KidKraft AUSTIN PLAYSET F29085 User manual

# F29085
M
I
S
S
I
N
G
S
O
M
E
T
H
I
N
G
?
•
C
A
L
L
U
S
O
R
G
O
O
N
L
I
N
E
•
INSTALLATION AND OPERATING INSTRUCTIONS
ASSEMBLY TIME
12 - 18 HOURS
TWO-PERSON
ASSEMBLY
WARNING. ONLY
FOR OUTDOOR
DOMESTIC USE
Rev 02/17/20229409085
FOR 24/7 ONLINE PARTS REPLACEMENT
parts.kidkraft.com parts.kidkraft.eu
KidKraft, Inc.
4630 Olin Road
Dallas, Texas 75244
USA
[e-mail] [e-mail]
1.800.933.0771
972.385.0100
[phone]
M-F from 09:00 to 17:30 (GMT+1)
KidKraft Netherlands BV
Olympisch Stadion 8
1076 DE Amsterdam
The Netherlands
To reduce the risk of serious injury or death, please read and follow
these instructions. Keep and refer to instructions as needed and
pass along to any future owners of this item.
WARNING
AUSTIN PLAYSET
8.33m
9.13m
5.13m
3.26m
29′ 1-5/8"
8.88m
16′10-3/7”
5.15m
10′ 5-5/8"
3.19m
27′4"
8.33m
OBSTACLE FREE SAFETY ZONE - 29' 1-5/8″ x 27′ 4″ (8.88m x 8.33m) area requires
Protective Surfacing. See page 4.
MAXIMUM VERTICAL FALL HEIGHT - 7’ 8” (2.34m)
CAPACITY - 9 Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (50 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools,
churches, nurseries, day cares or parks.

Congratulations on purchasing
a KidKraft product!
Our items are made of high-quality,
durable Cunninghamia Lanceolata wood
from the cypress family.
Lumber from these trees are known for
their light weight and excellent strength.
The porosity of this wood allows the
moisture to absorb and evaporate in the
fibers, resisting rot and bugs.
Engineered for great play, our products
also go through extensive testing for safety.
Plus, our team has developed a series of
proprietary methods for a simpler, more
organized assembly. Less build time and
more play time is our motto!
However, during assembly if you have any
questions or concerns, please reach out.
Our Customer Service can help with missing
parts, instructions or maintenance.
2

3
Warnings and Safe Play Instructions
CONTINUOUS ADULT SUPERVISION REQUIRED. Most serious injuries and deaths on playground equipment have occurred
while children were unsupervised! Our products are designed to meet mandatory and voluntary safety standards. Complying
with all warnings and recommendations in these instructions will reduce the risk of serious or fatal injury to children using
this play system. Go over the warnings and safe play instructions regularly with your children and make certain that they
understand and follow them. Remember on-site adult supervision is required for children of all ages.
SERIOUS HEAD INJURY HAZARD
Installation over concrete, asphalt, dirt, grass, carpet
and other hard surface creates a risk of serious injury
or death from falls to the ground. Install and maintain
shock absorbing material under and around play-set as
recommended on page 3 of these instructions.
COLLISION HAZARD
Place play-set on level ground at least 2m from any
obstruction such as a garage or house, fences, poles,
trees, sidewalks, walls, landscape timbers, rocks,
pavement, planters, garden borders, overhanging
branches, laundry lines, and electrical wires. (See
OBSTACLE FREE SAFETY ZONE on cover)
CHOKING HAZARD/SHARP EDGES & POINTS
Adult assembly required. This product contains small
parts and parts with sharp edges and points. Keep parts
away from children until fully assembled.
WARNING LABEL
Owners shall be responsible for maintaining the legibility
of the warning labels.
STRANGULATION HAZARD
,senilsehtolc,seporhtiwyalpotnerdlihcwollaREVEN•
pet leashes, cables, chains or cord-like items when using
this play-set or to attach these items to play-set.
ponchos, hoods, scarves, capes, necklaces, items with
draw-strings, cords or ties when using this play-set.
stemlehtropsroekibraewotnerdlihcwollaREVEN•
when using this play-set.
Failure to prohibit these items, even helmets with chin
straps, increases the risk of serious injury and death to
children from entanglement and strangulation.
TIP OVER HAZARD
Choose a level location for the equipment. This can reduce
the likelihood of the play set tipping over and loose-fill
surfacing materials washing away during heavy rains.
D
Never add extra length to chain or rope. The chains or ropes
provided are the maximum length designed for the swinging
element(s).
O NOT allow children to play on the play-set until the
assembly is complete and the unit is properly anchored.
WARNING
eeS.tes-yalpruoyfosnoitatimilyticapacevresbO
front cover.
gnisolcnetoofllufdnagnittfillewhtiwnerdlihcsserD
footwear.
retnecehtnithgiewllufriehthtiwtisotnerdlihchcaeT
of the swing seat to prevent erratic swing motion or
falling off.
,gnissim;doowdekcarcronekorb,deretnilpsrofkcehC
loose, or sharp edged hardware. Replace, tighten and or
sand smooth as required prior to playing.
niahc,sreddalepor,seporgnibmilcdednepsustahtyfireV
or cable are secured at both ends and cannot be looped
back on itself as to create an entanglement hazard.
rehtodnaedilsehtkcehc,syadtohrodnaynnusnO
plastic rides to assure that they are not very hot as to
cause burns. Cool hot slide and rides with water and wipe
dry prior to using.
raewtoofleehroeotneporaewotnerdlihcwollatonoD
like sandals, flip–flops or clogs.
dniheb,neewteb,tnorfni,klawotnerdlihcwollatonoD
or close to moving rides.
poolroseporrosniahcgniwstsiwtnerdlihcteltonoD
them over the top support bar. This may reduce the
strength of the chain or rope and cause premature failure.
.noitomnierayehtelihwsedirffotegnerdlihcteltonoD
.tewsitinehwtnempiuqenognibmilctimreptonoD
anitnempiuqefoesuroyalphguortimreptonoD
manner for which it was not intended. Standing on or
jumping from the roof, elevated platforms, swings,
climbers, ladders or slide can be dangerous.
.staesrosedirytpmegniwsotnerdlihcwollatonoD
rotsrfidaehedilsnwodogotnerdlihcwollatonoD
run up slide.
WARNING – Safe Play Instructions
Orientate slide such that it gets the least amount of exposure
to the sun.

4
One of the most important things you can do to reduce the likelihood of serious head injuries is to install shock-absorbing
protective surfacing under and around your play equipment. The protective surfacing should be applied to a depth that is suitable
for the equipment height in accordance with ASTM F1292. There are different types of surfacing to choose from; whichever
product you select, follow these guidelines:
Loose-Fill Materials
• Maintain a minimum depth of 9 inches of loose-fill materials such as wood mulch/chips, engineered wood fiber (EWF), or
shredded/recycled rubber mulch for equipment up to 8 feet high; and 9 inches of sand or pea gravel for equipment up to 5 feet
high. NOTE: An initial fill level of 12 inches will compress to about a 9-inch depth of surfacing over time. The surfacing will also
compact, displace, and settle, and should be periodically raked and refilled to maintain at least a 9-inch depth.
• Use a minimum of 6 inches of protective surfacing for play equipment less than 4 feet in height. If maintained properly, this
should be adequate. (At depths less than 6 inches, the protective material is too easily displaced or compacted.)
NOTE: Do not install home playground equipment over concrete, asphalt, or any other hard surface. A fall onto a hard surface
can result in serious injury to the equipment user. Grass and dirt are not considered protective surfacing because wear and
environmental factors can reduce their shock absorbing effectiveness. Carpeting and thin mats are not adequate protective
surfacing. Ground level equipment -- such as a sandbox, activity wall, playhouse or other equipment that has no elevated play
surface -- does not need any protective surfacing.
• Use containment, such as digging out around the perimeter and/or lining the perimeter with landscape edging. Don’t forget to
account for water drainage.
• Periodically rake, check and maintain the depth of the loose-fill surfacing material. Marking the correct depth on the play
equipment support posts will help you to see when the material has settled and needs to be raked and or replenished. Be sure to
rake and evenly redistribute the surfacing in heavily used areas.
• Do not install loose fill surfacing over hard surfaces such as concrete or asphalt.
Poured-In-Place Surfaces or Pre-Manufactured Rubber Tiles
You may be interested in using surfacing other than loose-fill materials - like rubber tiles or poured-in-place surfaces.
• Installations of these surfaces generally require a professional and are not “do-it yourself ” projects.
• Review surface specifications before purchasing this type of surfacing. Ask the installer/manufacturer for a report showing that
the product has been tested to the following safety standard: ASTM F1292 Standard Specification for Impact Attenuation of Surfacing
Materials within the Use Zone of Playground Equipment. This report should show the specific height for which the surface is intended
to protect against serious head injury. This height should be equal to or greater than the fall height - vertical distance between a
designated play surface (elevated surface for standing, sitting, or climbing) and the protective surfacing below - of your play equipment.
• Check the protective surfacing frequently for wear.
Placement
Proper placement and maintenance of protective surfacing is essential. Refer to diagram on front cover. Be sure to;
• Extend surfacing at least 6 feet from the equipment in all directions.
• For to-fro swings, extend protective surfacing in front of and behind the swing to a distance equal to twice the height of the top
bar from which the swing is suspended.
• For tire swings, extend surfacing in a circle whose radius is equal to the height of the suspending chain or rope, plus 6 feet in all directions.
Protective Surfacing - Reducing Risk of Serious Head Injury From Falls
From the CPSC Outdoor Home Playground Safety Handbook. At http://www.playgroundregs.com/resources/CPSC%20324.pdf
Denotes Use Zone with Protective Surfacing
Denotes Use Zone with Protective Surfacing
6 ft.
6 ft. 6 ft.
6 ft.
6 ft. 6 ft.
6 ft.
Use Zone for Multi-Axis SwingsUse Zone for Single-Axis Swings

5
Instructions for Proper Maintenance
sand and repaint using a non-lead paint
splinteringof wood.
Check for sharp edges or protrudingscrew threads, add
washers if required.
fill protective surfacing materials to prevent compaction and
Check for looseness, damage ordeterioration. Should firmly
if necessary.
Check that bolts are secure and tight. Quick clips should be
completely closed and threaded clips screwed tight.
parts including swingseats, ropes, chains and attachments
Check that ropes are tight, secure at both ends and cannot
loop back as to create an entrapment.
Check all wood members fordeterioration, structural
damage and splintering. Sand down splinters and replace
deteriorated wood members. As with all wood, some
checking and small cracks in grain is normal.
basis is important maintenance to maintain maximum life
and performance oftheproduct.
Check the following at the beginning of the play season:
This will causesplinteringof wood.
Check for sharp edges orprotrudingscrew threads.
Add washers ifrequired.
materials to prevent compaction and maintain appropriate
Check twice a month during play season:
Check that they are secure and orientated correctly. Hook
should rotate freely and perpendicular to support beam.
Check swingseats, all ropes, chains and attachments for
fraying, wear, excessive corrosion ordamage.
Check once a month during play season:
To prolongtheir life, remove swings and store insidewhen
plasticparts may become morebrittle.
materials to prevent compaction and maintain appropriate
Check at the end of the play season:
If you disposeof your play set:
hazards at thetime it is discarded. Besure to follow yourlocal wasteordinances.
beyond T-Nut
flat washer
Your KidKraft Play System is designed and constructed of quality materials with your child’s safety in mind. As with
all outdoor products used by children, it will weather and wear. To maximize the enjoyment, safety and life of your
Play Set, it is important that you, the owner, properly maintain it.

6
About Our Wood
KidKraft Premium Play Systems uses only premium playset lumber, ensuring the safest product for your
children’s use. Although we take great care in selecting the best quality lumber available, wood is still a
product of nature and susceptible to weathering which can change the appearance of your set.
What causes weathering? Does it affect the strength of my Play System?
One of the main reasons for weathering is the effects of water (moisture); the moisture content of the wood
at the surface is different than the interior of the wood. As the climate changes, moisture moves in or out
of the wood, causing tension which can result in checking and or warping. You can expect the following
due to weathering. These changes will not affect the strength of the product:
1. Checking is surface cracks in the wood along the grain. A post (4” x 4”) will experience more checking
than a board (1” x 4”) because the surface and interior moisture content will vary more widely than in
thinner wood.
2. Warping results from any distortion (twisting, cupping) from the original plane of the board and often
happens from rapid wetting and drying of the wood.
3. Fading happens as a natural change in the wood color as it is exposed to sun-light and will turn a grey
over time.
How can I reduce the amount of weathering to my Play System?
At the factory we have coated the wood with a water repellent or stain. This coating decreases the amount
of water absorption during rain or snow thus decreasing the tension in the wood. Sunlight will break down
the coating, so we recommend applying a water repellent or stain on a yearly basis (see your local stain
and paint supplier for a recommended product).
Most weathering is just the normal result of nature and will not affect safe play and enjoyment for your
child. However if you are concerned that a part has experienced a severe weathering problem please call
our consumer relations department for further assistance.
Complete and mail registration card to receive important product notifications and assure prompt
warranty service.

7
KidKraft Limited Warranty
MISSING OR DAMAGED PARTS:
KidKraft will replace any parts within 90 days from date of purchase found to be missing from or
damaged in the original packaging. See Fig.1
Fig. 1 Product Age (All Parts) Consumer Pays
0-90 Days from date of purchase $0 for Part + Free Shipping
DEFECTS IN MATERIAL AND WORKMANSHIP:
KidKraft warrants that this product is free from defects in materials and workmanship for a period of one
(1) year from the original date of purchase (dated sales receipt and/or product registration is required).
This one (1) year warranty covers all parts including wood, hardware, and all accessories (Such as
swings, rides, and slides). See Fig. 2
Fig. 2 Product Age (All Parts) Consumer Pays
91 Days to 1 Year $0 for Part + Free Shipping
WOOD ROT, DECAY, AND INSECT DAMAGE:
All wood carries a five (5) year warranty against rot, decay, and insect damage (dated sales receipt
and/or product registration is required). Refer tothe schedule below for charges associated with
replacement of wood parts under this Limited Warranty. See Fig. 3
Fig. 3 Product Age (Wood Parts) Consumer Pays
0 Days to 1 Year $0 for Part + Free Shipping
After 1 Year to 5 Year $0 for Part + Shipping & Handling
Over 5 Years 100% for Part (if available) + Shipping & Handling
This warranty applies to the original owner and registrant and is non-transferable. Regular maintenance
is required to ensure the integrity of this product. Failure by the owner to maintain the product according
to the maintenance requirements may void this warranty.
This Limited Warranty does NOT cover:
• Any inspection cost
• Labor and/or costs for replacement of any defective item(s), including but not limited to,
professional installer costs
• Incidental or consequential damages, including but not limited to, as a result of set relocation,
move and/or reinstall
• Cosmetic defects which do not affect performance or integrity of a part or the entire product
• Vandalism, improper use or installation, or acts of nature, including but not limited to, high winds,
fire, and flood
• Minor twisting, warping, checking, or any natural occurring properties of wood that do not affect
performance or integrity.
• Any KidKraft product purchased, including but not limited to, a non-approved retailer, auction
houses, second-hand, and as-is clearance items.
KidKraft products have been designed for safety and quality. Modifications made to the original product
may damage the structural integrity of the unit leading to failure and possible injury. KidKraft cannot
assume any responsibility for the modified products. Furthermore, modifications void all warranties.
This product is warranted for RESIDENTIAL USE ONLY. Under no circumstance should a KidKraft
product be used in public settings such as schools, churches, playgrounds, parks, home and
professional day cares and the like. Such use may lead to product failure and potential injury. Public use
will void this warranty. KidKraft disclaims all other representations and warranties of any kind, express or
implied.

8
This identifies information that requires special
attention. Improper assembly could lead to an unsafe
or dangerous condition.
Where this is shown, 2 or 3 people
are required to safely complete the
step. To avoid injury or damage
to the assembly make sure to get
help!
Check that assembly is square
before tightening bolts.
Use a measuring tape to assure
proper location.
Check that set or assembly is properly level
before proceeding.
Pre-drill a pilot hole
before fastening screw
or lag to prevent
splitting of wood.
This indicates time to tighten bolts, but
not too tight! Do not crush the wood.
This may create splinters and cause
structural damage.
Part Identification Key
On each page, you will find the parts
and quantities required to complete the
assembly step illustrated on that page.
Here is a sample.
Key Number: The first two digits
represent the step number. The third
digit represents the piece. Note that if
the part is used in multiple steps then
the number only reflects the first step it
is used in.
Symbols
Throughout these instructions symbols are provided as important reminders for proper and safe assembly.
Proper Hardware Assembly
Lag screws require drilling pilot
holes to avoid splitting wood. Only
a flat washer is required. For ease of
installation liquid soap can be used
on all lag-type screws.
For bolts, tap T-Nut into hole with
hammer. Insert the hex bolt through
lock washer first then flat washer then
hole. Because the assemblies need to
be squared do not completely tighten
until instructed. Pay close attention to
diameter of the bolts. 5/16” is slightly
larger than 1/4”.
Note: Wafer head bolts with blue lock
tight or a bolt with a Ny-Lok nut do
NOT require a lock washer.
Once the assembly is tightened, watch for exposed threads.
If a thread protrudes from the T-Nut, remove
the bolt and add washers to eliminate this condition.
Extra washers have been provided for this purpose.
Use
Help
Use
Help
Measure
Distance
Square
Assembly
Use
Level
Pre-drill 1/8” & 3/16” Bit
Tighten
Bolts
CAUTION – Protrusion Hazard
Keys to Assembly Success
Tools Required
• Tape Measure
• Carpenters Level
• Carpenters Square
• Claw Hammer
• Standard or Cordless Drill
• #1 Phillips, #2 Robertson
and Screwdriver
• Ratchet with extension
(1/2” & 9/16” sockets)
• Open End Wrench
(1/2” & 9/16”)
• Adjustable Wrench
• 1/8” & 3/16” Drill Bits
• 3/16” Hex Key
• 8’ Step Ladder
• Safety Glasses
• Adult Helpers
• Pencil
Quantity Key Number Part Description,
Part Size
2X 012 Post 2 x 4 x 83”
No Yes
Lag Assembly
Bolt Assembly
Flat Washer
Lag Screw
Hex Bolt
Lock
Washer
Flat
Washer
Before mounting Lag
Screw, use factory drilled
holes as guides to drill 1/8”
pilot holes
T-Nut
(Hammer into place)
Do not crush wood!
If Bolt protrudes
beyond T-Nut
Use an extra
flat washer

9
2x - 9755 - 31.8 x 76.2 x 1765.3 mm - 3599755
1-1/4 x 3 x 69-1/2"
2x - 9756 - 31.8 x 63.5 x 1054.1 mm - 3599756
1-1/4 x 2-1/2 x 41-1/2"
4x - 9757 - 31.8 x 76.2 x 920.8 mm - 3599757
1-1/4 x 3 x 36-1/4"
1x - 9758 - 31.8 x 76.2 x 920.8 mm - 3599758
1-1/4 x 3 x 36-1/4"
1-1/4 x 3 x 36-1/4"
1x - 9759 - 31.8 x 76.2 x 920.8 mm - 3599759
1x - 9760 - 31.8 x 76.2 x 1092.4 mm - 3599760
1-1/4 x 3 x 43"
1-1/4 x 3 x 43"
1x - 9761 - 31.8 x 76.2 x 1092.4 mm - 3599761
2x - 9762 - 31.8 x 38.1 x 1054.1 mm - 3599762
1-1/4 x 1-1/2 x 41-1/2"
2x - 9764 - 31.8 x 63.5 x 279.4 mm - 3599764
1-1/4 x 2-1/2 x 11"
1 x 1-3/16 x 11"
4x - 9765 - 25.4 x 30 x 279.4 mm - 3599765
4x - 9769 - 25.4 x 31.8 x 328.2 mm - 3599769
1 x 1-1/4 x 12-15/16"
1-1/4 x 1-1/2 x 27-3/16"
4x - 9770 - 31.8 x 38.1 x 690.2 mm - 3599770
Part Identification (Reduced Part Size) - Box 1
2x - 9774 - 31.8 x 60.3 x 404.8 mm - 3599774
1-1/4 x 2-3/8 x 15-15/16"
1-1/4 x 2-1/2 x 35-11/16"
1x - 9775 - 31.8 x 63.5 x 906.1 mm - 3599775
2x - 9777 - 38.1 x 38.1 x 1154 mm - 3599777
1-1/2 x 1-1/2 x 45-7/16"
1x - 9778 - 31.8 x 76.2 x 1160 mm - 3599778
1-1/4 x 3 x 45-43/64"
2x - 9779 - 31.8 x 76.2 x 381 mm - 3599779
1-1/4 x 3 x 15"
1x - 9781 - 25.4 x 50.8 x 296 mm - 3589781
1 x 2 x 11-5/8"
2x - 9783 - 38.1 x 63.5 x 1320.8 mm - 3589783
1-1/2 x 2-1/2 x 52"
1x - 9785 - 34.9 x 63.5 x 1080.4 mm - 3589785
1-3/8 x 2-1/2 x 42-9/16"

10
1x - 9786 -34.9 x 63.5 x 1080.4 mm - 3589786
2x - 9787 - 31.8 x 50.8 x 480 mm - 3599787
1-1/4 x 2 x 18-7/8"
1-3/8 x 2-1/2 x 42-9/16"
Part Identification (Reduced Part Size) - Box 1
4x - 9788 - 15.9 x 76.2 x 628.7 mm - 3599788
5/8 x 3 x 24-3/4"
5x - 9790 - 15.9 x 76.2 x 910.6 mm - 3599790
5/8 x 3 x 35-7/8"
1x - 9794 - 31.8 x 76.2 x 357.1 mm - 3599794
1-1/4 x 3 x 14-1/16"
1x - 9795 - 15.9 x 76.2 x 736.6 mm - 3599795
5/8 x 3 x 29"
2x - 9798 - 15.9 x 88.9 x 138.1 mm - 3599798
5/8 x 3-1/2 x 5-7/16"
2x - 9799 - 15.9 x 88.9 x 175.8 mm - 3599799
5/8 x 3-1/2 x 6-15/16"
2x - 9800 - 15.9 x 88.9 x 213.6 mm - 3599800
5/8 x 3-1/2 x 8-7/16"
5/8 x 3-1/2 x 9-7/8"
2x - 9801 - 15.9 x 88.9 x 251.3 mm - 3599801
1x - 2606 - 23.8 x 82.6 x 362 mm - 3592606
15/16 x 3-1/4 x 14-1/4"
1x - 2607 - 31.8 x 76.2 x 558.8 mm - 3592607
1-1/4 x 3 x 22"
1x - 9680 - 31.8 x 76.2 x 489 mm - 3599680
1-1/4 x 3 x 19-1/4"
1x - 9831 - 76.2 x 76.2 x 1425.8 mm - 3599831
3 x 3 x 56-1/8"
2x - 9720 - 50.8 x 76.2 x 2063.9 mm - 3599720 2 x 3 x 81-1/4"
1x - 2614 - 76.2 x 133.4 x 2235.2 mm - 3592614 3 x 5-1/4 x 88"
1x - 2616 - 23.8 x 82.6 x 1181.1 mm - 3592616
15/16 x 3-1/4 x 46-1/2"

11
1-1/4 x 26 x 40"
1x - 9304 - 31.8 x 660.4 x 1016mm - 37589304
1-1/4 x 37 x 87"
1x - 9303 - 31.8 x 939.8 x 2209.8mm - 37599303
1-1/4 x 37 x 87"
1x - 9301 - 31.8 x 939.8 x 2209.8mm - 37599301
Part Identification (Reduced Part Size) - Box 1

12
Part Identification (Reduced Part Size) - Box 2
1-1/4 x 2 x 24-3/16"
2x - 9763 - 31.8 x 50.8 x 614.6 mm - 3599763
4x - 9766 - 25.4 x 50.8 x 971.6 mm - 3599766
1 x 2 x 38-1/4"
5/8 x 3 x 33-3/16"
10x - 9767 - 15.9 x 76.2 x 842.5 mm - 3599767
5/8 x 3 x 33-3/16"
1x - 9768 - 15.9 x 76.2 x 842.5 mm - 3599768
20x - 9771 - 15.9 x 114.3 x 906 mm - 3589771
5/8 x 4-1/2 x 35-43/64"
1-1/4 x 2-3/8 x 34-5/16"
3x - 9772 - 31.8 x 60.3 x 872.2 mm - 3599772
1x - 9773 - 31.8 x 114.3 x 906.1 mm - 3599773
1-1/4 x 4-1/2 x 35-11/16"
1x - 9776 - 31.8 x 60.3 x 908 mm - 3599776
1-1/4 x 2-3/8 x 35-3/4"
2x - 9780 - 25.4 x 50.8 x 853.2 mm - 3589780
1 x 2 x 33-9/16"
2x - 9782 - 25.4 x 50.8 x 254 mm - 3589782
1 x 2 x 10"
2x - 9802 - 25.4 x 50.8 x 346.9 mm - 3589802
1 x 2 x 13-11/16"
1x - 9829 - 15.9 x 127 x 736.6 mm - 3589829
2x - 9827 - 15.9 x 127 x 736.6 mm - 3589827
3x - 9784 - 15.9 x 127 x 736.6 mm - 3589784
5/8 x 5 x 29"
5/8 x 5 x 29"
5/8 x 5 x 29"
5/8 x 5 x 29"
1x - 9828 - 15.9 x 127 x 736.6 mm - 3589828

13
Part Identification (Reduced Part Size) - Box 2
1x - 9789 - 15.9 x 88.9 x 906 mm - 3589789
5/8 x 3-1/2 x 35-43/64"
2x - 9791 - 31.8 x 50.8 x 804.7 mm - 3599791
1-1/4 x 2 x 31-11/16"
2x - 9792 - 31.8 x 101.6 x 785.4 mm - 3599792
1-1/4 x 4 x 30-15/16"
1x - 9793 - 31.8 x 82.6 x 912.4 mm - 3599793
1-1/4 x 3-1/4 x 35-15/16"
1x - 9830 - 31.8 x 82.6 x 912.4 mm - 3599830
1-1/4 x 3-1/4 x 35-15/16"
1x - 9796 - 31.8 x 76.2 x 790 mm - 3599796
1-1/4 x 3 x 31-1/8"
1x - 9797 - 15.9 x 88.9 x 1022.4 mm - 3589797
5/8 x 3-1/2 x 40-1/4"
3x - 9571 - 23.80 x 82.60 x 343 mm - 3589571
15/16 x 3-1/4 x 13-1/2"
2x - 9572 - 15.90 x 76.20 x 374.60 mm - 3589572
5/8 x 3 x 14-3/4"

14
1-1/4 x 47 x 87"
1x - 9300 - 31.8 x 1193.8 x 2209.8 - 37599300
1-1/4 x 47 x 87"
1x - 9302 - 31.8 x 1193.8 x 2209.8 - 37599302
Part Identification (Reduced Part Size) - Box 2
1-1/4 x 33-1/8 x 40"
1x - 9305 - 31.8 x 841.4 x 1016mm - 37589305

15
40x LW2 - 5/16" - 51303300
49x TN2 - 5/16"
-
54503300
9x BN1 - 1/4" - 54803200
3x TN1 - 1/4"
-
54503200
12x
LW1 - 1/4" - 51303200
99x FW2 - 5/16" - 51103300
6x FW1 - 1/4" - 51103200
Hardware Identification (Actual Size)
4x S18 -
#6 x 1"
- 52013910
9x FW0 - 3/16" - 51103100
4.8mm
8x - FW6 - #12 - 9299500
3x S10
- #8 x 1" - 52433510
25.4mm
64x LN1 -
1/4 "
- 54303200
6.4mm
24x LN2 - 5/16"
-
54303300
7.9mm
4x S33 - #8 x 1" - 52043510
25.4mm
25.4mm
50.8mm
25.4mm
26x FW3 - #8 - 51003500
7.9mm
6.4mm
6.4mm
7.9mm
-
#12 x 2"
- 52433620
15x
50x
S6
S37
-
#12 x 1"
- 52433610
86x
40x
S0 -
#8 x 7/8"
- 52933505
- #7 x 5/8" - 52433009
6.35 x 25.4mm
11x PB6 -
1/4 x 1"
- 53413210
S7
1x WB9 -
5/16 x 2-1/8"
- 53613324
79x S3 -
#8 x 2-1/2"
- 52043522
34x S4 -
#8 x 3"
- 52043530
261x S20 -
#8 x 1-3/8"
- 52043516
8x S11 -
#8 x 2"
- 52043520
12x S24 -
#10 x 4"
- 52043940
8x -
#8 x 7/8" - 52043505
S41
3x WB7 -
5/16 x 3"
- 53613330
22.2mm
22.2mm
34.9mm
63.5mm
76.2mm
101.6mm
50.8mm
7.9 x 76.2mm
30x WB2 -
5/16 x 1-3/8"
- 53613316
7.9 x 34.9mm
7.9 x 54mm
11x WB10 -
5/16 x 2-5/8"
- 53613329
7.9 x 66.6mm
15.8mm
6.4mm
7.9mm
6.4mm

16
D5
9x - PB2 - 1/4 x 1-1/4 " - 53433212
6.4 x 31.8mm
6.4 x 108mm
6.4 x 19.1mm
54x PB1 -
1/4 x 3/4" - 53413203
Hardware Identification (Actual Size)
34.9mm
2x WL3 - 1/4 x 1-3/8" - 52613216
2x H11 -
1/4 x 2-3/4"
- 53703223
1x H8 -
1/4 x 4-1/4"
- 53703241
7x G21 -
5/16 x 3-3/4"
- 53703333
3x G4 -
5/16 x 4"
- 53703340
22x WL5 -
1/4 x 2-1/2"
- 52613222
63.5mm
14x - G7 -
5/16 x 5-1/2"
- 53703352
7.9 x 139.7mm
7.9 x 101.6mm
7.9 x 44.5mm
7.9 x 95.3mm
6.4 x 69.9mm
4pc.
G27
- 5/16 x 1-3/4" - 53703313
1x -
- 3/16" - 9200022
7.9 x 88.9mm
1 x G11 - 5/16 x 3-1/2" - 53703332

17
1x - 9200015
1x
- 9200131
6x - 3201950
1x - 3200022
(2 pk)
1x - 9200014
1x - 3329085 (6Pk)
1x - 3200143
1x - 9200144
1x - 9200143
1x - 3200145(2pk)
1x - 3200718 (7Pk)
7x - 9290318
1x
- 7310149
1x - 3320255
1x - 3320161
1x
- 3310130
1x
- 3310131
9x - 3310121
1x
- 3310124
1x - 3310132
31x - 54902200
2x - 9200157
1x - 9200156
1x -
53452209
30x -
53453202
1x - 9200158
1X - 9205970
2x
- 9330519
2x - 9320516
2x
- 9330505
1x
- 9200211
1X - 3205941(4pk)
4 X - 9205933
1x - 3759085 (2Pk)
1x
- 3502045
2x
- 9502020
4x
- 9502045
2x - 9320131
1x - 3200155
1x - 3209085
1x
- 3330027
1x
- 9320889
1x
- 3330908
1x
- 9320791
1x
- 3330909
Part Identification (Reduced Part Size)
10x - TNR 4 Clamp Ring
(9300130) (Green)
10pcs number 3300130
1x - 9320374
2x - 9320130
1x
-3320353

18
B. If there are any missing or damaged pieces or you need assistance with
assembly please contact the consumer relations department directly. Call us
before going back to the store.
Key Number: The rst two digits represent the step
number. The third digit represents the piece. Note
that if the part is used in multiple steps then the
number only reects the rst step it is used in.
Quantity Key Number Part Description,
Part Size
2X 012 Post 2 x 4 x 83”
Step 1: Inventory Parts - Read This Before Starting Assembly
• Please refer to Page 8 for proper hardware assembly.
• Each step indicates which bolts and/or screws you will need for assembly, as well as
any at washers, lock washers, t-nuts or lock nuts.
A. This is the time for you to inventory all your hardware, wood and accessories,
referencing the parts identication sheets. This will assist you with your assembly.
• The wood pieces will have the key number stamped on the ends of the boards.
Organize the wood pieces by step, as per the key numbering system below.
BATCH #: __ __ __ __ __ __ __ ___ (Box 4)
BATCH #: __ __ __ __ __ __ __ ___ (Box 5)
BATCH #: __ __ __ __ __ __ __ ___ (Box 6)
BATCH #: __ __ __ __ __ __ __ ___ (Box 1)
BATCH #: __ __ __ __ __ __ __ ___ (Box 2)
BATCH #: __ __ __ __ __ __ __ ___ (Box 3)
MODEL NUMBER: F29085
TRACKING NUMBER (from ID Plaque):
C. Read the assembly manual completely, paying special attention to EN71 and
ASTM warnings; notes; and safety/maintenance information on pages 1 - 8.
D. Before you discard your cartons ll out the form below.
• The Batch # is located on the end of each carton. The tracking number is located on
the KidKraft ID Plaque (9320374).
• Please retain this information for future reference. You will need this information if you
contact the Consumer Relations Department.
Europe Customer Service: [phone]
[email protected]
EU Online Parts Replacement: parts.kidkraft.eu
[email protected]
Online Parts Replacement: parts.kidkraft.com
To warranty your product: kidkraft.com/warranty/
Customer Service:
1(800) 933-0771 or [phone]

19
1 x 31.8 x 1193.8 x 2209.8 mm (1-1/4 x 47 x 87”)
1 x 31.8 x 939.8 x 2209.8 mm (1-1/4 x 37 x 87”)
1 x 31.8 x 1193.8 x 2209.8 mm (1-1/4 x 47 x 87”)
1 x 31.8 x 939.8 x 2209.8 mm (1-1/4 x 37 x 87”)
Step 2
Wood Parts Hardware
9300 9303
9301
9302
16 x 6.4 x 63.5 mm (1/4 x 2-1/2”)
WL5 X 16
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
WL5
9300
9303
9302
9301
WL5
Pre-drill each hole using
a 3/16” drill bit for WL5.

20
Step 3
1 x 23.8 x 82.6 x 362 mm (15/16 x 3-1/4 x 14-1/4”)
1 x 31.8 x 76.2 x 558.8 mm (1-1/4 x 3 x 22”)
Wood Parts Hardware
2606
2607
1 x 6.4 x 63.5 mm (1/4 x 2-1/2”) (FW2)
1 x 7.9 x 54 mm (5/16 x 2-1/8”) (FW2, TN2)
2 x #8 x 50.8 mm (#8 x 2”)
1 x #8 x 76.2 mm (#8 x 3”)
S11
S4
S11
S11
S4
WB9 [FW2,TN2]
WL5 X 1[FW2]
S4 X 3
WB9 [FW2,TN2]
WL5 X 1[FW2]
S4 X 3
Pre-drill hole using a
3/16” drill bit for WL5.
FW2
WB9
FW2
WB9
TN2
WL5
WL5
2607
2606