Kidco BouncePod PeaPod Plus User manual

User Guide BouncePod
TM
Read all instructions before assembly
and use of the travel bouncer. Keep
all instructions for future use. Do not
use the BouncePod if it is damaged
or broken.
WARNING
FALL HAZARD: Babies have suffered
skull fractures falling while in and
from bouncers.
• Use bouncer ONLY on floor.
• ALWAYS use restraints.
Adjust to fit snugly.
• NEVER lift or carry baby in bouncer.
SUFFOCATION HAZARD: Babies have
suffocated when bouncers tipped over
on soft surfaces.
• NEVER use on a bed, sofa, cushion,
or other soft surface.
• NEVER leave baby unattended.
To prevent falls and suffocation:
• ALWAYS use restraints.
Adjust to fit snugly.
• NEVER use for a child able to
sit up unassisted.
TRAVEL BOUNCER
®
LOOK FOR OTHER GREAT KIDCO TRAVEL PRODUCTS!
PeaPod Plus GoPod
DinePod HuggaPod

BouncePod
INSTRUCTION FOR USE
Unlock the two restraining buckles by pressing in on the release buttons. Move the adjustable harness forward and place
infant on seat. Lift the harness into position on infant’s tummy, locking the left and right side buckles by inserting them
into the harness buckles until you hear them lock. Pull on the loose straps until the harness is snug around the infant. The
BouncePod is recommended for infants up to 6 months of age.
PACKING TO GO
Reverse the process described
above placing the headrest and
frame in the seat and rolling up
before inserting into the carry bag.
CARE AND
MAINTENANCE All fabric
parts are machine washable. Dry
thoroughly.
IMPORTANT
Check all tube connections
and pocket insertions to
assure the BouncePod is
stable and safe.
SET UP
Remove BouncePod from bag and begin
assembly process on a level floor.
12
34
As each of the steel tubes
are attached by stretch
cords, simply insert them
all the way into their
respective holders until
you hear a slight “click”
which indicates they are
locked in place.
Insert the front two
steel tubes (A&B) into
the seat cover pockets
located underneath
the seat.
Position the headrest at the
appropriate height and
insert the hook and loop
straps through the
openings, securing them to
the hook and loop located
on the backside of the seat
cover.
After opening the
hook and loop pockets
located behind the top
of the seat cover,
insert the two steel
tubes (C&D) before
securing the hook and
loop in place
afterwards.
1234
A
B
C
D
CLICK
CLICK
Easy to use adjustable harness
Non-skid rubber feet
Patent pending
Soft adjustable headrest
Netting allows
for air ow
Durable carry bag
Soft, machine
washable fabric
BouncePod
TM
TRAVEL BOUNCER
If you’re looking for quality home furniture & decoration, visit our website.