KGuard Security QRT-502 Instruction manual

QRT-502 connection method
1. Turn on QRT-502 first, then use the paperclip to press the Reset at the back for
about 10 seconds, you will hear the DA ...DA ...DA, after releasing, QRT-502 will
restart and wait for another sound Take the next step
2. After that, hold the paper clip and press Reset New York for 5-7 seconds. At this
time, the QRT-502 light will be on (1.2. Bright), so that QRT-502 enters the AP mode,
and can be accessed from the mobile phone. IPCAM-AP wireless network found
3. Connect to the IPCAM-AP network through the mobile terminal, and then open
KViewCam
4. After adding a new camera, enter the default password: admin, then click the local
network search, you will find WIFICAM, after opening WIFICAM, the camera ID will
appear, click Finish to return to the home page
(You can also use the wireless fast connection to directly scan the QRcode to connect)

5. After pressing (i), click the wireless network setting, then you can help your
machine to choose the home wifi connection. When the connection is successful,

QRT-502 will restart, at this time you can change your network into Home wifi, you
can log in to watch when you enter the KviewCam screen again. After that, if you
have a mobile phone and want to connect, you can click Add Camera and directly
scan the QRcode to connect