START-UP
Before using your dishwasher, remove all packaging materials. Read this entire Consumer Reference Guide, as well as the User
Instructions. You will find important safety information and useful operating tips.
For all models:
1. Rinse aid is essential for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2=
3.
Scrape large food soil and hard items (toothpicks or bones)
from dishes. You do not need to prerinse your dishes.
Properly load the dishwasher. (See "Loading.") Load dishes
with space in between so water will reach the soiled surfaces.
Make sure nothing keeps the spray arm(s) from spinning
freely.
\
NOTE: Ifthe dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
IMPORTANT:
• When the cycle starts, you will see a rotating pattern of lights
in the display window indicating that the dishwasher is
operating. This pattern will continue for up to 6 minutes while
the multiple sensors check the incoming water temperature,
rinse aid usage and soil level on dishes and cookware. The
sensors then determine the ideal wash for your dish load.
After sensing is complete, the display will show the number of
minutes left in the cycle and the cycle countdown will begin.
4. Add detergent. Always use a high-quality brand detergent.
(See "Dishwasher Use" in the User Instructions.)
5. Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
6. Press the desired cycle and option selections on the control
panel. (See "Cycles and Options.")
For Model KUDS02SR:
7. Close the door firmly. Press START/RESUME on the front of
the dishwasher door. Or press START/RESUME to repeat the
same cycle and options as in the previous cycle.
• The cycle countdown pauses while the dishwasher heats the
water to a set temperature. (See "Cycle Selections.")
For Models KUDS02FR, KUDU02FR, KUDU02VSPA,
KUDS02FSPA and KUDS03FS:
7. Press START/RESUME. Or press START/RESUME to repeat
the same cycle and options as in the previous cycle. The
selected cycle and option lights will glow.
8. Push door firmly closed within 3 seconds of pressing Start/
Resume.
NOTE: Ifthe dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
For model KUDS021S
7. Close the door firmly. Press START/RESUME. Or press
START/RESUME to repeat the same cycle and options as in
the previous cycle. The selected cycle and option lights will
glow.
NOTE: Ifthe dishwasher is not started within 30 seconds after
selecting the cycle and options, it will revert to the last cycle
and options completed.
