King Young S695G3 User manual

Barebone System Unpacking Guide
Install CPU and CPU Cooler
Install Memory
INSTALLATION GUIDE
1
2
1
2
Loose the screws on the rear panel
from the case.
Pull out the mainboard from the case.
1
2
3
Release the CPU socket lever and lift the metal frame
of the CPU socket
Remoe the CPU socket cover. Be aware do not touch
any pins in the CPU socket.
Put the CPU to the socket. Align the CPU notches with
the socket alignment keys and gently put the CPU onto
the socket.
1
2
Insert SODIMM into the SODIMM slot
on the motherboard by 30 .
0
Push down the SODIMM.
R1 GigaLAN Port
R1 GigaLAN Port
R2 Two USB 3.1 Ports
R2 Two USB 3.1 Ports
R3 PS/2 Keyboard and Mouse Ports
R3 PS/2 Keyboard and Mouse Ports
R4 COM 1
R4 COM 1
R5 DVI-I Port
R5 DVI-I Port
R6 DC 12~48V Barrel Jack Power In
R6 DC 12~48V Barrel Jack Power In
R7 Line-Out Audio Port
R7 Line-Out Audio Port
R8 DP (Display Port)
R8 DP (Display Port)
Specifications are for reference only and subject to change without notice.
1
1
LI91_G3_1
Installation
Guide
Installation Guide
Driver DVD CPU Cooler
Accessories Pack
Power Adapter
Power Cord
System Unit
SILICONEHEAT
SINKPASTE
SILICONEHEAT
SINKPASTE
INKPAS
SILICONEHEAT
SINKPASTE
SILICONEHEAT
SINKPASTE
INKPAS
F1 Mic-In Phone Jack
F1 Mic-In Phone Jack
F2 Power Button
F2 Power Button
F3 Reset Button
F3 Reset Button
F4 Three GigaLAN Ports
F4 Three GigaLAN Ports
F5 Four USB 3.1 Ports
F5 Four USB 3.1 Ports
Standard LI91G3 Front IO Ports
1 Secondary COM Port Header
1 Secondary COM Port Header
2 CPU Socket
2 CPU Socket
3 Optional Riser Card Slot
3 Optional Riser Card Slot
4 Intel Giga LAN Chip
4 Intel Giga LAN Chip
5 SODIMM Slots
5 SODIMM Slots
6 Intel Q370 Chip
6 Intel Q370 Chip
7 Super IO Chip
7 Super IO Chip
8 CPU Cooling Fan Power Connector
8 CPU Cooling Fan Power Connector
9 CMOS Battery
9 CMOS Battery
10 SATA Cable Connector
10 SATA Cable Connector
11 SATA Power Connector
11 SATA Power Connector
12 SATA HDD Connector
12 SATA HDD Connector
13 Buzzler
13 Buzzler
Standard LI91G3 Rear IO Ports
R8 R7 R6 R5 R4 R3
R1
R2
F5 F4 F3 F2 F1
When CPU is properly seated, replace the metal
frame and push the CPU socket lever back to its
locked position.
4
5
6
Glue the heatsink compound on the CPU surface.
Install CPU cooler on top of CPU. Tighten CPU cooler
with screws into pillaret.
Connect CPU FAN connector to mainboard CPU
FAN socket.
Mainboard Layout
Item Checklist
Complete
SODIMM
SODIMM Slot
2
1
2
4
5
3
1
7
6
8
9
11
10
12
13

Part List
STEP 1
DVD-ROM Drive Screws (* 5)
Case Screws (* 2)
K
H
EMI Sticker (*2)
Rubber Stand (*4)
J
L
I
STEP 3
Install Case
Install Slim HDD
STEP 2
Install DVD-ROM Drive
Complete System
LI91_G3_2
CPU Cooler Screws (*4)
M
Accessory Pack
J
DVD-ROM Drive
Bracket
A
B
C
D
2.5" HDD Screws (* 5)
E
COM/DVI Screws (* 6)
Front Panel
Rear Panel
Case
2
3
180
0
Turnover the Mainboard.
2
3
N
CPU Cooler Paste (* 1)
T
SINK PASTE
SILICONEHEAT
SINKPASTE
INK P
AS
INSTALLATION GUIDE
Mainboard
F
B
HDD
1
1Install HDD attach to Drive Adapter.
**Notice:The HDD's label side is up.
DVD-ROM drive
B
H
K
Paste EMI Stickers to the top of the DVD-ROM drive.
Connecting onboard SATA cable to the DVD-ROM drive.
1
3
2
3
2
1
Tighten DVD-ROM drive with screws to the DVD-ROM
drive braket.
Install mainboard into the case.
1
Tighten rear panel with screws on the case.
2
Stick the rubber stands.
3
2
CPU Cooler
G
L
I
F
1
3
Complete Memory
Complete CPU/cooler
2
G
The system uses entire case for
partial heat dissipation, so the
normal operating temperature
of the case is between 35 C ~ 45 C.
Specification is subject to change without notice,
it is for reference only.
Tighten HDD with screws to the Mainboard.
Hardware Installation