Basic Features and Functions of the Throw /
Double Spin Technology ensures different degrees of speed, curve and spin are
served. The technology can also set the straight (no spin) serve that other
with a single wheel are unable to provide.
Program Mode allows players to set the combination of serves based on the desired
level of difficulty.
There are four mode selections to choose:
1)Fixed Mode Various kinds of serves land continuously at one point to be
chosen from 1-5 points.
2)Random Mode Balls land randomly on 5 possible points on the entire width of
the table.
3)
4)Program Mode Allows players to set a combination of serves based on the
desired level of difficulty.
Equipped with a remote control to make operation of the robot much easier.
serving
machines
Both long range and short range serves can be set to land on 1-5 points from right to
left on the entire width of the table, for a total of 10 landing points. Press the 'Left'
and 'Right' along with the 'Short' and 'Long' buttons on the remote control to select
the desired landing point(s).
Mixed Random Mode Balls land randomly on 10 possible landing points (5 long
range and 5 short range) on the entire with of the table.
Equipped with a memory function that can restore the most recent setting for repeat
training or use.
Equipped with a dust filter system to reduce the dust in the ball track and minimize
the possibility of a ball jam.
Ball collection net helps to collect the returned balls into the Throw.
Basic Features and Functions of the Throw
★
★
★
★
Factory Reset and Recommended Parameters
Type of Spin
Factory reset
Straight (no spin)
Top spin
Under spin
Random mode
Level of Spin Frequency of Serve
Hints: Please use the Factory Reset Parameters during initial use. Press Start/Stop on
the remote control to confirm and operate. Users can adjust and set the parameters
based on their skill level.
4（top spin)
4-9
4-7
4-9（top spin)
40
40-70
40-70
30-50
40-60
Recommended parameters
Factory Reset and Recommended Parameters
★
3（top spin)
★
★
★
