KMART 43018192 User manual

1
WOODEN CLIMBING FRAME INSTRUCTIONS
Keycode: 43018192
WARNING! Requires adult assembly only. Use only under adult supervision.
Not suitable for children under 3 years. Only for one child use.
WARNING! Not for commercial use. Do not repeatedly assemble and
disassemble the climbing frame. Do not jump on this product.
Contains functional sharp point. Make sure all screws, nuts and bolts are firmly
tightened before using the product. Only use on flat ground. Do not expose to
the sun. For indoor use only.
Not for children with a body mass of more than 30kg / 66.1lb.
Remove the wooden climbing frame and related pieces from the box. Set all the parts out
and read the assembly instructions prior to use. Keep the packaging until assembly is
complete.
CONTENTS:
The product consists of below components, please assemble each part step by step.
A. 2pcs Wooden panel
B. 12pcs Wooden support pole
C. 24pcs 6x38 Screws
D. 2pcs Fixing bolts
E. 4pcs Rubber label

2
Assembly Instructions
Fix one end of all 12pcs wooden poles to one panel, tighten half firstly, then fix
another end of poles to other panel.
Make sure each wooden pole is put correctly into the hole on panel and then tighten
all wooden poles firmly.
LOCKING HOLE
After assembling all wooden poles, use the bolt through the different locking hole on
top of panel to fix the climbing frame.
ANTI SLIP
Storage & Care Instructions
- Check and tighten all parts regularly.
- Keep away from water and direct sunlight.
- For indoor and domestic use.
MADE IN CHINA
FOR AU / NZ: IMPORTED FOR KMART
STORES IN AUSTRALIA AND NEW ZEALAND.
Put one end of the wooden pole to the hole
on panel then take the screws and pass them
through the hole, using the tool (screwdriver
or cordless drill) to tighten.
Note: Please do not tighten firmly before
all wooden poles are assembled.
Open
Folded
In order to ensure the climbing frame is stable
and non-slip, please stick the rubber stickers
to the bottom of the panels.