KitchenAid KBRS22KFAL0 User manual

MODEL NO.:
FREEZER PANEL SIZE: b/a x 13%
FRIDGE PANEL SIZE: aa’/a x 38 ‘1%
Tool6 Required:
1, #2 Philllps Screwdriver
1, 7/M’ HSSDrill Bit
1. 3/8’ Electric Drlll
l Safety Glasses
\1 ...
INSTALLATION:
g Not.:
Use cardboard between frldgelfreerer lace and back of panel being
lnstolled ONlY It panel b less than l/4’ thick. (cardboard not Included)
6TEP II:
Ictytridge;down on Itsback. Remove all plugs (opposlte hinge) screwi.
handles, etc.. bn the frldgelfreezef door as they will lntertere for panels
and trim kit to be Malled property.
5rEP #2
Place panel (and cardboard) on freezer face maklng sure tt Lscentered.
(glue or tape Ifdesired)
Take paH#l put on top of freezer door with notch
mound hinge. Be sLre ex-trusion iS allgnea wli3
slder of freezerdoor ond pace1 is tirmly In place.
When Parts are in desired plcce. take 7/6i’ &III
bit, drill holes and attach with sc:ews providec.
Worklng CounterclockwIse. tcke port #2 aI& WI:~ top of port Y1.
Maklng sure panel Isfirmly in plcce; drill Ocd attceh with screws.
STEPY5
lake part Y3 put on bottom of freezer door witt retch around hinge.
ae sure it is aligned witn poti f2. Drill ant atacr\ with screws.
STEP 66
Take port Yd making sure it ISCllgned with 3arf 5 * at the top xv.2 part $3
at the bOttOm. When trlm and panel is firmly in =Icce. drlll ana aeach with
screws.
STEP #7
Follow all the previous steps fcr frlage insta~lor~or
STEP YS
Stand fridge up. let stand for 4 hours telore zlugglng inl