
KidCo, Inc., 1013 Technology Way, Libertyville, IL 60048-5349 • www.kidco.com • Phone 1.800.553.5529 • Fax 1.800.553.0221
WARNING
Failure to follow these warnings and the instructions could result in serious injury or death.
• The product, including side rails, must be fully erected prior to use. The product, including the four legs with mesh straps and tube caps,
must be fully assembled prior to use.
• Strings can cause strangulation! Never place items with a string around a child’s neck such as hood strings or pacifier cords.
Never suspend strings over product or attach strings to toys.
• Discontinue use of the product when child is able to climb out or reaches the height of 35 in (890mm).
• Child can become entrapped and die when improvised netting or covers are placed on top of product. Never add such items to confine child in product.
• When child is able to pull to standing position, remove bumper pads, large toys, and other objects that could serve as steps for climbing out.
• Never place product near a window where cords from blinds or drapes can strangle a child.
• Use ONLY mattress/pad provided by manufacturer.
• Always provide the supervision necessary for the continued safety of your child. When used for playing, never leave child unattended.
• To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their back to sleep, unless otherwise advised by your physician.
• Never use this product if there are any loose or missing fasteners, loose joints, broken parts, or torn mesh/fabric. Check before assembly and
periodically during use. Contact KidCo for replacement parts. Never substitute parts.
• Never use plastic shipping bags or other plastic film as mattress covers not sold and intended for that purpose. They can cause suffocation.
• Never use a water mattress with this product.
1.
Unfold main frame until the two center locks
click, indicating it is locked.
2.
Turn frame upside down. Insert leg tube with
spring lock button end first, through corner
fabric sleeve. Press spring lock button and
insert leg into the frame tube, releasing
button into frame hole. Repeat with other
three legs.
3.
Insert plastic caps into bottom ends of tubes.
4.
Turn unit right side up and place mattress
inside play yard with hook and
loop straps on the bottom.
5.
Turn play yard on its side. Locate a button
hole at underside of floor. Slip finger
through button hole and feed hook and
loop strap through. Attach strap to hook
and loop sewn under bottom of floor.
Repeat for other three corners.
TO ASSEMBLE
1
4 5
2 3
1.
Peel apart hook and loop straps from underside of floor.
2.
Remove mattress.
3.
Turn unit upside down and remove plastic caps from
end of leg tubes.
4.
Press spring lock button to remove tube from frame.
Slide leg out of fabric sleeve. Repeat for other leg tubes.
5.
Turn frame right side up and press lock buttons
(located under the fabric facing out) to release
and allow the frame to fold in half.
6.
Fold mattress into a U-shape and place in nylon carry
bag followed by frame and legs.
• Metal frame can be wiped clean with mild soap
and water.
• Fabric can be removed by unzipping around top frame.
Machine wash with cold water on gentle cycle – AIR DRY
TO CLEAN
TO FOLD
1 2 3
4 5 6
If you’re looking for quality home furniture & decoration, visit our website.