Basic Guidelines
.
X X
02
Installation
Leaning forward Falling behind
Take care not to place the panel in direct
sunlight. For seamless experience, the display
panel has to be mounted rmly. If needed, add
extra padding (ex: sponge) for support between
the panel and the wall to prevent it from shaking
while writing.
01 - Use M6 screw to x Kensington lock on the
device
02 - Measure and mark the top centre of the
display. Place the device rmly on the display
centre and use the clip and adhesive tape for
secure & safe positioning. Make sure the device is
not leaning forward or falling behind.
TutorPlus Lite Installation v1.0www.kneura.com
01
02
