Kinder Valley Teepee User manual

IMPORTANT! KEEP FOR FUTURE
REFERENCE
Dimensions(cm): (L)150 x (W)86 x (H)145*
Fits Mattress Size(cm): (L)140 x (W)70
• Easy assembly • Safe & sturdy • Stylish teepee shape
• Can be used as a sleep space, reading nook or
playhouse
*Approx. measurements only. Sizes may vary.
Contact Us...
E[email protected]
T0844 7744644 - Option 2
www.kinder-valley.com
Vaey
K I N D E R®
ASSEMBLY INSTRUCTIONS
Teepee Toddler Bed
EFC67

WARNING - Do not place this child’s bed in close proximity to heat sources, windows
and other furniture e.g. open fires, radiators, gas and electric heaters etc.
WARNING - Do not use this child’s bed if any part is broken, torn or missing and use
only spare parts approved by Kinder Valley.
WARNING - Do not use more than one mattress.
WARNING - Regularly check the screws are secure, loose fittings can result in
snagging clothes or cords posing a risk of strangulation. Assembly fittings should
always be tightened properly and care should always be taken that no screws are loose
to ensure your child does not trap parts of the body or clothing. Do not over tighten.
WARNING - Only use replacement parts supplied by or approved by Kinder Valley.
WARNING - Do not disassemble once the bed has been built.
IMPORTANT! KEEP FOR FUTURE REFERENCE
ASSEMBLY INSTRUCTIONS
TEEPEE TODDLER BED
Vaey
K I N D E R®
Instructions for safe use:
Before you start
This Kinder Valley toddler bed conforms to BS 8509:2008+A1:2011.
This Kinder Valley toddler bed is suitable from approximately 18 months to 4 years. It is
intended to be used by one child at a time.
We recommend you use any Kinder Valley mattress size 140cm x 70cm.
Use only on firm ground which is on a horizontal level and dry.
Children are likely to play, bounce, jump and climb on beds, therefore the child’s bed
should not be placed too close to other furniture or windows, blind cords, curtain pulls or
other strings or cords, and should be placed either tight to any wall or have a gap of 30cm
between the wall and the side of the bed.
In order to clean, use only a mild detergent and warm water. Do not bleach or use any
abrasive substances.

CHECK THAT YOU HAVE ALL FIXTURES AND FITTINGS BEFORE
ASSEMBLY, AND ENSURE THEY ARE NOT BROKEN.
A x1 Base
Number of people to assemble:
Two adults are required to
assemble this item.
x4 Legs
x1 Cross Rail
x4 Dowels x8 Barrel Nuts
x4 Triangles
x8 Long Bolts
(105mm)
x2 Short Bolts
(65mm)
x2 End Panels
B
C
D
E F
H
G
I
Fixtures & Fittings
x1 Allen Key 1 J
x1 Allen Key 2 K

Slot 2 x Legs together to form cross
over ends.
Insert 2 x Triangles into the top.
Repeat step with remaning 2 x Legs
and Triangles .
Step 1
Join 2 x End Panels to Base with 4 x dowels .
B A E
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 2
A
B
B
E
E
E
E
C
C
C
C
I
I
I
I

IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 3
Step 4
Join to
with Long Bolts using
Allen Key 1 and
Barrel Nuts .
H
J
Step 2
F
Step 1
Join the remaining
to using
Long Bolts and Barrel
Nuts .
H
Step 3
F
Step 2
Step 1
Step 2
H
H
F
F
Step 2
Step 3
H
HF
F

Join Cross Rail to
with 2 x Short Bolts using
Allen Key 2 .
G
K
Step 4
IMPORTANT - RETAIN FOR FUTURE REFERENCE
Step 5
D
G
G
D