Kingfisher Banana Cantilever Parasol User manual

Place Part 2 onto a flat
surface and interlink Part 1
over the top.
Align the holes on Part 3 with
the holes on both Part 1 and
Part 2. Insert the bolts (A)
through the washers (B) and
tighten.
-Pull the parasol into place,
ensuring the ratchet rope
feeds correctly into the
pole/frame, as shown above.
Setup the main arm support
of the parasol as shown
above. Please take your
time, DO NOT over force.
Using the locking mechanism
on the horizontal pole, fix the
parasol in place to ensure
stability.
Insert the parasol (4) into the
upright post (3) and ensure
that the locking pin locks in
place through the hole on
upright post (3).
Insert the securing nut as
shown above and tighten up.
Use the crank handle to
elevate the parasol.
Secure the parasol base to
ground with suitable parasol
weights. Your parasol is now
ready for use, please use
responsibly and follow safety
1 2 3
4 5 6
7 8 9
3
Parts
Assembly
1. 1x Top cross beam (support)
2. 1x Bottom cross beam (support)
3. 1x Upright post
4. 1x Pre-assembled parsol
A. 4x Large bolts
B. 4x Washers
C. 1x Securing bolt
3A
B
C
2
2
4
1
1A/B
A/B
1
2
34