Kino KR615 Owner's manual
Sanaye Sard Sobouh Esfahan
Installation and operation of stand refrigerators and freezers
Contents
Talk with consumers.....................................................................................1
Location, installation and operation method.................................................2
Product alignment method ............................................................................3
Cleaning various parts of the appliance ........................................................5
Connection to electricity power:...................................................................6
Set the refrigeration.......................................................................................7
Defrosting operation......................................................................................8
Technical Specifications of Stand Products............................................... 11
Showcase specification and location of temperature sensor ...................... 12
Troubleshooting and flaw detection methods ............................................ 13
Climate class of the test room .................................................................... 14
Electrical diagram of KR series products................................................... 15
Electrical diagram of KF series products................................................... 16
Proposed food storage table ....................................................................... 17
Talk with consumers
Congratulations on your taste and your choice of buying Kino products .We
are aware that your product has been made and tested with the highest
quality raw materials according to national and international standards , strict
monitoring and control.
It is recommended that you study the contents of this manual for optimal
using of the product carefully and note that the devices installed only by the
authorized representatives of the Kino Corporation will benefit from the
guarantee.
Warning: This device is not intended for use by persons (including
children) with limited physical, bodily or mental capabilities, or by
persons who do not have experience and knowledge of using it and for
kids to play with.
Warning: when installing this unit, place the plug in the socket with
earth wire outlets. Any kind of electric shock or damage caused by using
of this product is beyond the commitments of the company.
With respect
KINO
Location, installation and operation method
The location of the refrigerator and freezer should be chosen so that the air
can flow around it easily.
The tips for choosing the right place are as follows:
away from warmth such as stove , kettle and heater
Away from the sun
Away from humid places
For greater efficiency and good ventilation for cooling the
condenser, the device must be at least 15 centimeter away from the wall.
Warning:
Dear customer, make sure of
your product cooling system
before placing the goods in it
.the optimal cooling temperature
for the freezer is -18 and for the
refrigerator is +4 .it takes at least
5 hours to startup the appliance
to provide this refrigerator.
Product alignment method
To prevent damage of the appliance during transition, the wooden palette is
installed under the product. First, remove the wooden palette an install the
adjusting screws in the product cavity and adjust the alignment of the
appliance .then tighten the base nut to the end with a wrench.
15 cm
Tip:
The balance of the device is very important for preventing vibration and also
for opening and closing the door.
How to balance the device:
To align the device, first adjust the brackets so that the device stays in each
position and then open the front set points slightly to allow the device to
slide slightly towards the rear .it will cause the door to automatically close
after its opening.
Important tips:
After aligning the device and before connecting to the electricity, the
device should be kept at its place for at least 2 hours
When electricity connect and disconnect consecutively, disconnect
the power plug from the power outlet and connect the power plug
again at least 15 minutes later.
Allow the compressor of device to turn on and off, 3 or 4 times
before placing goods inside the appliance.
Cleaning various parts of the appliance
Your product has been cleaned and refit before packaging and sending.
However, it’s best to follow the sanitary conditions before connecting the
power plug to the city’s electricity, washing the interior of the cabin so that it
can be hygienically a good place to hold your food.
Follow the instructions below to wash the various internal and external
parts of the appliance
All internal parts of the device should be washed with soluble in a
tablespoon of baking soda in one liter of water with a soft sponge
and dry with soft cloth.
Other external parts of the appliance should be cleaned with a soft
cloth and do not use detergents.
Cleaning the device Condenser (black net behind the device) is very
effective in operation of the product, so it is recommended that every
6 months, using a hair brush, and using a vacuum cleaner, Clean the
condenser of appliance away from the dust or masses that may be
added on it.
Note that appliance is turned off before cleaning
and the cloth or plastic can prevent dust from
entering the back fan.
It is emphasized that you should not use ground wash sponge,
gasoline thinner, hot water, etc. to rinse the appliance
Avoid the use of volatile oil materials (vaporizable) like gasoline,
and avoid cleaning plastic and rubber parts separately.
Never washing internal and external parts of the appliance with
water pressure directly.
Connection to electricity power:
Your device is powered by 220 volts. To power the device, use an
independent 220 v outlet from the meter with a minimum cable of 1*2 mm.
never use the power plug that connects to the appliance for the electrical
usage.
In areas with high power fluctuations, be sure to use a voltage regulator.
(Consult sales service unit)
Important tips:
When the power supply be damaged, it must be replaced by
manufacturer or authorized service personnel or the person with the
same qualification in order to avoid danger.
Set the refrigeration
The temperature inside the product is adjusted by the thermostat. The
thermostat is located in the upper part of the cabin below the frame. In the
refrigerator, the refrigerating setup is carried out by the thermostat and if the
rotation is in clockwise direction, the product cooling is increasing and as the
rotation is in the direction of the image, the cooling of the product is
decreasing.
Tip: in the models of the product that the temperature setting is done with the
digital thermostat, first select the set option and use the key to increase
the cold and key to decrease.
Defrosting operation
Each time the product’s door opens; warm and humid air enters it and creates
a thrush around the evaporator. The increase in the thickness of the thrush
prevents the normal functioning of the product. It is necessary to remove the
thrush from time to time. KINO refrigerator has an automatic Defrosting
system. When the compressor is restored, the continuous operation of the
inside fan will melt the thrush on the evaporator. Melting thrush will flowing
out of the refrigerator.
Mechanical thermostat
WarmerMax
Digital thermostat
CoolerMin
Tip:
Be careful that the intake cavity of the cabin is monitored every month so
that food or particles are not blocking water outlet.
If the cavity is blocked, clean the outlet path.
In the event of placing the goods in the refrigerator so as to adhere to
the evaporator’s plate, the thrush melting operation will be disrupted.
To melt the freezer thrush, first turn off the device and then remove
the food from the cabin. Keep the door open and allow all the thrush
to melt then with the help of a sponge remove the water from the
appliance and dry it. Turn on the device and place the food in the
freezer again after cooling completely.
To prevent the increase of frozen food temperature during thrush
melting keep it in layers of the newspaper or keep in a different
freezer , however beware that increasing the temperature of frozen
foods during thrush melting may reduce the storage life of these
substances.
Water outlet
Warning:
Avoid placing flammable gas containing cans in this device.
Do not place the glass containing fluids inside the freezer. The
freezer is only use to store frozen goods.
Tip:
The freezer products have delay in starting the compressor during
startup. It takes about 3 minutes to turn on the product.
Technical Specifications of Stand Products
Amounts
Specification
KR500
KF680
KR680
KF615WL
KF615
KR615WL
KR615
model
Refer to the profile labels inside the cabin
Type of refrigerant
Amount of refrigerant
(g)
215
340
340
290
290
290
290
Net
volume
Cabin volume
(L)
285
490
490
370
370
370
370
Gross
volume
Refer to the profile labels inside the cabin
Power and Current
220-240 V-AC-50 Hz
Frequency and voltage
are allowed
500
680
615
615
615
615
Width
(mm)
Product
dimension
525
555
525
525
525
525
Depth
(mm)
2010
2100
1850
2010
1850
2010
Height
(mm)
75
100
90
96
96
80
80
Net product weight(Kg)
420
---
700
---
550
Capacity with 300 ml
can (number)
60
---
120
---
78
Capacity with 1500 ml
can (number)
(0,+5)
(-24,-
18)
(0,+5)
(-24,-17)
(0,+5)
Temperature range (C)
20
Maximum permitted
load per floor(Kg)
120
Load limit of the cabin
(Kg)
Warning:
Maximum permissible loading per floor is 20 kg
Showcase specification and location of temperature sensor
row
Product model
specification
Total display
area
(m2)
Refrigerated
shelf area
(m2)
Temperature sensor
location
Refrigerator 615
single door
Behind the inside fan
frame
Refrigerator 615
double door
Behind the inside fan
frame
Freezer 615 single
door (10 floors)
Interior surface of the
cabinet back wall
Freezer 615
double door (10
floors)
Interior surface of the
cabinet back wall
Refrigerator 680
single door
Behind the inside fan
frame
Refrigerator 680
double door
Behind the inside fan
frame
Freezer 680 single
door
Interior surface of the
cabinet back wall
Freezer 680
double door
Interior surface of the
cabinet back wall
Minicooler
Behind the inside fan
frame
50-width
Refrigerator of
single door
Behind the inside fan
frame
Troubleshooting and flaw detection methods
flaws
cause
Flaw detection method
The
refrigerator
does not
light up
Power does not go into the
outlet
Check the fuse and plug
The thermostat is set to off
Set the thermostat degree
Power voltage is weak
Check the wiring and use a suitable
stabilizer if necessary
Compressor
works too
much
The product door is too open
and closed
Control the door opening
The degree of thermostat is high
Lower the thermostat degree
The condenser pipes are dirty
Clean the pipes
The product is in a very hot
environment
Keep the product away from heat or
sunlight
Inside of the
cabin does
not cool
enough
The degree of thermostat is low
Increase the degree of thermostat
Product door is too open or
closed
Control the door opening
The product is in a very hot
environment
Keep the product away from heat or
sunlight
The device
has a sound
The device is not aligned
Align the adjusting screws
The adjusting screws are loose
and collide with the parts
behind the device
Tighten the adjusting screws and prevent
the parts from falling apart
The inside
light does
not turn on
LED is burnt out
LED must be replaced
The power of the appliance is
disconnected
Connect the plug into the power
Climate class of the test room
The climatic class of the test room in which it was tested is class 4 or semi-
tropical.
(According to Iran’s national standard-showcase refrigerating cabinISIRR 9187-2)
Climate
class
Water weight relative to
dry air g/kg
Dew
point
(c)
Relative
humidity
)%(
Dry bubble
temperature
(c)
Electrical diagram of KR series products
Electrical diagram of KF series products
Proposed food storage table
row
Food
Storage time
Storage temperature
Storage place
Butter
Maximum 1
year
T<0
Freezer
2
Cheese
6 months
1-4 c
Refrigerator
whey
40 days
1-6 c
Refrigerator
Cream cheese
40 days
1-6 c
Refrigerator
Candies
Maximum 3
days
1-3 c
Refrigerator
hamburger
6 months
-18 c
Freezer
Minced meat
12 hours
3 months
0-4 c
-18 c
Refrigerator
Freezer
Beef
2-3 days
9 months
0-4 c
-18 c
Refrigerator
Freezer
Fresh chicken
3 days
0-4 c
Refrigerator
Frozen Poultry
meat
7-12 months
c
Freezer
Fresh Fish
1- 2 days
0-2 c
Refrigerator
Frozen Fish
3 months
-18 c
Freezer
sausages
1 month
0-4 c
Refrigerator
Ice cream
6 month
-18 c
Freezer
Frozen vegetables
1 year
-18 c
Freezer
6
Frozen pizza
6 month
-18 c
Freezer
This manual suits for next models
6
Table of contents
