Klokers KLOK-02 User manual

Crown pulled (2)
Seconds (S)
Minutes (M)
Pusher (P)
Crown pushed (1)
Hours (H)&
Perpetual calendar (Pc)
Time zone (Tz)
10h20’45”
Red button (R)
SETTINGS
1. Pulsing the pusher (P), choose a time zone (Tz).
2. To validate, pull the crown to position (2) and push it into position (1).
3. Pulsing the pusher (P), set the hour (H).
4. To validate, pull the crown to position (2) and push it into position (1).
5. Pulsing the pusher (P), set the minute (M).
6. To validate, pull the crown to position (2) and push it into position (1).
7. Pulsing the pusher (P), set the year (Pd).
8. To validate, pull the crown to position (2) and push it into position (1).
9. Pulsing the pusher (P), set the month (Pd).
10. To validate, pull the crown to position (2) and push it into position (1).
11. Pulsing the pusher (P), set the date (Pd).
12. To validate, pull the crown to position (2) and push it into position (1).
13. Time is displayed.
NOTA
If you change the battery, please check the index settings.
KLOK-02
BASIC FUNCTIONING
Jumping hours, retrograde minutes and seconds, perpetual date, time zone (GMT).
The procedure must be performed in its entirety in order to validate the settings.
If you make a mistake, you can’t go back to the settings, you must end the process
to restart it from the beginning. If you change the battery, please check the
index settings.
We invite you to consult the following tutorial in order to set time on your
watch.
MODE DISPLAY
User manual
klokers.com

INDEX SETTINGS
When must you carry out the index setting procedure?
1. After replacing the battery
2. When the minutes are not centered
within the top part of the dial
3. When the hours and/or the time zone
are not aligned and readable in the
window
4. When the seconds hand does not
start from 05 (First line of the
white zone)
We invite you to consult the following
tutorial showing the index setting
procedure.
User manual
klokers.com
NOTA
The hands may have indexation issues in case of shock, sharp deceleration, faulty contact,
battery replacement, etc.
This particular feature of our watch ensures the security of the movement and long-term
functioning.

INDEX SETTINGS
1. Press the crown (1) for ve seconds:
minutes and seconds go back to the banking position 0.
2. Select the timezone London (LON) with the pusher (P).
3. To validate, pull the crown to position (2) and push it into position (1).
4. Pulse the pusher (P) to adjust the disc of tens of the hours to 0.
5. To validate, pull the crown to position (2) and push it into position (1).
6. Pulse the pusher (P) to adjust the disc of units of the hours to 0.
7. To validate, pull the crown to position (2) and push it into position (1).
8. The watch is set for the programmed time.
FUNCTIONS
• Change the time zone (Tz) by pressing briey on the pusher (P).
The time is automatically set.
• Display the date (Pc) by pressing on the pusher (P) for three seconds.
The time reappears after fteen seconds.
• Turning the crown does not activate any function.
END OF BATTERY LIFE INDICATOR
When the battery shows signs of weakness, the hand of seconds jumps every ve
seconds.It continues in this way until the battery is completely empty.
User manual
klokers.com
Crown pulled (2)
Seconds (S)
Minutes (M)
Pusher (P)
Crown pushed (1)
Hours (H)&
Perpetual calendar (Pc)
Time zone (Tz)
10h20’45”
Red button (R)

User manual
klokers.com
162
remove
3
clip
45
CLIP/REMOVE THE WATCH HEAD FROM THE BRACELET
REMOVE THE CASE FROM THE BRACELET
1. Hold rmly the watch head in your hand.
2. Push the red button at 8 o’clock to unlock the mecanism (R).
3. Holding the button, slide the watch head up to unlock
it from the bracelet (or any other accessory).
CLIP THE CASE TO THE BRACELET
4. Hold rmly the watch head in your hand.
5. Slide the watch head from top to bottom on the Key of
the bracelet (or any other klokers accessory).
6. Push the watch-head until a click is felt. Only this click will
guarantee that the watch-head is correctly clipped on the bracelet.
ALL THE KLOKERS PRODUCTS ARE INTERCHANGEABLE WITH EACH OTHER!
Warning: handle the watch head with care and be sure you hold it rmly while
unlocking it from its support to not drop it. klokers is not responsible in
case of a fall during this manipulation.

User manual
klokers.com
CHARACTERISTICS
THE CASING
• The klokers Key: push button
at eight o’clock to unlock the
watch head from its base
• Material: metal-polymer composite
casing and grained eect imitation
leather covering. High scratch
resistance and smooth touch. Metal
ring, pushbutton and crown
• Dimensions: 43.2 mm wide x 13.2 mm deep
• Water Resistant (splashproof)
Rain
splash
Hand
washing Shower Bath Swimming Diving
YES YES NO NO NO NO
• Glass: domed high transparency
• polymer polymethyl methacrylate
MOVEMENT
• Swiss Made
• SOPROD Mechatronic
• Five micro-motors
• TI Microcontroller
BATTERY
• 3V battery, standard 2025
AUTONOMY
• About 20 months
GUARANTEE
• Two-year warranty against all
production defects (See the guarantee
given at time of purchase)
USAGE PRECAUTION
Your watch comes with its blue static
protections. Remove them before considering
any use of the watch (glass, watch case-
back, the klokers’ key, etc...), otherwise
the closing system (watch-case and bracelet)
may be damaged.
Be sure to constantly protect the push
button from any impact or pressure that
could unlock the watch-head.
When manipulating your watch and removing it
from the klokers’ accessories, be sure to
rmly hold the watch-head.
Please be sure to handle your klokers with
care, taking care not to drop, knock or
crash the watch head. The movement could be
irreversibly damaged.

User manual
klokers.com
WARNING
Each watch having an impact or trace of shock on the glass
or on the middle of watch-case will not be covered by the
guarantee.
Do not try to dismantle or modify the watch.
Do not remove the battery from the watch: battery replacement
requires special knowledge and professional expertise.
Please contact a person working in the shop where your
purchased your watch.
Keep your KLOK-02 away from any electro magnetic sources
Please do not use your KLOK-02 when playing sports (golf,
tennis..) or during any other activities that may create
vibrations, shocks, brutal accelerations and decelerations
Keep out of reach of babies and children.
Do not put your klokers under clear water. e pressure of
normal tap water may decrease waterproofness performance of
a watch conceived for the everyday life
Remove the watch before taking a bath or going into the sauna.
Do not turn or pull the crown when the watch head is wet, the
water could penetrate the watch. If the inner surface of the glass
is fogged, or if water drops appear inside the watch, this means
waterproofness has been diminished. Immediately contact the
retailer where you have purchased the watch.
Keep in mind waterproofness of a watch can be diminished by
the deterioration of the adhesive of the glass or the seal, or by
rust formation on stainless steel parts. Steam, soap, or some
components of a heat source can accelerate waterproofness
degradation.
Avoid wearing the watch or store it in the following places:
places in which volatile agents are sprayed (cosmetic products
such as solvents, insecticides, paint solvents, etc.), places in
which temperature remains below +5 °C or above 35 °C for a long
time; very damp places; places aected by a powerful magnetic
eld or static electricity; dusty places; places aected by strong
vibrations.
Do not put in contact with acid, acetone or any other chemical
product. In case of contact, immediately rinse with cold water
to minimise the impact.
Stop wearing the watch immediately if the case or the bracelet
is aected by corrosion.
If you notice any symptoms of allergy or skin irritation, stop
wearing the watch immediately and consult a dermatologist or
an allergist.