Kodak EASYSHARE M5350 User manual

1
Table of contents
Getting started with your camera 2
Loading and charging the battery 2
Using an accessory SD/SDHC Card 5
Turning on the camera 6
Setting the language, date/time 7
Taking a picture or video 8
Reviewing pictures/videos 12
It’s never been easier to share 14
Installing software, transferring pictures 15
Product overview, features 17
Front view 17
Back view 18
Doing more with your camera 19
Using the flash 19
Using modes and effects 20
Using Program mode 22
Solving camera problems 23
Appendix 24
urg_01270.book Page 1 Wednesday, May 4, 2011 8:59 AM

2www.kodak.com/go/support
ENGLISH
1Getting started with your camera
Loading and charging the battery
Load the KODAK Li-Ion Rechargeable
Digital Camera Battery KLIC-7006.
2
Use the battery to
slide aside the
battery lock.
1
Slide open the
battery door.
urg_01270.book Page 2 Wednesday, May 4, 2011 8:59 AM

www.kodak.com/go/M5350support 3
ENGLISH
If your camera includes an in-camera charger
Watch the battery level See page 13
Purchase extra batteries www.kodak.com/go/accessories
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Maximize the number of pictures you can take–fully charge the battery
before using. (All rechargeable batteries lose power over time, even if
they’re not being used.) You can charge the Li-Ion battery whenever
necessary.
Turn off the camera.
1
Connect a KODAK Camera USB Cable, Micro B / 5-Pin and charger.
(Use only the cable included with this camera.)
2
Your charger
and plugs
may differ.
urg_01270.book Page 3 Wednesday, May 4, 2011 8:59 AM

4www.kodak.com/go/support
ENGLISH
If your camera includes an external battery charger
Charging via your computer’s USB port
1
Battery Charging light:
• Flashing green: charging
• Steady On green: finished charging
2
Your charger
and plugs
may differ.
1
2
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Turn off the camera.
Connect a KODAK Camera USB
Cable, Micro B / 5-Pin.
The camera charges when the computer is on and awake.
Turn off the computer’s hibernation, sleep, and
standby modes.
urg_01270.book Page 4 Wednesday, May 4, 2011 8:59 AM

www.kodak.com/go/M5350support 5
ENGLISH
Using an accessory SD/SDHC Card
Your camera has internal memory. We recommend purchasing an SD or
SDHC Card (Class 4 or higher) to store more pictures/videos.
CAUTION:
A card can only be inserted one way; forcing it may cause
damage. Inserting or removing a card while the camera is on
may damage the pictures, the card, or the camera.
IMPORTANT: When you turn on the camera, it checks to see if a card is
inserted. If so, new pictures/videos are stored on the card. If no card is
inserted, new pictures/videos are stored in the camera’s internal memory.
If pictures/videos are detected in internal memory and a card is inserted, the
camera prompts you to move the pictures to the card (and erase those in
internal memory).
Purchase cards www.kodak.com/go/accessories
1
Turn off the camera.
2
Insert a card until it clicks.
3
Turn on the camera.
To remove a card, press
and release it.
Optional accessory
urg_01270.book Page 5 Wednesday, May 4, 2011 8:59 AM

6www.kodak.com/go/support
ENGLISH
Turning on the camera
urg_01270.book Page 6 Wednesday, May 4, 2011 8:59 AM

www.kodak.com/go/M5350support 7
ENGLISH
Setting the language, date/time
See the Extended
user guide
www.kodak.com/go/M5350manuals
See How-To videos www.kodak.com/go/M5350demos
to change current field.
for previous/next field.
OK to accept.
At the prompt, press OK.
to change.
OK to accept.
Language:
Date/Time:
to highlight a site.
Sharing Destinations:
to check/uncheck a site.
Choose which sharing sites to offer when it’s time to share pictures/videos.
OK
When finished, highlight Done, then press OK.
urg_01270.book Page 7 Wednesday, May 4, 2011 8:59 AM

8www.kodak.com/go/support
ENGLISH
Taking a picture or video
See all picture modes page 19
See the Extended
user guide
www.kodak.com/go/m5350manuals
When you turn on the camera for the first time, it’s in
Smart Capture mode. (After that, the camera
“remembers” the last mode you used.)
1
Press the Shutter button halfway to focus
and set exposure. Framing marks indicate
the camera focus area. (If the camera is not
focusing on the desired subject, release the
Shutter button and recompose the scene.)
Compose the picture.
2
3
Press the Shutter button completely down.
Take a video
To stop recording, press and release
it again.
Press and release the Record button.
1
2
Take a picture
urg_01270.book Page 8 Wednesday, May 4, 2011 8:59 AM

www.kodak.com/go/M5350support 9
ENGLISH
Understanding the picture-taking icons
See the Extended
user guide
www.kodak.com/go/M5350manuals
See How-To videos www.kodak.com/go/M5350demos
Battery level
Pictures/video time remaining
Self-timer/
Burst
Flash mode
Most recent
picture/video
Settings
Zoom
slider
urg_01270.book Page 9 Wednesday, May 4, 2011 8:59 AM

10 www.kodak.com/go/support
ENGLISH
Customizing your camera
Press the Display button
Clean view and Tools view.
Sometimes, you want to see everything available.
(Other times, you want everything out of your way!)
to change between
Clean view
Tools view
(Tools vary by
camera mode.)
Tools
urg_01270.book Page 10 Wednesday, May 4, 2011 8:59 AM