KingKutter XB User manual

XBXB
XBXB
XB
PARTS MANUAL
PO Box 1200 Phone [phone]
305 Commerce Drive Fax [phone]
Winfield, Alabama 35594
www.kingkutter.com

2
CONTENTS
Page
Middle Buster/ Sub Soiler ------------------------------------------------------- 3
CarryAll ------------------------------------------------------------------------------ 4
Dirt Scoop --------------------------------------------------------------------------- 5
Yard Rake---------------------------------------------------------------------------- 6
Rear Blade -------------------------------------------------------------------------- 7
Box Blade---------------------------------------------------------------------------- 8
Angle Frame Disc ----------------------------------------------------------------- 9
Kutter ------------------------------------------------------------------------------- 10
Finishing Mower------------------------------------------------------------------ 12
40hp Gearbox -------------------------------------------------------------------- 14
PTO Shaft ------------------------------------------------------------------------- 16
Blade Spindle Unit--------------------------------------------------------------- 17

3
Ref. Part Name Part No.
1 (Cat 1) Lift Pins (2/pk) 500001
4
3177007 503002
Furrower-12"
1/2x 3-1/2 Plow Bolt Set (2/pk)
2Sub-SoilerPoint 177008
XB MIDDLE BUSTER/SUB-SOILER
1
2
3
4
No.

XB CARRY ALL
4
Ref.
No. Part Name
1 (Cat 1) Lift Pin (2/pk) 500001
Part #
1

5
Ref.
No. Part Name 24"
1 (Cat 1) Lift Pin (2/pk) 500001
2
3505003
325035
HingePin
FrameLatchHandle
XB DIRT SCOOP
1
2
3
4 LatchRollerAssembly(notshown) 505001
4
RightSide

Ref.
No. Part Name Part No.
1 (Cat 1) Lift Pin (2/pk) 500001
2
3340065 503006
IndexPin
Tines(5/pk)
XB YARD RAKE
6
4 60" Strap 350063
5 3/8 x 1 Bolt
6 -
-
3/8 x 1-1/2 Bolt
4
3
2
1
6
5

Ref.
No. Part Name Part No.
1 (Cat 1) Lift Pin (2/pk) 500001
2340065
3188015
IndexPin
60" Cutting Edge
XB REAR BLADE
4 Cutting Edge Bolt Set (9/pk) 503001
7
2
1
4
3

XB BOX BLADE
Ref.
No. Part Name Part Number
1 (Cat 1) Lift Pin (2/pk) 500001
218800548" Cutting Edge
3
4RipperShank/wTooth "L' Pin /w Hair Pin
CuttingEdgeMountingBoltSet
403012
503501
5030015
6 LiftArm 311055
LiftArm Brace 31105675/8 x 4-1/2 LiftArm Spacer Kit85/8 x 2 Bolt9501090
-
Tooth(weldon)10 174010
25
REAR VIEWREAR VIEW
3
4
1
10
9
8
6
7
8

XB ANGLE FRAME DISC
Ref.
No. Part Name Part Number
1 (Cat 1) Lift Pin (2/pk)
2
3
4L
LiftArms
LiftArm Spacer Kit
LiftArm Brace LH
LiftArm Brace RH
Bearing Caps & Spool
Spacer
Lock Nuts - 1" (Pkg -4)
311070
501090
504110
504280
4R
5
6
7
8 AxleWasher 322005
9Disc Blade 14" - Notched 311068
10
500001
311071
311072
401035
11 Axle
BearingStand
-
12 1/2 x 1-1/2 Bolts 504070
13 1/2 x 5-1/2 Bearing Cap Bolt Set (2/pk)
189214
6
5
4L 3
2
1
7
8
910
11
12
13
4R
9
129500

10
XB KUTTER

11
Ref.
No. Part Name Part Number 4'
1 CAT 1. Lift Pins (Pkg. of 2) 500001
2
3
4
6
8
10
11
12
13
14
15
16
17
18
LiftArm
SwivelLinkKit(inc.bolt)
LiftArmAttachment Kit(inc.bolts)
BeltGuardKit(inc.beltandstrip)
Left Side Panel Kit (inc. bolts)
Tail WheelArm Spacer Kit
TailWheelArm
WheelKit (inc.axlebolt)
Tail WheelArm Fork
Blade Bolt Set (Pkg. of 2)
Mower Blade Set(Pkg. of 2)
StumpJumper
29"PTOShaft
311100
311099
501003
184000
311101
501004
501007
403700
502030
403026
501001
501118
403031
147029
9
7501006
Lift Arm Brace 501027
5501005
BeltGuard
GearBox
RightSide Panel Kit (inc.bolts)

12
XB FINISHING MOWER

Ref.
No. Part Name Part Number
1 TopCover 124684
2
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
GearBoxPlate
SpindleUnit-Single
IdlerPulley- Single
BeltAdjustmentAssembly
GearBox
MainPulley-Single
Bolt3/4"x4"/wNut
SwivelLinkSet
(Cat 1) Lift Pin (2/pk)
LiftArm Spacer /w Bolt & Nut
LiftArmAssembly
CenterRoller/wAxle
RollerAxle
HeightAdjuster Set
TailWheelArm
SidePanel-RH
SidePanel-LHw/Chute
WheelFork
AxleBolt3/4"x5"/wNut
403029
502303
164090
403682
1671081
184000
165114
502011
502010
500001
502012
403662
502110
403670
502120
403700
403665
403681
403023
502125
6
5
4
26
27
28
Blade Set /w Bolts
SpindlePulley-Single
22"PTOShaft
LHBladeBoltSet /w Washer
502690
502316
502313
147022
502310
25
ChainAssembly
24
Tire&Rim/wAxle & Nut 502015
13
Plastic Knob
*1B-108
V-Belt*
3
7
8
502287

14
40 HP GEARBOX

15
Ref.
No. Part Name Gearbox
1 SnapRing
2
3
5
7
9
11
12
13
14
15
16
17
19
10
8
4
6
InputSeal(NAK35X54X10)
FrontCap
FrontCapGasket
SnapRing
SnapRing
Bearing(Hoover208)
InputGear
InputShaft
Bearing (NSK6207)
Housing
OutputShaft
Spacer
OutputSeal(NAK40X54X7)
Bottom Cap
1"CastleNut/wWasher & Cotter Pin
1/2" Pipe Plug
1/8" Pipe Plug
3/8" x 1" Bolt & Lockwasher
184000
106138
156010
129015
131031
155005
186010
129010
185005
131045
156005
124131
129005
501110
131035
131040
-
185007
124130
131030
18
20
Bottom Cap Gasket
155010

16
Ref.
No. Part Name 147022
1 RollPin Kit
2
3
4
MaleTubeEndYoke
ImplementEndYoke
FemaleTubeEndYoke
500131
151045
151040
151050
Tractor EndYoke
InnerTube14 Series
OuterTube14 Series
Cross Kit #4
QuickDisconnectPin
5
6
7
8
9
151035
151090
151091
170015
170110
SafetyShieldBYPY 12431010 SafetyShieldEUROCARDAN 12431110
147029
500131
151045
151040
151050
151035
151090
151091
170015
170110
124310
SHEAR PIN PTO SHAFT
124311

17
BLADE SPINDLE UNIT
Ref.
No. Part Name 502303
1BallBearings(6205)(2/pk),Snaprings(4/pk) 555009
2502313
3502310
Seals(2/pk)(TCM25X52X7TC)*
SpindlePulley/wNut & Key
BladeBoltSet(3)/wWasher
*Old Style Seal (TCM 32X52X7SC)
2
1
3

18

1. Limited Warranty.
King Kutter, Inc. (“King Kutter”), P.O. Box 480, Winfield, Alabama 35594, warrants to the original retail
purchaser that the product that is the subject of this sale is free from defects in material and workmanship
at the time of sale.
Underthis warranty,KingKutter willrepairthe defectiveproductfreeofcharge tothe Purchaser, witheither
new or used and reconditioned replacement parts. All warranty service will be performed at service cen-
tersdesignated byKing Kutter. IfKingKutteris unableto repairtheproducttoconformtothewarrantyafter
a reasonable number of attempts, King Kutter will provide, at its option, one of the following: (a) replace-
ment for the product or, (b) a full refund of the purchase price. Repair, replacement, or refund are the
Purchaser’s EXCLUSIVE remedies against King Kutter under this limited warranty. King Kutter will not be
liable for any special, incidental or consequential damages based upon breach or warranty, breach of
contract,negligence, stricttortliability, orany otherlegal theory. Such damagesinclude,butarenot limited
to, loss of profits, loss of savings or revenue, loss of use of the product or any associated equipment, cost
of capital, cost of any substitute equipment, facilities or services, down time, the claims of third parties
including customers, and injury to property. These limitations also apply, to the extent allowed by law, to
personalinjury.
The purchaser must notify the Seller in writing of any defect in material or workmanship within one (1) year
following the date of purchase. If the equipment is used for commercial purposes, the Purchaser must
notifythe Sellerin writingof anydefect inmaterialorworkmanshipwithin ninety(90) daysfollowing thedate
of purchase. In no event will King Kutter be liable under this warranty unless written notice is received by
the Seller within one (1) year from the date of original retail sale.
2. Warranty of Title.
King Kutter warrants that it transfers a good title to the product free of any encumbrances, and free of the
rightful claim of any third party for infringement of patent or copyright.
3. What is Not Covered by This Limited Warranty.
King Kutter will not be responsible for damage to or failure in the product which results from accident,
misuse, abuse, neglect, installation of attachments not provided by King Kutter, modifications to the prod-
uct, or damage caused by use of the product for purposes other than those for which it was designed.
4. No Other Warranties.
Unlessmodified inwritingandsignedby bothparties, thisagreement isunderstood tobe thecomplete and
exclusive agreement and warranty between King Kutter and Purchaser, superseding all prior agreements,
oral and written, and all other communication between King Kutter and Purchaser related to the subject
matter of this agreement.
THISLIMITEDWARRANTYISINLIEU OFALLOTHERWARRANTIES,EXPRESSORIMPLIED,INCLUD-
ING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED
WARRANTYOF FITNESSFORAPARTICULARPURPOSE. No employeeof KingKutter noranyone else
is authorized to make any warranty or representation in addition to or different from those made in this
agreement.
5.Allocation of Risk.
This agreement allocates the risk of product failure between King Kutter and the Purchaser. ThisAlloca-
tion is recognized by both parties as reflected in the price of the goods. The Purchaser acknowledges that
he or she has read this agreement, understands it, and is bound by its terms.
19