Kodak Smile User manual

User Guide
KODAK SMILE
INSTANT PRINT DIGITAL CAMERA
Appareil photo numérique à impression instantanée
Fotocamera digitale a stampa istantanea
Digitale Sofortdruckkamera
Cámara digital con impresión instantánea
Guide de l'utilisateur
Guida utente
Benutzerhandbuch
Guía del usuario

2 | EN EN | 3
English
Français
Italiana
Deutsche
Español
TABLE OF CONTENTS
TABLE DES MATIÈRES  INDICE  INHALTSVERZEICHNIS  TABLA DE CONTENIDO
92
124
4
32
62

4 | EN EN | 5
INTRODUCTION
Thank you for purchasing the KODAK SMILE
Instant Print Digital Camera. This User Guide
is intended to provide you with guidelines
to ensure that operation of this product is
safe and does not pose risk to the user. Any
use that does not conform to the guidelines
described in this User Guide may void the
limited warranty.
Please read all directions before using the
product and retain this guide for reference.
This product is intended for household use
only. It is not intended for commercial use.
This product is covered by a limited one-year
warranty. Coverage is subject to limits and
exclusions. See warranty for details.
SPECIFICATIONS
• Dimensions: 4.875 L x 3.125 W x 0.938 H
(12.35 x 8 x 2.5 cm)
• Weight: 7.2 oz (204 g)
• Colors Available: Black/White, White/
Yellow, Blue, Green, Red
• Supported Storage: MicroSD™ cards up to
256GB
• Images: 10MP equivalent
• Battery Capacity: 700mAh
• Battery Type: Lithium-polymer
• Prints Per Charge: ~40
• Supported Photo Paper: KODAK ZINK 2 x
3 sticky-back photo paper
BOX CONTENTS
KODAK SMILE Instant Digital Camera
Charging Cable
Starter Pack of KODAK ZINK Paper
User Guide
SAFETY PRECAUTIONS
• Seizure warning: This device repeatedly
utilizes lashing LED lights which may
potentially trigger seizures for people
with photosensitive epilepsy and/or
other seizure disorders. User discretion is
advised.
• Do not attempt to disassemble this device
for any reason.
• Never leave your camera or the ZINK®
paper in an area that might become
extremely hot or where it will be exposed
to direct sunlight for a long time. This can
cause your camera to overheat or suer
other problems.
• Never handle the camera with damp or wet
hands. This could damage the camera or

6 | EN EN | 7
create the risk of electric shock.
• Do not use products such as alcohol,
gasoline, diluent, or any other organic
solvent when cleaning or attempting to
clean this product.
• Do not use this device in an environment
where it will be exposed to heavy dust or
humidity/moisture.
• Never drop or shake the camera, as
this could cause it to malfunction or
permanently damage the inside parts.
• Do not use this camera while bathing or in
a shower.
• Do not place or store the camera where it
can fall or be pulled into a tub or sink.
• Do not place, drop, or submerge the
camera in water or any other liquid.
• Take care that objects do not fall and
liquids are not spilled onto the camera.
PRODUCT OVERVIEW
Flash
Camera lens
Paper exit
Cover
panel

8 | EN EN | 9
Navigation
panel
Paper
tray door
release
Viewing screen
Shutter
button
Power indicator
LED
Speaker
Reset
button
Lanyard
attachment
Charging
indicator LED
MicroSD™
card slot Micro USB charging port

10 | EN EN | 11
NAVIGATION PANEL OVERVIEW
Buttons:
Menu : Pressing this button will take you to the main menu,
from which you can access the gallery, ilter, border, photobooth,
lash, and settings menus. The menu button also works as a back
button. Press it from any screen to go back by one screen. Press-
ing it while on the main menu will return you to the live viewinder.
OK: Press this button to conirm a choice or take a picture. In
certain scenarios, the OK button will also operate as a function
button (e.g., right after taking a picture, pressing the OK button
will take you to the edit screen).
: Use these arrow keys to navigate between options in menus,
as well as between photos in the gallery.
Print : Press this button while viewing a
photo to be taken to the print menu to begin
the process of printing your picture.
GETTING READY FOR USE
Charge the SMILE
Before using the camera, connect it to the
charger by plugging the micro USB cable
into the designated micro USB charging port
on the bottom and allow it to fully charge.
Always use the original charger that was
provided to ensure proper charging.
If the red indicator LED light is lashing, this
means that the battery is low and you should
plug the camera in for it to recharge. While
the camera is charging, the indicator LED will
be a solid red light. Once the process has
completed, the indicator LED will change to
a solid green light.
Load the Paper
Load your ZINK® paper into the camera:
Follow the steps below to quickly and easily
get your new camera loaded with ZINK®
sticky-back paper so you can start printing

12 | EN EN | 13
photos!
1. Open the paper tray in the back by
pressing down on the latch and pulling it
toward you.
2. Place the blue calibration sheet in the tray
with the barcode facing down. Place the
other plain sheets on top, with the glossy
side facing you. Try to avoid touching the
glossy side to prevent getting ingerprints
on the paper.
3. When you print your irst photo after loading
the ZINK® paper, the blue calibration sheet
will be slowly ejected from the printing slot.
4. Your photo will print after the calibration
sheet inishes.
Note: Only KODAK ZINK paper will work
in your KODAK SMILE camera. Other
branded papers are not compatible.
Power it On/O
To turn the camera on, slide the ridged panel
away from the center. This will expose the
navigation panel, camera lens, and lash, and
the LCD screen on the back will light up. The
camera will also beep a musical tune to let you
know it is powered on.
To turn the camera o, simply slide the panel
back toward the center.
Insert a MicroSD™ Card

14 | EN EN | 15
The camera has limited internal memory
and can only store three photos at a time; a
microSD™ card is necessary if you wish to
edit and save more than three photos to print
out later. The SMILE can perform without
a microSD™ card, but using one is strongly
recommended.
Insert the microSD™ card into the slot at the
bottom when the camera lens is exposed, with
the metal pins facing the front of the camera.
To remove, press the card in gently with your
ingernail, and it should pop out.
The SMILE supports microSD™ cards up to
256GB.
NAVIGATING THE MENU
There are six options on the KODAK SMILE
Camera menu, which is accessed by
pressing the top button on the navigation
panel and using the arrow keys to move
between options. This section will review
those options and their usage.
GALLERY
Select the Gallery icon from the main
menu to view your photos. From the Gallery
you can edit and print any photos you’ve
previously taken with your SMILE camera,
or any existing images already on your
microSD™ card.
After selecting Gallery from the main menu,
you will need to choose between photos
stored in internal memory and the SD card.
Make your selection, then use the arrow keys
to cycle through the photos you’ve taken.
The pictures will have two options at the
bottom: EDIT, and PRINT.
Press the OK button to enter the EDIT menu,
which will give you three options: ilter ,
border , and delete . Select Filter to
pick between ilter options for your photo.
Select Border to add a white border to
your photo, or keep it borderless. Select
Delete and you will be prompted one more
time to be certain you want to delete the
photo. Hit OK to delete the photo from your
SD card.
Hit PRINT at any time to print the photo as
is from your gallery. You will be asked to
conirm by hitting the OK button before the
photo prints out.
NOTE: Without a microSD™ card, the camera

16 | EN EN | 17
can only save the 3 most recent photos that
were taken. We highly recommend using a
microSD™ card to get the most out of your
KODAK SMILE Camera.
FILTER
The Filter menu oers a variety of ilters
to choose from that will be applied to your
photo. Press the OK button and then use the
arrows to navigate through the ilters
available. The LCD screen will give you a live
preview of that ilter; press the OK button
again to conirm and apply the ilter.
BORDERS
The Borders menu oers the option to add
a border to your photo. Press the OK button
to open the Borders menu.
The Borders menu gives you two options to
choose from: O and On.
• O: a photo with no border. If you choose
this option, you’ll be taken back to the live
viewinder.
• On: a photo with a border. If you choose
this, you’ll be taken to the live viewinder
with a solid white border around the im-
age. There will be an icon on the bottom
right side of the status bar in the live
viewinder to indicate your border status
as well. The border will stay applied until
you manually re-enter the border menu
and deactivate it, or until you turn the
camera o.
PHOTOBOOTH
The Photobooth menu allows you to print
out two photos side-by-side in the same
image.
• The live viewinder will give you guide-
lines to make sure your image its within
the space allotted, and there will be an
icon on the bottom right side of the status
bar in the live viewinder to indicate booth
mode status.
• Tap the shutter button once and you’ll see
guidelines for you to take your irst shot
on the screen. For the second shot, the
other side of the screen will be active, and
the irst image you captured will be visible
on the left side of the image.
• The camera will stay in photobooth mode
until you return to the border menu and
deactivate it, or until you turn the camera
o, so you can take as many photobooth

18 | EN EN | 19
style shots as you want!
FLASH
Use the arrows to highlight the Flash icon
and press the OK button to open the Flash
menu.
Use the arrows to cycle through the options:
Flash On , Flash O , and Auto Flash .
SETTINGS
The Settings menu allows you to access
and adjust multiple camera settings. The
options available in the settings menu are
as follows:
TIMER
Select the Timer icon from the settings
menu to set a timer for your next picture
(great for selies and group shots!) Choose
from timer settings of o, three (3) seconds,
or ten (10) seconds. When you take a photo
with the timer applied, the camera lash will
blink once each second as a countdown.
The timer will remain applied until you
manually re-enter the timer menu and turn
it o, or until you turn the camera o, so take
as many timed shots as you want!
LANGUAGE
Select the Language icon from the
settings menu to change the language
displayed on your camera. You may
choose from English, Spanish, and German
language options.
PRODUCT INFO
Select the Product Info icon from the
settings menu to view information about
your camera. The irmware version, serial
number, and color table version will all be
displayed here. You can press the menu
button to exit this page and return to the
VOLUME
Select the Volume icon from the settings
menu to open the volume menu. Use the
arrow keys to raise and lower the volume
of key presses and the shutter sound when
taking a picture.
AUTOPRINT
Select the Auto-Print icon from the
settings menu to turn auto-print on or o.
If auto-print is turned on, your pictures will
print out immediately after being taken. The
option will stay enabled until you disable it
from this menu.