The default user name and password are “admin”.
7. Click Login.
8. Click and go to the Wireless LAN tab.
9. Click Search to search for wireless router.

10
WI-FI Network Camera User’s Manual
Making Connections
10. Click on the router name and modify the following.
• Check Using Wireless LAN opon.
• Enter the wireless router’s password in Key eld.
11. Click Save.
12. Disconnect the RJ45 Ethernet cable from the camera.
DC IN1234WPS RESET
Internet
13. Disconnect and connect the power adapter, to restart the camera.
14. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wireless network
connecon is successful.
15. Download KviewQR applicaon and view the live view on your mobile devices. See “Connect to Camera” on
page 16.

WI-FI Network Camera User’s Manual
11
Making Connections
Wired Router/Modem
If you are using a wired router/modem, conrm the type of internet connecon you are using and the related network
connecon parameters with your Internet Service Provider (ISP), to complete the setup.
Dynamic Host Conguraon Protocol (DHCP): Select this connecon if your camera is connected to a router and DHCP
is enabled.
Stac IP (Stac Address): Select this connecon if your camera is directly connected to a DSL modem and your ISP has
supplied you with a predened IP for your Internet connecon.
Point-to-Point Protocol over Ethernet (PPPoE): Select this connecon if your camera is directly connected to the DSL
modem, and your ISP has supplied you with an authencaon username and password to the Internet.
DHCP
To establish a connecon from the camera to the wired router using DHCP, perform the following:
1. Connect the camera to the power socket, using the power adapter.
2. Connect one end of the RJ45 cable (supplied) to the camera and the other end to the wired router.
DC IN1234WPS RESET
Internet
3. Make sure your camera and computer are connected to the same router.
DC IN1234WPS RESET
Internet

12
WI-FI Network Camera User’s Manual
Making Connections
4. Insert the CD (supplied) to your PC’s CD drive. Click on Search IP.
5. The program lists the camera by IP address. Double-click on the camera’s IP address eld.
The camera’s web client opens in your PC’s default web browser.
NOTE: The available funcons/menu opons may vary depending on the type of web browser. See “Web
Client Browser Compability” on page 44.
6. Enter the user name and password. The default user name and password are “admin” .
7. Click Login.
8. Disconnect and connect the power adapter, to restart the camera.
9. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wired network connecon
is successful.
10. Download KviewQR applicaon and view the live view on your mobile devices. See “Connect to Camera” on
page 16.

WI-FI Network Camera User’s Manual
13
Making Connections
Stac IP and PPPoE
To establish a connecon from the camera to the wired router or modem with a stac IP or PPPoE, perform the
following:
1. Connect the camera to the power socket, using the power adapter.
2. Connect one end of the RJ45 cable (supplied) to the camera and the other end to the wired router or modem.
DC IN1234WPS RESET
Internet
3. Make sure your camera and computer are connected to the same router or modem.
DC IN1234WPS RESET
Internet
4. Right-click on Network icon ( ) and choose Open Network and Sharing Center on your PC.

14
WI-FI Network Camera User’s Manual
Making Connections
5. On Network and Sharing Center click Local Area Connecon Status > Details and write down the network
parameters (IP Address, Subnet Mask, Gateway, and DNS Servers).
6. Insert the CD (supplied) to your PC’s CD drive. Click on Search IP.
7. The program lists the camera by IP address. Right-click on the camera’s IP address eld and select
Network Conguraon.
8. In Network Conguraon menu, do the following modicaons:
• Uncheck the DHCP Server opon.
• Assign the camera a new IP address by changing the last three digits of the current IP address (0 ~ 255).
• Enter the Subnet Mask, Gateway, and DNS server address that you just wrote down in Step 5.
NOTE: You need to enter the DNS server address if you plan to use the camera’s web client e-mail service
for receiving moon detecon/alarm nocaons. Verify DNS server address with your ISP if you cannot
nd it on Step 5.

WI-FI Network Camera User’s Manual
15
Making Connections
• Enter the user name and password.
NOTE: The default user name and password are “admin”.
9. Click OK.
10. Wait for a minute unl the camera’s IP address is listed on the screen.
11. Double-click on the camera’s IP address eld to open the camera’s web client on your PC’s default web
browser.
12. Enter the user name and password.
NOTE: The default user name and password are “admin”.
13. Click Login.
14. Click and go to the Network tab.

16
WI-FI Network Camera User’s Manual
Making Connections
15. On Network screen, do the following modicaons:
• Depending on the Internet connecon you are using, select Stac Address or PPPoE as the network type.
• Do the necessary modicaons to the network parameters.
16. Click Save.
17. Disconnect and connect the power adapter, to restart the camera.
18. When the red status LED (see “Product Overview” on page 5) turns o, wait for 10 seconds unl the
Camera boots up and starts rotang.
NOTE: When the red status LED starts blinking with a second interval, it means the wired network connecon
is successful.
Connect to Camera

WI-FI Network Camera User’s Manual
17
Making Connections
When the network connecon to the camera is complete, use the methods described in this secon to start reviewing
the remote live view.
P2P user name: admin
P2P default password: 123456
Using a Portable Device
To access remotely your camera from a smart phone/pad, perform the following:
1. Open the App Store (iOS) or Play Store (Android).
2. Search for and install KviewQR applicaon.
iOS Android
3. Open KviewQR applicaon ( ) and tap (iOS) or tap (Android) to add a device.
4. To idenfy the camera, use one of the following opons:
• Use a bar code scanner to idenfy the camera. Do the following:
a. Tap on the bar code ( ) (iOS) or Scan (Android) to open the bar code scanner.
b. Scan the bar code on camera.
NOTE: To scan the bar code, aim your portable device’s camera at the bar code so that the enre bar
code is visible on the screen.
• Manually enter the 20-symbol QR Code (GUID) on the bar code label to the QR ID eld in KviewQR.
NOTE: This QR Code (GUID) can also be found on the camera’s web client: click > P2P Sengs > GUID.

18
WI-FI Network Camera User’s Manual
Making Connections
5. Do the following:
iOS devices:
a) Enter the default camera password: “123456”.
b) Tap OK.
c) Change the device name if necessary.
d) Tap Save.
Android devices:
a) Enter the default camera password: “123456” and change the device name if necessary.

WI-FI Network Camera User’s Manual
19
Making Connections
b) Tap OK.
6. On Devices screen, tap camera to start viewing the live video from the camera.
Using a PC

20
WI-FI Network Camera User’s Manual
Making Connections
To access remotely your camera from a PC, follow the steps:
1. Insert the CD (supplied) to your PC’s CD drive.
2. Click on PC Setup.
3. Follow the on-screen instrucons and install the applicaon on your PC.
4. Double-click to open the KGard_IPCamClient.
5. Enter the user name and password.
NOTE: The default user name and password are “admin”.
6. Click OK.
For more details, please refer to the IPCamClient User Manual in supplied CD.
Install Camera