Kimex LVW09-46T User manual

Video Wall Mount
INSTALLATION MANUAL
LVW09-46T
rated
35kg/77lbs
46"~52"
200x200/300x200
300x300/400x200
400x300/400x400
600x400
LVW09-68T
rated
35kg/77lbs
55"~60"
200x200/300x200
300x300/400x200
400x300/400x400
600x400/600x600
800x400/800x600
13. Remove the Screws
14. Connect Tubes and Rods
A
D
C
Note: Next, you can continue the
installation by following step 1.

Recommended for Installation
IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation.
If any parts are missing or faulty, contact your place of purchase for a replacement.
Component Checklist
12
Package W
Package M
ST6.3x55
W-A
(x4) concrete anchors
W-B
(x4) D6 washers
W-C
(x4)
washers (x4)
M-F
small spacers (x8)
M-G
big spacers (x8)
M-H
M8x50
M-E
(x4)
M5x14
M-A
(x4) M6x14
M-B
(x4) M6x30
M-C
(x4) M8x30
M-D
(x4)
• Use with products heavier than the rated weights indicated may result in instability causing
possible injury.
• Please closely follow the assembly instructions. Improper installation may result in damage
or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed by
professionals.
• This product is designed to be installed on solid concrete walls or masonry walls.
• Make sure that the supporting surface will safely support the combined weight of the
equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting screws.
• This product contains small items that could be a choking hazard if swallowed. Keep these
items away from children.
•This product is intended for indoor use only. Using this product outdoors could lead to product
failure and personal injury.
CAUTION
have any questions regarding any of the instructions or warnings, please contact your
local distributor for assistance.
Read the entire instruction manual before you start installation and assembly. If you
M5x25
E (x2)
Plastic Locking Piece
F (x1)
Wall Plate (Landscape Mounting)
A (x1)
Adapter Bracket
B (x2)
Connecting Rod (Portrait Mounting)
C (x2)
Connecting Tube (Portrait Mounting)
D (x2)
6mm Allen Key
G (x1)

4
3
1. Plan the Mounting Placement
60mm
(2.4")
60mm
(2.4")
ø 10mm
(ø 3/8")
X=length of display Y=Height of display
Star
X
Y
X
Y+2mm
2X
2
Y
60mm
(2.4")
60mm
(2.4")
ø 10mm
(ø 3/8")
2. Masonry and Concrete Wall Mounting
Drill pilot holes
2
Mark the exact
location of
mounting holes
1
√X X
Screw the wall plate onto the wall
W-A W-B
W-C
1:1
W-A
W-C
W-B
WARNING
Installers must verify that the supporting surface will safely support the combined weight of the equipment
and all attached hardware and components.

3. Extend the Mounting Arm 4. Arrange the Adapter Brackets
400mm
600mm
B
6
5
For Landscape Mounting
For Portrait Mounting

8
7
5a. Flat Back Screen Installation
TV TV TV
M-A
M-F M-F
M-B
M-A M-B
1:1
M-F
· Choose the appropriate screws, washers and spacers (if necessary) according to the type of screen.
· Center the adapter brackets on the back of the display as shown, and screw the brackets onto the display, being
sure to not over-tighten.
1:1
M-C M-D
M-E M-F
M-G M-H
TV TV TV
5b. Non-Standard Back Screen Installation
M-F
M-C
M-D
M-G
M-F
M-C
M-D
M-H
M-F
M-H
M-G
M-C
M-D
M-F
M-H
M-E
M-F
M-H
M-E
M-G
M-F
M-H
M-E
M-G

6. Hook the Display onto the Wall Plate
E
Insert and tighten the screw to secure.
10
9
7. Push the Screen Back

9. Remove the Screens
8. Video Wall Installation
START 1
START 2
Note: Please start from the left at bottom.
12
11
Slide the screens on both sides, then unlock and
extend the screen that you're going to remove.

10. Adjustment
14
13
For Height Adjustment
For Depth Adjustment
Height adjustment
1
2
3
4
G

1
2
3
4
Depth Adjustment
16
15

MAINTENANCE:
Check that the product is secure and safe to use at regular intervals (at least every three months).
D1=D2
wall
D2
D1
11. Level the Displays
18
17
F
Note: Use the plastic locking piece
to measure and keep a 1.2 mm gap
between displays.
1.2mm
1.2mm
12. For Portrait Mounting: Reassemble the Wall Plate