KoamTac Samsung Galaxy Tab Active3 SmartSled User manual

1x Galaxy Tab Active3 SmartSled Case
1x Hand Strap
HF RFID Companion
0.5W UHF RFID Companion
1.0W UHF RFID Companion
2000mAh Extended Battery Companion
Pistol Grip Companion (Battery optional)
5-Slot Battery Charger
KDC480 1-Slot Charging Cradle
KDC480 4-Slot Charging Cradle
KDC Pistol Grip 1-Slot Charging Cradle
KDC Pistol Grip 5-Slot Charging Cradle
6x Screws + 1 extra (if case only)
1x KDC480/485 and Type-C USB Cable
(if KDC480/485 is attached)
Samsung Galaxy Tab Active3®
SmartSled®Assembly Manual
* PH0 screwdriver may be needed for assembly/disassembly.
* All pictures shown are for illustration purpose only.
* Compatible with Tab Active3 and Tab Active2.

If your Galaxy Tab Active3 Case came preassembled with
a KDC480/485, please skip step 1 and proceed to step 2.
1. Carefully remove the black protective sticker from the
back of the KDC480/485. Use a Philips-head screwdriver
to fasten the KDC to the Galaxy Tab Active3 Case. (A,B)
2. Push both of the hand strap’s elastic loops through the
holes on the back left or back right side of the case. (C)
Adjust the length of the hand strap by repositioning the
elastic loops onto the various notches inside the case. (D)
3. With the home buttons to the right, fit the Galaxy Tab
Active3 bottom into the case, as shown. (E) Then, snap
the top corners into place. (F)
GTA-SLED_AM_20230523