Page 2 Kim Lighting • 16555 E. Gale Ave. • P.O. Box 60080 • City of Industry, CA 91716-0080 • 626/968-5666 • FAX 626/330-3861
HA31 - Ribbon Arm Wall Mount with Top Scroll Installation Instructions
KIM LIGHTING LIMITED WARRANTY
When installed in accordance with Kim Installation Instructions and
accepted trade practices, the following shall apply:
General Product Limited Warranty Coverage
All material and component parts used in the manufacture of Kim
Products, are warranted to be free from defects of material and/or
workmanship for a period of 1 year from date of sale, with the following
exceptions:
Auxiliary Equipment
All auxiliary equipment (such as lamps, ballasts, and transformers)
provided by and/or included in Kim Products shall carry the component
manufacturer's warranty.
Copper and Bronze Landscape Components
Copper and Bronze Landscape fixture components shall be warranted
against defects of material and/or workmanship, and failure due to
corrosion, for a period of 25 years from date of sale.
Composite In-Grade Components
Composite In-Grade fixture components installed below grade, shall be
warranted against defects of material and/or workmanship, and failure
due to corrosion, for a period of 7 years from date of sale.
Aluminum Landscape Components
Aluminum Landscape fixture components not in direct contact with soil,
shall be warranted against defects of material and/or workmanship for a
period of 3 year from date of sale. Aluminum fixture components in
direct contact with soil shall be warranted from defects of material and
failure from corrosion for a period of 1 year from date of sale.
Limit of Liability and General Conditions
Only products which are installed, used and maintained in accordance
with applicable Kim instructions, specifications and accepted trade
practices, are covered by the Kim Warranty. During the warranty
period, with proof of purchase, Kim will repair or replace with the same
or similar product, at Kim's option, without charge. Labor costs are the
owner's responsibility and are excluded from this warranty. This
warranty is void if the product is modified, tampered with, misapplied,
poorly installed, improperly maintained, or subjected to abnormal
conditions.
Repair or replacement as provided under this warranty is the exclusive
remedy of the purchaser. This warranty is in lieu of all other warranties,
expressed or implied, including any implied warranty of fitness for a
particular application. Kim Lighting shall not be liable to the purchaser
for indirect or consequential damages.
9. Attach arm fitter cover.
How may we serve you better?
Please let us know. Visit our website at:
www.kimlighting.com
Your concerns are important to us.
7. Attach top scroll to ribbon arm and wall
plate cover.
8. Attach wall plate cover assembly to wall
plate. Secure using two (2) socket head
cap screws. Connect fixture wires to
supply wires observing polarity, i.e.; green-
to-ground, white-to-common, and black-to-
voltage.
10. Attach splice cover using the 10-32 flat
head stainless steel socket screw.
Socket
Head Cap
Screws (2)
Wall Plate
Cover
Assembly
Splice Cover Screw
