Kogan ovela OVIFTOTRBEA User manual

INFLATABLE TODDLER TRAVEL BED WITH
SAFETY BUMPER AND ELECTRIC PUMP
OVIFTOTRBEA

•Spaces in and around the bed rails may allow young children and infants to
become trapped, presenting the risk of suffocation or strangulation.
•Never use with children below two years of age.
•Never use as a substitute for a crib.
•Never use unless the bed rail is tight against the mattress and at least 9 inches
from the headboard and footboard. Never fill gaps with pillows, blankets or other
items that can suffocate children.
•Never use on a toddler bed, bunk bed, waterbed, or bed with inflatable mattress.
Use only on an adult bed with a mattress and mattress support as defined by the
manufacturer.
•Discontinue use if damaged, broken or if parts are missing.
•Set up of the product and supervision of use must be conducted by an adult.
•This product is not a life-saving device.
•Ensure the product is correctly set up before use.
Notes:
•Always consider the temperature of the air going into the product and the outside
air. If the inflator is sending warm air into the product when it cools, it may seem like
the product is losing air. This is normal. The product should be firm when
completely inflated but allow a small depression when pushed on with a hand
while in use. Proper inflation should be checked often if the product is to be left
inflated for several consecutive days.
•To deflate the unit, uncap the valve to allow air to escape quickly and easily. Place
the deflation portion of the inflation/deflation device into the valve and remove all
remaining air. Full deflation will be complete when the unit is flat and wrinkled.
Replace the stem plug back into the valve.
•Wipe the product off with a terry cloth towel and allow to air dry completely. Store
for next use.
SAFETY & WARNINGS
WARNING: Ensure to read and understand these instructions before
assembling and using the product. Failure to follow these instructions
can result in serious injury or death.

•Do not over inflate. This is the major cause of leaks.
•Do not inflate using an air compressor or other high-pressure pump.
•This item is designed to handle a high volume of air but at low pressure.
•Read the warnings and instructions printed in this manual for proper inflation and
safe use.
•All set up including inflation should be done under adult supervision.
•Do not place the product near fire or other heat sources.
•Keep out of direct sunlight when not in use.
•This unit is intended for home and family use only and not for use in public areas or
rental homes.
•Do not allow children to play on the product until fully inflated.
•Do not over inflate. It should be firm but allow a small depression when pushed on
with a hand.
•Do not drag across concrete, cement, pavement, or other rough surfaces. Unfold
the inflatable flat on a clean and smooth surface, free of debris and sharp objects.
Inflation/Deflation
•Remove the valve plug from the valve and insert the appropriate attachment of the
inflation device. Inflate the mattress to 100% capacity or until almost firm.
•Close valve by inserting the stem valve plug into the valve and press firmly into
place until the valve is flush with the tube.
INSTRUCTIONS

If the Inflatable Toddler Bed is used regularly, it should be cleaned at least once a week. It is
also important to clean and dry the product before it is packed and stored.
When cleaning the product, do not use strong detergents or silicone-based products.
Do not use high-pressure cleaning equipment such as pressure washers. Excessive pressure
may damage the product.
Clean only the outside surface.
Clean the product with soap and freshwater and check that the valves are clean.
Maintenance
Maintenance is essential to further the lifespan of the product. Follow all maintenance and
repairs according to this guide. If you are unsure or have questions, please contact
Kogan.com support.
1. Check the product regularly for potentially unsafe conditions and possible misuse
of the product.
2. Do not use the product if repair is needed.
3. Clean the product regularly. (See Cleaning & Care above).
4. Ensure the area where the product is stored is pest-free and dry.
5. When disposing of the product, ensure it is disposed of in an environmentally
friendly manner in accordance with local regulations.
Repair
The Inflatable Toddler Bed includes a repair kit (2x PVC repair patches + 1 small bottle glue),
which can be used to easily repair minor punctures and cuts.
CLEANING & CARE

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com