KoamTac SKX SmartSled User manual

What’s in the Box? - Pistol Grip
1x Contact PCB (SKXPro or SKX5)
1x 6000mAh Li-Polymer Battery (optional)
SKXPro or SKX5
Companion Cushion
SKXPro
Contact PCB
SKX™SmartSled®
Pistol Grip/Extended Battery
Assembly Manual
*SKXPro/SKX5 sold separately.
Tweezers and PH0 screw driver (notincluded)
will be necessary to complete assembly.
* All pictures shown are for illustration purposes only.
Actual product may vary.
SKX5
Contact PCB
SKX 1-Slot Charging Cradle
SKX 5-Slot Charging Cradle
XCover 1-Slot Charging Cradle
XCover 5-Slot Charging Cradle
SKX Pistol Grip 1-Slot Charging Cradle
SKX Pistol Grip 5-Slot Charging Cradle
SKXSLED-mPOS
SKXSLED-MSRIC
1x Contact PCB (SKXPro or SKX 5)
What’s in the Box? - Extended Battery
SKXPro or SKX5
Companion Cushion
SKXPro
Contact PCB
SKX 5
Contact PCB
Contact PCB Assembly - SKXPro Only
Contact PCB Assembly - SKX5 Only
2. Remove the transparent protective tape from the back
of the companion cushion and attach it to the back of
the SKXPro as shown below. (C)
1. Remove the blue protective tape from the front of the
companion PCB. Next, attach the contact board to the
back of the SKXPro as shown below. (B)
Remove the blue protective tape from the front of the
companion PCB. Next, attach the contact board to the
back of the SKX5 as shown in the image. (D)
1x Companion Cushion (SKXPro or SKX5)
1x Companion Cushion (SKXPro or SKX5)
Using tweezers, carefully remove all four (4) screw caps
from the back of the SKX
™
SmartSled
®
. Then, remove all
(4) screws from the back of the SKX together with the
companion cover. (A)

20211115
Align the screw holes of the Pistol Grip Adaptor with
the screw holes of the SKX SmartSled. Use the four (4)
included screws to attach the Pistol Grip Adaptor to the
SKX SmartSled. (F)
Align the top notch of the Pistol Grip with the top notch of
the Pistol Grip Adapter. Slide the Pistol Grip up until
it clicks. (G)
Squeeze the tabs on both sides of the Pistol Grip Adapter
and slide the Pistol Grip down. Pull the Pistol Grip away
from the Pistol Grip Adapter and the SKX SmartSled. (H)
Pistol Grip AssemblyPistol Grip Adaptor Assembly
G
1. Turn the knob on the bottom of the Pistol Grip
counter-clockwise to open the battery door. (I)
2. Insert the battery into the Pistol Grip. (J)
6000mAh Li-Polymer Battery Assembly Instructions
IJ
3. Close the battery door and turn the battery door knob
clockwise to lock. (K)
K
Extended Battery Assembly
Align the top notch of the Extended Battery with top notch
of the Extended Battery Adaptor. Slide Extended Battery
up until it clicks. (L)
Removing Extended Battery
Squeeze the tabs on bothsides ofthe Extended Battery
Adaptor and slide the Extended Battery down. Pull the
Extended Battery away from the Extended Adaptor and
the SKX SmartSled. (M)
Pistol Grip Battery/Extended Battery
Indicator Status
LM
933332
* When Charging * When In Use